Tender For Repair To Kitchen , Kitchen Sink Drain Board, Cabinets, Roof Repair In Md Accn Incl Repair/Replacement Internal Electrification And Allied Works Under Aor Of Ge (South) Pune
Tender Value
39.99 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
13 days left
EMD
79980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Kitchen , Kitchen Sink Drain Board, Cabinets, Roof Repair In Md Accn Incl Repair/Replacement Internal Electrification And Allied Works Under Aor Of Ge (South) Pune
BOQ
| Sl. No. | Item Description |
| 1 | S&F GI tubing tubes \\"medium grade\\" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc including taking up or down carefully steel tubing and connections complete all as specified and directed of the following sizes :- |
| 2 | (a) 15mm bore |
| 3 | (b) 20mm bore |
| 4 | (c) 25 mm bore |
| 5 | S&F in repairs Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed of following bore of pipe :- |
| 6 | (a) 15mm bore |
| 7 | (b) 20mm bore |
| 8 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades,shelves , lintels, etc.and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed. |
| 9 | S&F in repair vitreous china wash hand basin, white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, waste coupling 32mm bore of CP incl 15mm bore CP fancy type pillar cock etc all as specified and directed. |
| 10 | S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor including trap set in and including concrete cpmplet all as specified and directed. |
| 11 | S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices complete all as specified and directed. |
| 12 | S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, including flush pipe 32 mm dia. complete all as specified and directed. |
| 13 | S&F in repairs 15mm bore bib taps, brass chromium plated, cast copper alloy fancy type handle screwed down, screwed for iron pipes all as specified . |
| 14 | S & F in repairs 15 mm bore pillar taps,fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with long screwed shanks and fly nuts, complete all as specified and directed. |
| 15 | S & F in repairs 15 mm stop valves / angular stop cock, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed. |
| 16 | S&F in repairs CP Wall mixer 3-in-1 for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore of pipe complete all as specified and directed. |
| 17 | S & F in repairs 125 mm dia brass chromium plated shower rose including shower arm of approved quality complete all as specified and directed. |
| 18 | S & F in repairs CP health faucet (ABS Body) with 1 mtr long flexible cod complete all as specified and directed. |
| 19 | S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed. |
| 20 | S & F in repairs brass chromium plated Tubular towel rail 20mm dia \\"D\\" type 60cm long complete all as specified and directed. |
| 21 | S & F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed |
| 22 | S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 23 | S & F Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats fixed in repairs complete all as specified and directed. |
| 24 | S & F in repairs 600mm X 450mm X 5.5mm thick bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with aluminium beading all around complete all as specified and directed. |
| 25 | S& F in repair 5mm thick sheet glass corner shelf, 250mm radius including CP railing and CP brackets, complete all as speicified and directed. |
| 26 | S & F in repairs stainless steel kitchen sink without drainage board of 1 mm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets or fixed as in counter type in granite/ cudappa platform and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 27 | S & F Rotational moulded polyethylene water storage tank double layer ISI marked of capacity 500 Litre (cylindrical vertical with closed top) hoisted and fixed in position incl all necesarry GI fittings including dismantling of existing water tank complete all as specified and directed. |
| 28 | S & F Rotational moulded polyethylene water storage tank double layer ISI marked of capacity 1000 Litre (cylindrical vertical with closed top) hoisted and fixed in position incl all necesarry GI fittings including dismantling of existing water tank complete all as specified and directed. |
| 29 | S & F in repairs ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 15 mm bore complete all as specified and directed. |
| 30 | S & F in repairs ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete all as specified and directed. |
| 31 | S & F in repairs stainless steel gratings 100 mm dia with hole for waste pipe complete all as specified and directed. |
| 32 | M & L 75 mm dia of outlet PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed. |
| 33 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including taking down existing pipe complete all as speicified and directed.Note :- Rate quoted shall deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for elevated height upto 12 mtr height building. |
| 34 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall,including taking down existing pipe complete all as speicified and directed.Note :- Rate quoted shall deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for elevated height upto 12 mtr height building. |
| 35 | S&F 110mm bore PVC (SWR) bends / Tee with acess door, complete all as speicified and directed. |
| 36 | S&F 75mm bore PVC (SWR) bends / Tee with acess door, complete all as speicified and directed. |
| 37 | S&F in repapir plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed. |
| 38 | S&F in repairs HDPE PVC lid (cover) suitable for 500 ltr to 1000 Ltrs capacity PVC water tanks, complete all as speicified and directed. |
| 39 | S&F in repairs 2mm thick PVC fibre mirror cabinet of size (450x325x120mm ) and fixed to wall after taking down old mirror, complete all as speicified and directed. |
| 40 | M&L for coloured glazed ceramic designed tiles in vertical surface 600x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick plaster in CM 1:4 incl dismantling floor, hearth or wall tiling including taking down cement plaster, removing serviceable tiles to store and rubbish off the premises complete all as speicified and directed. |
| 41 | M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding g 0.06 sqm but not exceeding 0.11 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, incl dismantling floor, hearth , removing serviceable tiles to store and rubbish off the premises complete all as speicified and directed. |
| 42 | M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, incl dismantling floor, hearth, removing serviceable tiles to store and rubbish off the premises complete all as speicified and directed. |
| 43 | M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skiriting etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over 10mm thick plaster in CM 1:4 incl dismantling floor, hearth or wall tiling including taking down cement plaster, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 44 | M & L ( light shade) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 incl dismantling floor, hearth, removing serviceable tiles to store and rubbish off the premises complete all as speicified and directed.all as specified |
| 45 | M & L ( light shade) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over 10mm thick plaster in CM 1:4 incl dismantling floor, hearth or wall tiling including taking down cement plaster, removing serviceable tiles to store and rubbish off the premises complete all as speicified and directed.all as specified |
| 46 | M & L granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 15 mm thick, in CM 1:6 on stone /brick masonry / concrete surfaces including dismantling of stone slabs and rubbish off the premises complete all as speicified and directed.all as specified |
| 47 | Rounding edges of stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed. |
| 48 | M & L Machine cut cuddapa stone slabs one side polished 20 to 25mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 20mm screed bed in cement mortar (1:6) including dismantling of stone slabs and rubbish off the premises complete all as speicified and directed. |
| 49 | Cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment/surface and M&L for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. |
| 50 | Taking down shutters of any description exc 1.0 sqm but n.exc 2.00 Sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentry work and refixing at same opening complete all as specified. |
| 51 | Taking down shutters of any description exc 1.0 sqm and n exc 2 sqmtr complete all as specified & as directed |
| 52 | Taking down of chowkat with shutter nexc 1.50 sqm each without taking off shutters from the frame complete all as specified and directed. |
| 53 | Taking down of chowkat with shutter exc 1.50 sqm & nexc 4.0 sqm each without taking off shutters from the frame complete all as specified and directed. |
| 54 | S&F 35 mm thick factory made 2nd class hardwood gauged and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part-I Section 8 cluse 8.24(a) and Fitted to chowkats complete all as specified and as directed. |
| 55 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant |
| 56 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having min density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 ,laminated on both face wooden texture, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (rate inclusive of SS hinges 100 mm-03 nos/ shutter) |
| 57 | Supply and fix 100mm size of butt hinges, medium weight cold rolled mild steel complete all as specified and as directed. |
| 58 | Supply & fix aluminium anodised sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified. |
| 59 | Supply and fix 150mm size extruded aluminium alloy tower bolt fabricated type anodised complete all as specified. |
| 60 | Supply and fix 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified. |
| 61 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 62 | S&F in repairs 150mm size extruded aluminium alloy tower bolt fabricated type anodised complete all as specified. |
| 63 | S&F in repairs 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified. |
| 64 | S & F in repairs aluminium anodised sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified. |
| 65 | S&F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 66 | S&F in repairs 100 mm size stainless steel fancy type handles complete all as specified. |
| 67 | S &F in repairs 20 mm bore aluminium powder coated curtain rod complete all as specified and as directed. |
| 68 | S &F in repairs aluminium powder coated fancy type bracket suitable for 20 mm bore curtain rod complete all as specified |
| 69 | S&F stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples to steel or wooden windows/door/shutters/frames etc. complete all as specified and as directed. |
| 70 | S&F in repairs, stainless steel plate rack of size 36inch x 39 inch x 10inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. |
| 71 | S & F 18 mm thk PVC sheet shutter one side prelim of any shade as in cupboard or kitchen cabinet etc complete all as specified. |
| 72 | S & F Continuous (piano) hinges 30 mm width of flap,mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 73 | S & F Magnetic door catches for cupboard/cabinet etc complete all as specified and as directed. |
| 74 | S&F 100mm dia Brass handles, cast type, polished bright cupboard handles fixed with nuts screws and washer complete all as specified and directed. |
| 75 | M&L for running welding in repairs not exc 6mm thick plates and angles complete all as specified and as directed. |
| 76 | S&F in repairs three track sliding window with two or more shutter with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724(e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. |
| 77 | S & F in repairs ventilators/louvers using 4mm thick x 10cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed(a) SP : 20048(b) Glazing clips : 19352 |
| 78 | S&F in repair Floor door stopper of aluminium alloy body double tongue annodised with rubber shoe and fixed of size 140 mm all as specified and as directed. |
| 79 | M&L for preparing new surfaces of wood of any description no otherwise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 80 | M&L for MS framed work conforming to grade E-165 (Fe-290) or Fe-310-O of MS angle or other sections, such as grills, gratings with ends of bar shouldered and / or riveted or forged into spikes; framed guard bars; railings and like incl dismantling old existing grill/ grating wk or wrought iron work of any desc and any position, gates etc completed all as directed by Engineer-in-charge. |
| 81 | S&F framed work for doors or gate of angle, plain sheet or other sections etc. complete drilled for fixing of steel sheeting, incl necessary welding etc of grade Fe-410-w(Gde-E-250 quality B) complete incl dismantling structural steel incl doors or wrought iron work of any desc and any position, gates etc |
| 82 | Dismantling timber scantling in any position (unframed wok) exc 40sqcm in section complete all as specified and directed. |
| 83 | Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails, trusses and guides for sliding doors; sun shades, Cooler platforms etc fixed with angle cleats, fastners or other connecting plates Fe 410 -W(GdeE- 250) quality A |
| 84 | S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws incl dismantling of old U/S roof sheet of any description and removal from site complete all as specified and directed. |
| 85 | S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick , 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / ridgesl incl dismantling of old U/S roof sheet of any description and removal from sitefixed with self tapping screws complete all as specified and directed. |
| 86 | M&L for preparing new surfaces of steel over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamal (ordinary tint) over a coat of red oxide primer all as specified and as directed. |
| 87 | M&L in repair for Gypsum ceiling board for ceiling prepainted, perforated finish, 595 x 595 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light at as specified and directed. |
| 88 | M & L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw (as per manufacturers instructions) to Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including 2 mm thick putty and two coats of oil bound distemper over primer on ceiling including dismantling of existing false ceiling with gridcomplete all as specified and directed. |
| 89 | M & L for decorative POP cornices/moulding of pattern as per approved by Engr-in-charge of cross section area exc 13 Sqcm and not exc 25 Sqcm including two coats of oil bound distemper over primer on ceiling complete all as specified and directed. |
| 90 | Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power) etc complete and making good disturbed surfaces of walls, floors etc complete all as specified and as directed. |
| 91 | Taking down unserviceable main switches, DBs, bus bars chambers including all fittings and fixtures such as MCBs,isolator, etc complete all as specified and as directed by Engineer-in charge.. |
| 92 | Taking down existing unserviceable sub main wirings with PVC conduits / PVC casing-caping and making good disturbed surfaces complete all as specified and as directed by Engineer-in charge. |
| 93 | M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated, multistranded, single core unsheathed, copper conductor cables (FRLS) drawn through and including surface type in PVC Conduits with all accessories complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable (FRLS) green in colour as earth continuity wire connecting to common earth point including 1.6 mm thick mild steel sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of steel screws for mounting switches, sockets, regulators etc complete for one light/fan/bell point controlled by one ,one way switches complete all as specified and as directed by Engineer-in charge. |
| 94 | All as per item No. 88 above but One light point controlled by 2- way switches, with cables 1.5 sqmm size.complete all as specified and as directed by Engineer-in charge. |
| 95 | All as per item No. 88 above but one 5 Amps 3/5 pin socket outlet on the same board with other switches. |
| 96 | All as per item No.88 above but one 5 Amps 3/5 pin socket outlet on independent board. |
| 97 | All as per item No. 88 above but wiring with 2.5 sqmm copper cables with 2.5 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on independent board. |
| 98 | All as per item No. 88 above but wiring with 4 sqmm copper cables with 4 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on independent board. |
| 99 | M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated, multistranded, single core unsheathed, copper conductor cables (FRLS) passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable (FRLS) green in colour as earth continuity wire connecting to common earth point including including 1.6 mm thick mild steel sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of steel screws for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and as directed by Engineer-in charge. |
| 100 | All as per item No 94 here-in-before but one 5 Amps 3/5 pin socket outlet on the same board with other switch. |
| 101 | All as per item No 94 here-in-before but one 5 Amps 3/5 pin socket outlet on independent board. |
| 102 | All as per item No. 94 above but wiring with 2.5 sqmm copper cables with 2.5 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on independent board. |
| 103 | All as per item No. 94 here-in-before but wiring with 4 sqmm copper cables with 4 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on indipendent board. |
| 104 | All as per item No 94 here-in-before but wiring in existing conduit / casing caping for one light/fan/bell point controled by one , one way switch 5 Amps . |
| 105 | All as per item No 94 here-in-before but wiring in existing conduit / casing caping for one 5 Amps 3/5 pin socket outlet on the same board with other switch. |
| 106 | All as per item No 94 here-in-before but wiring in existing conduit / casing caping for one 5 Amps 3/5 pin socket outlet on independent board. |
| 107 | All as per item No. 94 here-in-before but wiring in existing conduit / casing caping for wiring with 4 sqmm copper cables with 4 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on indipendent board. |
| 108 | S&F switch piano, flush button, 5/6 Amps single pole, one way, 230 Volts.complete all as specified and as directed by Engineer-in charge. |
| 109 | S&F Switch piano, flush button, 5/6 Amps, single pole, two way, 230 Volts complete all as specified and as directed by Engineer-in charge. |
| 110 | S&F socket outlet, 3/5 pin, 5 Amps, flush type. complete all as specified and as directed by Engineer-in charge. |
| 111 | S&F switch socket combination, 3/5 pin, 5 Amps, flush type. Complete all as specified and as directed by Engineer-in charge. |
| 112 | S&F Switch socket combination multi-purpose 3pin, 15 Amp and 3 pin, 5 Amps complete all as specified and as directed. |
| 113 | S&F Ceiling rose surface bakelite 65x50 mm, two to three terminals.complete all as specified and as directed. |
| 114 | S & F Bell push,flush type,5 Amp. complete all as specified and as directed. |
| 115 | S & F stepped type electronic fan regulator flush type 220 Volt on the existing phenolic laminated sheet etc all as specified and as directed. |
| 116 | M&L point wiring with 1.5 Sqmm (nominal area), PVC insulated, multistranded, single core unsheathed, copper conductor cable (FRLS) drawn through and including Concealed in PVC Conduits with all accessories complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable (FRLS) green in colour as earth continuity wire connecting to common earth point including 1.6 mm thick mild steel sunken boxes /Modular Metal flush box of suitable size for mounting switches, sockets, regulators etc complete for one light/bell point /ceiling fan/ exhaust fan controlled by one ,one way switches complete all as specified and as directed by Engineer-in charge. |
| 117 | All as per item No. 111 above but one 5 Amps 3/5 pin socket outlet on independent board. |
| 118 | All as per item No. 111 here-in-before but one 5 Amps 3/5 pin socket outlet on the same board with other switches. |
| 119 | All as per item No. 111 here-in-before but wiring with 4 sqmm copper cable with 4 Sqmm copper cable as continuous earth wire for one 5/6 pin /16 Amps socket out let on independent board. |
| 120 | S&F Modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 121 | S&F Modular switch 1 way 16A, 1 module complete all as specified and directed. |
| 122 | S&F modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed. |
| 123 | S&F modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 124 | S&F modular type fan regulator 120 Watts , 2 module , complete all as specified and directed. |
| 125 | S&F modular type bell push switch , 1 module , complete all as specified and directed. |
| 126 | S & F modular white cover plate with frame, 2 module complete all as specified and as directed. |
| 127 | All as per item No 121 above but 3 module |
| 128 | All as per item No 121 above but 6 module |
| 129 | All as per item No 121 above but 8 module |
| 130 | S & F Buzzer,Ding Dong AC,230 volts,single pole.complete all as specified and as directed. |
| 131 | S & F LED batten suitble for indoor application 20 W, 4' length , wall mounted with polycarbonate housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down old complete all as specified and as directed by Engr-in-Charge. |
| 132 | S & F LED batten suitble for indoor application 10 W, 2' length , wall mounted with polycarbonate housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down old complete all as specified and as directed by Engr-in-Charge. |
| 133 | M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 4 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked PVC casing and capping with all necessary accessories complete all as specified and as directed. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC casing andcapping with all necessary accessories will be measured as one length). |
| 134 | M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC casing and capping with all necessary accessories complete all as specified and as directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC casing and capping with all necessary accessories will be measured as one length). |
| 135 | M&L sub main wiring surface type/ concealed type as required at site with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 4 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and as directed. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length). |
| 136 | M&L sub main wiring surface type/conealed type as required at site with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and as directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length). |
| 137 | Supply and fix in repair single pole and neutral enclosures with a two pin and earth plug and socket complete with one double pole MCB 20 A , 240 V complete all as specified and as directed. |
| 138 | S&F Factory made board distribution in sheet steel enclosure with 200 Amps rated bus bar SPN, 4 way double door 240 Volts suitable for fixing MCBs.complete all as specified and as directed by Engineer-in charge. |
| 139 | S&F sheet metal enclosure, (for DB's when MCBs to be used), flushed in wall single pole and neutral Double door, 8 way, 240 Volts with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed. |
| 140 | S&F MCB, SP, 240 Volts, 5 to 32 Amps. 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete all as specified and as directed |
| 141 | S&F MCB, SPN, 240 Volts, 5 to 32 Amps. 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole and neutral in the MCB DB complete all as specified and as directed |
| 142 | S&F MCB, SPN, 240 Volts, 40 to 63 Amps. 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole and neutral in the MCB DB complete all as specified and as directed |
| 143 | S&F high speed wall mounted fan of sweep 400 mm, full copper motor, auto thermal overload protection,compact style and powder coated guards & pull cord switch for speed regulation and oscillation control including connectng up the power cord to the socket and necessary fixing accessories all as specified and directed. |
| 144 | Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motorcomplete including connecting with 3 core flexible copper conductor including taking down the existing ceiling fan and depositing the same in MES store complete all as specified and as directed. |
| 145 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete including connecting with 3 core flexible copper conductor including taking down the existing exhaust fan and depositing the same in MES store complete all as specified and as directed. |
| 146 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm complete including connecting with 3 core flexible copper conductor including taking down the existing exhaust fan and depositing the same in MES store complete all as specified and as directed. |
| 147 | S&F electric water heater storage type steel body/fibre body with copper/GRP inner tank and heating element upto 02 KW capacity 25 litres , BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection pies etc. including taking down the existing geyser and depositing the same in MES store complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender