Tender For Redevolopment Of Common Space Behind Auditorium At Cgra Meenambakkam Under Ge (I) Cg Chennai
Tender Value
32 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
14 days left
EMD
64000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Redevolopment Of Common Space Behind Auditorium At Cgra Meenambakkam Under Ge (I) Cg Chennai
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in Soft and loose soil complete all as specified and as directed. |
| 2 | Excavating in trenches n. exc 1.5m wide and n. exc 1.5m in depth for foundationetc for shafts, wells, cesspits, manholes, pier holes etc n. exc 10 Sqm on plan and n. exc 1.5m in depth and getting out in any type of soil complete all as specified and as directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeeding 25cm complete all as specified and as directed. |
| 4 | Removing excavated spoil to a distance exceeding 250 Mtrs but not exceedng 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 5 | Material and labour for providing cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 6 | Material and labour for Hard core of broken granite stone broken to gauge not exceeding 63mm, deposited, spread, levelled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 7 | Material and labour for providing 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base of floors complete all as specified and as directed. |
| 8 | Material and labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 9 | Material and labour for laying of machine pressed precast concrete interlocking paver block, 60 mm thickness, M-35 grade with grey cement and pigments of any shape and size confirming to IS 15658-2006 over compacted sand cushioning all as specified and as directed by the Engineer-in-charge.Note: Sand cushioning shall be measured and paid separately. |
| 10 | Material and labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed. |
| 11 | Material and labour for Use and waste of form work to sides of concrete foundations, footings, bases of columns, plinth beams and similar work to rough finished surfaces complete all as specified and as directed. |
| 12 | Material and labour for RCC M20 Nominal mix in 1:1.5:3, type A1 using 20mm graded stone aggregate as in Foundations, including rafts,footings,foundationbeams; plinth beams; bases for columns, etc.basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.Note: Reinforcement bars shall be measured and paid separately. |
| 13 | Material and labour for RCC M20 Nominal mix in 1:1.5:3, type A1 using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed.Note: Reinforcement bars shall be measured and paid separately. |
| 14 | Material and labour for RCC M20 Nominal mix in 1:1.5:3, type A1 using 20mm graded coarse aggregate as in chajja and lintels etc., complete all as specified and as directed.Note: Reinforcement bars shall be measured and paid separately. |
| 15 | Material and labour for form work to sides of concrete foundations, footings, bases of columns, plinth beams and similar work to rough finished surfaces complete all as specified and as directed. |
| 16 | Material and labour for Fair finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions complete all as specified and as directed. |
| 17 | Material and labour for Fair finished flat Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc., complete all as specified and as directed. |
| 18 | Material and labour for High Strength Deformed Steel Bars produced by Thermo Mechanical Treatment process [TMT] steel bars of grade Fe-500D in reinforcement, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed. |
| 19 | Material and labour for High Strength Deformed Steel Bars produced by Thermo Mechanical Treatment process [TMT] steel bars of grade Fe-500D in reinforcement, 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed. |
| 20 | Material and labour for High Strength Deformed Steel Bars produced by Thermo Mechanical Treatment process [TMT] steel bars of grade Fe-500D in reinforcement, 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 21 | Supply only integrated water proofing componud conforming to IS-2645 |
| 22 | Material and labour for plain cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate as in copings, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified and as directed. |
| 23 | Material and Labour for rendering 15 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 24 | Material and labour for rendering in Cement Mortar 20mm thick in two coats, i.e, in Cement Mortar 1:4, 10mm thick mixed with water proofing compound as per manufacturers' instructions over in Cement Mortar 1:6, 10mm thick on fair faces of brick/concrete surfaces, finished even and fair externally all as specified and as directed.Note: WPC will be measured and paid separately. |
| 25 | Material and Labour for Moorum/red bajri filling in floors or pavings, laid in layers exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 26 | Supply and fix of MS Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed. |
| 27 | Supply and fix Pre-painted galvalume aluminum and zinc alloy coating steel based corrugated steel sheet 0.50mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, cut as per site requirement, fixed with self drilling/self tapping screws and 15cm end lap with EPDM seal etc., complete all as specified by manufacturer specification and as directed. |
| 28 | Material and labour for Preparing new surfaces of steel of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 29 | Material and labour for Preparation newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant priming coat complete all as specified and as directed. |
| 30 | Material and labour for coloured Vitrified Ceramic tiles of grade B-I (a),10 mm thick (square/ rectangular) polished, light shade, area of each tile not exceeding 0.36 sqm, laid in floors of pattern as approved over and including 20mm thick screed bed in Cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed. |
| 31 | Material and labour for coloured Vitrified ceramic tiles of grade B-I(a), 10mm thick polishied, area of tile not exceeding 0.36sqm of size matching to floor tile as approved by GE, fixed in vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over a backing coat in Cement Mortar 1:4, 10mm thick on fair faces of brick or concrete surfaces all as specified and as directed. |
| 32 | Material and labour for 16-18mm thick coloured marble slab (Makarana) of size not less than 1 Sqm each, machine cut as in cooking platform or in any position, set and bedded in gray cement slurry over & including 15mm thick screed in cement mortar (1:4) and pointed in white cement with admixture of pigment to match the shade of marble including cutting, polishing (mirror type) complete all as specified and as directed. |
| 33 | Supply and Fix Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks,1000 litres capacity, three layered (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement, making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) complete all as specified and as directed. |
| 34 | Supply and fix Stainless steel kitchen sink of over all size 914mm x 460mm or next higher size with drain board and bowl size 410mm x 330mm x 160mm made out of 1mm thick stainless steel sheet of grade AI SI-304 with plugs, washers, waste coupling and 40mm dia waste pipe, fixed over CI brackets or bedding in cement mortar to dwarf wall as required and connecting union to pipe etc., compete all as specified and as directed. |
| 35 | Material and labour for preparation of newly plastered surface of walls including pilasters and cornices etc., and Distempering two or more coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of wall care putty 1.5mm thick all as per manufacturer's specification etc., complete all as specified and as directed. |
| 36 | Supply only PVC waste pipe/Flush pipe 32 mm dia, 600mm long for urinal/WHB/Sink with fitting etc., complete all as specified and as directed. |
| 37 | Material and Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., of thickness not less than 1.6mm (16Gauge) including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement etc., complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender