Tender For Repair /Maint Of Lt Ug Cable, Apfc Panels, Lt Poles, External Water Supply, Rising, Distribution Pipeline , Cleaning/Painting Of Oht/Ug Sumps And Other Allied Works At Af Stn Dadri Under Aor Of Ge (Af) Faridabad
Tender Value
40 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
6 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair /Maint Of Lt Ug Cable, Apfc Panels, Lt Poles, External Water Supply, Rising, Distribution Pipeline , Cleaning/Painting Of Oht/Ug Sumps And Other Allied Works At Af Stn Dadri Under Aor Of Ge (Af) Faridabad
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in soft/loose soil not exceeding 1.50 Mtrs wide and not exc. 1.5 Mtr deep and getting out for taking out/laying cable, poles &stay etc complete all as specified and directed. |
| 2 | Returning, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid tested complete all as specified and directed. |
| 3 | Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed. |
| 4 | M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm, complete all as specified and directed. |
| 5 | M&L for brick laid in trenches for cable protection of burnt clay sub class ‘B’ complete laid dry flat, complete all as specified and directed. |
| 6 | Taking out old unserviceable LT under ground cable any type from trenches,pipes & poles complete all as specified and directed. |
| 7 | Supply laying and testing of XLPE LT 1100 Volt Grade, armourd under ground cable size of 10 Sqmm 2 core with stranded aluminium conductor in trenches /passing through pipes/ on poles etc complele all as specified and directed. |
| 8 | All as per srl item No 07 above but 16 Sqmm 2 core |
| 9 | All as per srl item No 07 above but 16 Sqmm 4 core |
| 10 | All as per srl item No 07 above but 25 Sqmm 4 core |
| 11 | All as per srl item No 07 above but 50 Sqmm 3.5 core |
| 12 | All as per srl item No 07 above but 70 Sqmm 3.5 core |
| 13 | All as per srl item No 07 above but 95 Sqmm 3.5 core |
| 14 | All as per srl item No 07 above but 120 Sqmm 3.5 core |
| 15 | All as per srl item No 07 above but 185 Sqmm 3.5 core |
| 16 | Supply & jointing heat shrinkable straight through joint suitable for LT 1100 Volt grade XLPE cable of size 240 sqmm 3.5 core complete all as specified and directed. |
| 17 | All as per item No 16 above but suitable for cable size 150-185 sq mm |
| 18 | All as per item No 16 above but suitable for cable size 70-120 sq mm. |
| 19 | All as per item No 16 above but suitable for cable size 25-50 sq mm. |
| 20 | M&L for galvanised steel tube, light grade with all fitting complete laid in trenches/ road / Path/ on pole of 80 mm bore complete all as specified and directed. |
| 21 | All as per item No 20 above but 50mm bore |
| 22 | All as per item No 20 above but 40mm bore |
| 23 | Dismantling concrete poles/steel tubular poles ,struts of any size complete all as specified and directed. |
| 24 | Supply, install erect in trench vertical position steel tublar swan neck seweaged welded poles complete with MS base plate of 6mm thick of size 450mm x 450mm final taper plug pole cap bolt nut and screwed, pole made out of ERW MS tubing confirming to IS 2713 Part II of 8.5 mtr long 410 SP-22 including drilling of holes of required size and nos for fixing of cross arms bracing support/ taking out of cables etc, with inbuilt junction box for 3 phase 4 wire AC supply and painting with one coat of red oxide primer and two coat of aluminium paint for exposed surface and two coat of black bituminious paint for the portion embeded in concerete complete all as specified and as directed by Engineer -in-charge including necessary PCC in foundation and coping all as per SSR part-I . Location- SP 33, SP 345, SP 232,SP 29,SP 69,SP 163,SP 66,SP 47,SP 50,SP 44,SP 55 |
| 25 | M &L in replacement of lugs/thimbles at termination of LT cable by cutting the end portion and removing insulation and fixing new aluminium lugs /thimble properly with crimping tool of size 185 -400 sq mm complete all as specified and directed. |
| 26 | All as per item No 25 above but for cable size 50-150 sq mm |
| 27 | All as per item No 25 above but for cable size upto 35 sq mm . |
| 28 | Material and labour for preparation of old painted / rusted surfaces by scrapping of steel tubular LT pole 9 mtr long inculding cross arms and clamps of any size and applying one coat of aluminum paint (1st quality) including white /blue 30 cm wide strip upto the height of 1.5 mtr above ground level and marking the pole No in 4” dia white paint complete all as specified and directed. |
| 29 | M&L for augering of holes in true horizontal position under road /pavement by means of mechanical rig after doing ultrasound technique to prevent any damage to existing cables/pipe lines coming in route 1.5 Mtr deep and not exceeding 15 Mtrs long including laying HDPE pipe of 150mm dia complete all as specified and directed. |
| 30 | S&F in replacement of MCCB 400 Amps FP 415 volts 3 phase 50 HZ,Ics=100%Icu , breaking capacity 36 KA complete all as specified and directed. |
| 31 | All as per item No 30 above but 250 Amps 36KA. |
| 32 | All as per item No 30 above but 200 Amps 36 KA. |
| 33 | All as per item No 30 above but 125 Amps 16 KA. |
| 34 | All as per item No 30 above but 63 Amps 16 KA . |
| 35 | M&L for defect rectification LT cable laid in trenches by locating fault with the help of electronic fault locating machine comprising of surge generator pulse, ECHO fault locator with high frequency distance calculator etc.including and additional excavation in normal strata required for exposing the cable fault removal of deteriorated portion of cable treating of cable and keeping the same ready for jointing work for cable of size up to 400 Sq mm 3.5 core. The fault locating equipments will be brought to site within the hours of instruction from Engr-in-Charge |
| 36 | M & L for welding hinges to existing panel board with existing shutters and fixing to panel board complete all as specified and directed. |
| 37 | M & L for replacement of shutter of with 3 mm thick CRCA sheet as per existing Size to match with the existing panel and welding hinges and fixing complete all as specified and directed. |
| 38 | M & L for painting of existing LT panel with spray gun with paint to match with the existing colour/surface complete all as specified and directed. |
| 39 | S&F in replacement of degital type time switch 3P module, DIN 24 hours programmable every 1 minutes with 28 memory location of current capacity 16 Amps with one change over including connecting to existing power contactor complete all as specified and directed. |
| 40 | M&L in replacement of PVC insulated service cable flat or round sheathed, aluminium, multistranded conductor 1100V grade size 16 Sq mm 2 core, complete all as specified and directed. |
| 41 | All as per item No 40 above but 10 Sq mm 2 core |
| 42 | Supply and fix in replacement junction box of size 200mmx150mmx100mm made out of FRP with double stud hinged door locking including electric connection for 3 phase out going cable and single phase connection for street light fitting incl controlled MCB SP-10Amps -01 Nos with suitable connector for looping duly sealed with rubber plugs enclosed in thermo plastic inclosed shock proof safe IP-65 weather vermin proof dust and water proof complete with cable entry incl glands of standard size with 2 Nos mild steel clamps to be fixed on pole complete all as specified and directed. |
| 43 | M&L for preparation of old painted for chain link/Barbed wire fencing/gate/angle iron/PCC post of sub station (outer exposed surface) painting starts from above ground level including MS channel / angle iron and GI bracket/clamps with bolts, nuts and applying two coat of aluminium paint / snowcem including writing substation details with black colur of existing size letters complete all as specified and directed. |
| 44 | Supply ,intallation and commisoning of free standing floor mounted,dust and vermin proof automatic timer switch box panel board ,outdoor type,fabricated with 3.15 mm thick CRCA MS sheet for load bearing members and 2 mm thick for doors and covers and shall be painted with epoxy powder paint by means of electro static gun after rigorous pre treatment comprising o cold phosphating process on all internal and external surfaces after due preparation of surfaces.Panel should be front openable with double stud hinged door and locking arrangement and provided with suitable size of TPN bus bars of high conductivity copper alloy and shall be provided with colour coded heat shrinkable sleeves .The panel shall be fixed with angle iron frame made of angkes of size 50x50x6mm,embeded 200 mm below ground level in PCC 1:2:4 Type B-1 using 20mm grade stone aggregate ,600mm above ground level comprising the following-(a) ML-3 Contactor ,TP,40Amps,415Volts,50HZ-01 Nos(b) Digital timer switch 20 Amps capacity-01 Nos(c) MCCB,TP,63Amps,415vOLTS,50 Hz ,10KA breaking capacity-01 Nos[Incoming](d) MCB ,SP,32 Amps,240 Volts,50 Hz,10kA-03 Nos |
| 45 | Supply and fixing of post top 40W LED, 5700K New generation energy saving & environmental friendly, long life versatile aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs light source IP 66 complete all as specified and directed. |
| 46 | S&F in repalacement of street light bracket made out of 40 mm dia light grade GI pipe bend to shape 1.2 m long with 02 Nos clamp made out of 25 x 6mm GI strip including drilling holes bending welding and made to clampes on building/concrete/Rail/Tubular pole, complete all as specified and directed. |
| 47 | Dismantling posts or struts (wood steel or RCC) any section including taking out embeded portion of concrete and making good disturbed in ground, complete all as specified and directed. |
| 48 | Dismantling old chain link/barbed fencing of any size or mesh |
| 49 | Supply and fixing chain link fencing 4mm dia galvanised steel wire 150x100mm mesh, made upto including wire mesh any size etc. including provision of binding wire including upper and lower iron angle frame to support the chain link complete all as specified and directed. |
| 50 | Dismantling concrete poles/steel tubular poles ,struts of any size complete all as specified and directed. |
| 51 | M&L for augering of holes in true horizontal position under road /pavement by means of mechanical rig after doing ultrasound technique to prevent any damage to existing cables/pipe lines coming in route 1.5 Mtr deep and not exceeding 15 Mtrs long including laying HDPE pipe of 150mm dia complete all as specified and directed. |
| 52 | M& L for Fabricate, supply and install cubicle type, CPRI approved LT panel board,outdoor type, totally enclosed,dust & vermin proof (protection class IP 65) front opening with self locking arrangment made out of MS angle iron frame work, MS flat iron and CRCA sheet of 3.15 mm thick as per IS 5039 duly painted with powder coated paint of approved shade. The panel shall be suitable for 415 volts,50 Hz, 3 phase 4 wire system and shall be complete with 1000 amp capacity copper bus bar, wiring the panel board with suitable size of PVC insulated, multi stranded copper cables and all connected acessories required for functioning of panel board such as thimbles,glands, bolts, nuts,washers etc including supply and fixing following acessories:- (Tower 1 ) INCOMING (a) MCCB 250 Amps, 4 pole,36 KA - 01 Nos.(b) Digital type volt meter - set 01(c) Digital type ammeter with suitable rating CTs conforms to relevent IS specification,- set 01(d) LED type indicator lamp set of red , yellow and blue - set 01OUT GOING(c) MCCB 125 Amps, 4 pole, 25 KA DPX3 160 cat No 420096 - 01 Nos.(b) MCCB 63 Amps, 4 pole,25 KA DPX3 250 cat No 420249 - 02 Nos. |
| 53 | M&L for earthing complete with GI earth plate electrode 60cmx60cmx6.3mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to and including galvanized iron strip 25x4 mm as earth lead by means of GI bolts, nuts, check nuts and washers earth pit surrounded by picked layer of coal dust and 15 mm thick mixture in equal ratio of magnesium sulphate & copper sulphate in all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel all as shown in electrical plate NO 5 of SSR Part I (1991) and connecting to earthing test point, including CI cover, frame and PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in earthing pit with CI cover and framing including necessary earth work etc, complete all as specified and directed.Note :- (i) PCC chamber shall be constructed at least one meter away from building shall be provided in slanting manner. (ii) PCC pit cover shall be precast of RCC 1:2:4 type B-I 80 mm thick reinforced with XPM weighting not less than 4 Kg (sqm in liew of CI) |
| 54 | S&F LED flood light fitting 150 watt 230V outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. |
| 55 | S&F LED flood light fitting 200 watt 230V outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. |
| 56 | S&F LED garden light fitting globe type suitable for mounting LED bulb upto 14W design available as per site,with all accessories internally prewired and including connecting up with twin core copper conductor cable complete all as specified and directed. Please Enable Macros to View BoQ information |
| 57 | S&F LED garden light fitting globe type suitable for mounting LED bulb upto 14W design available as per site,with all accessories internally prewired and including connecting up with twin core copper conductor cable complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender