Tender For Comprehensive Repairs/Maint To Certain Bldgs At Otm Of Arty Static Wksp And Asc Supply Coy In Age B/R Hl Under The Aor Of Ge Deolali.
Tender Value
48.50 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
14 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repairs/Maint To Certain Bldgs At Otm Of Arty Static Wksp And Asc Supply Coy In Age B/R Hl Under The Aor Of Ge Deolali.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of stone slab and tiles laid bedded and pointed in any mortar description or thickness in floors, apron etc Complete all as specified. |
| 2 | M & L for Machine cut kota stone slab flooring 18-20 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete complete all as specified. |
| 3 | All as per item no -2 but as a skirting complete all as specified. |
| 4 | M & L for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes Complete all as specified and directed. |
| 5 | M&L for non skid joint free ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.18 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 6 | All as per Sl item No 5 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 7 | M&L for 8mm thick (square/rectangular) Vitrified ceramic tiles area of each tile exc 0.18 sqm not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 8 | All as per Sl item No 7 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 9 | M&L for 8mm thick (square/rectangular) Vitrified ceramic tiles GVT area of each tile exc 0.36 sqm but not exc 1.0 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 10 | All as per Sl item No 9 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 11 | M&L for non skid ceramic tiles of size 6-7mm thick (coloured) (Square/rectangular) area of each tile exc 0.09 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 12 | M&L Glazed ceramic coloured tiles of size 450x300x7mm thick on vertical surfaces of walls such as skirting dado etc over 10mm thick back coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete. |
| 13 | M & L for chequered cement concrete tiles 30cm x 30cm x 20mm thick Rouber moulded with grey cement and pigment, including 15mm thick scred in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and as directed. |
| 14 | M&L for non abrasive paving (Rectified Endura) cement conrete coloured tiles 300 x 300mm x 8-10mm thick machine pressed, set and jointed and pointed in neat cement slurry as in floor/skirting mixed with grey cement and pigment match the colour as in pavements, including 15mm thick scred in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and as directed. |
| 15 | M&L for precast cement concrete interlocking tiles 60 mm thick Rouber mould with strength M-35 N/sqmm as in floor/pavement laid dry to the profile including 30mm thick stone dust sand cushioning complete all as specified and as directed. |
| 16 | M&L for Granite 16-18 mm thick Z black superiour quality machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types complete all as specified and as directed. |
| 17 | M & L for Machine cut cudappa stone slab 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 18 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified. |
| 19 | S&F for prelaminated particle board 18/19 mm interior grade prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screw timber frame work Including dismantling board all as specified. |
| 20 | S&F in repair continuous (paino) hinges, mild steel, bright finish or electrogalvanised width of flap (when open) in 40mm all as specified. |
| 21 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel bright finished all as specified. |
| 22 | S&F Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixing complete all as specified. |
| 23 | Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 15 mm dia pipe complete all as specified . |
| 24 | Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 20mm dia pipe complete all as specified . |
| 25 | S & F 16mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fixed to walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings) |
| 26 | S & F 20mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fixed to walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings) |
| 27 | S & F in repairs 15 mm dia Stop valves/Angle valve, cast copper alloy, screwed down, high pressure, fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 28 | S & F in repairs 15 mm dia bib taps, cast copper alloy fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified. |
| 29 | S & F in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated with fancy type, screwed down high pressure, with or without lettered 'Hot' or ' Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified. |
| 30 | S & F in repairs Vitreous China wash basin, white, flat back, size 580 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with 32 mm dia Waste fittings, brass, chromium plated with waste pipe complete all as specified. |
| 31 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), EWC white including connection to drain (or outgoing pipe) and to flushing pipe with and including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified. |
| 32 | S & F 32 mm dia Low density polyethylene pipes ( LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified. |
| 33 | S & F in repair chromium plated Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified. |
| 34 | S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete as fixed complete all as specified. |
| 35 | S & F in repairs 10 Litrs PVC valveless,low level flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern complete all as specified. |
| 36 | S & F in repairs Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified. |
| 37 | S & F 75 mm dia PVC ( SWR ) floor trap, plain with grating including jointing with solvent cement complete all as specified. |
| 38 | S & F PVC connections15 mm size with PTMT nuts of length 450 mm complete all as specified. |
| 39 | S&F in repair Vitreous China Urinal, Half stall type, white, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, CP urinal & spreader etc pointing around urinal back in cement, including waste pipe, CP urinal spreader complete all as specified and as directed. |
| 40 | S&F soap dish chromium plated and type fixed to plugs with CP brass screw fixed in repairs. |
| 41 | S&F in repair CP Basin Mixer for mixing hot & cold water of approved quality. |
| 42 | S & F floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm.as in repairs complete all as specified. |
| 43 | S & F in repairs ball valve high pressure of PTMT wiyh epoxy coated , aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete.( 210 gms weight ) complete all as specified. |
| 44 | S&F in repair 15 mm any type of spandle for stop cock, bib tap, pillar tap, wash basin mixer and wall mixer etc all as specified and directed . |
| 45 | S&F in repairs chromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs. |
| 46 | S&F in repair 8mm thick corner glass shelf fixed with brackets and including chromium plated brass screws and wooden/plastic cleats all as specified and directed . |
| 47 | S&F looking mirror of size (600x450) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial, plywood and fixed to wooden plugs with chromium plated brass screws and cup washers as directed . |
| 48 | S&F in repair PVC jet for pedestial pattern water closet of 15mm bore and 900mm long all as specified. |
| 49 | M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor upto 1.50 Sqm complete all as specified and as directed. |
| 50 | M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor/kitchen upto 0.5 Sqm complete all as specified and as directed. |
| 51 | S&F Health faucet(ABS body mild steel chromium plated suitable for 15mm dia pie with 1.25m long flessible pipe & ABS hook including making connection and fixed in repairs complete all as specified and as directed. |
| 52 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed. |
| 53 | Dismantling of Single layer Mangalore pattern or similar tiles in roofing including ridge complete all as specified. |
| 54 | Dismantling of battens for tiles, singles etc, of any size including tiling fillets exc 15 cm complete all as specified. |
| 55 | Dismantling unframed work of timber scantlings 40 sq.m and over in any section, in any position complete all as specified. |
| 56 | S & F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt weided tubes conforming ti I.S 1161-1998 grade St 240 complete all as specified. Please Enable Macros to View BoQ information |
| 57 | S & F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt weided tubes conforming ti I.S 1161-1998 grade St 240 complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender