Tender For Comprehensive Maintenance To Certain Md Accn, Messes, Billets, Cleaning/Repair Of Sewage Lines, Manholes, Septic Tanks, Soakage Wells And Other Allied Works At Af Stn Chandinagar Under Aor Of Ge (Af) Faridabad
Tender Value
45 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
9 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baghpat → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance To Certain Md Accn, Messes, Billets, Cleaning/Repair Of Sewage Lines, Manholes, Septic Tanks, Soakage Wells And Other Allied Works At Af Stn Chandinagar Under Aor Of Ge (Af) Faridabad
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats with shutter (without taking off shutter from the frame) n exc 1.5 Sqm each and removing from site complete all as specified and directed. |
| 2 | All as per item No 01 above but exc 1.5 sqm but n exc 4.0 sqm each. |
| 3 | Taking down shutter of any description n.exc 1 sqm each complete all as specified and directed. |
| 4 | All as per item No 03 above but exc 1.0 sqm but n exc 2.0 sqm each. |
| 5 | S&F for Pressed steel frames of size 105 x 60mm for doors , windows and ventilators etc, with one or more rebates including PCC 1:2:4 type B0 (12.5mm graded aggregate) filling in hollow frame section and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 6 | S&F for Pressed steel frames of size 125 x 60mm for doors , windows and ventilators etc, with one or more rebates including PCC 1:2:4 type B0 (12.5mm graded aggregate) filling in hollow frame section and necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 7 | S&F in opening complete solid PVC door frame of size 50mm x 47mm made out of 5mm one side prelaminated any colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 8 | S&F for 35mm thick 2nd class hardwood Plain, framed panelled shutters (any No of panels) with panels of timber flat on both side (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers fixed to chowkats complete all as specified and directed. |
| 9 | S&F for 30mm thick 2nd class hardwood for glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as per SSR-Part-I Section-8, Clause 8.24 (a) etc., complete all as specified and directed. |
| 10 | All as per item No 09 above but 25mm thick for window, ventilatators etc. |
| 11 | S&F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 12 | S&F for factory made solid panel PVC door shutter 30mm thick(Style) consisting of frame made out of M.S. tube for top & bottom rails. M>S frame shall be covered with heat moulded prelaminated decorative any colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside wqith solvent cement for stiles and prelaminated colour PVC sheet for top rail, Lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelaminated decorative colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement fixing in frame at site., complete all as specified and directed. |
| 13 | S&F Butt hinges 100 mm long aluminium alloy anodised and fixed complete all as specified and directed. |
| 14 | All as per item No 13 above but 75mm. |
| 15 | S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 16 | S&F 125mm aluminium extruded alloy handles fabricated type complete all as specified and directed. |
| 17 | All as per item No 16 above but 100mm. |
| 18 | S&F 100 mm alumunium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 19 | All as per item No 18 above but 125mm. |
| 20 | S&F 250 mm long aluminium alloy anodised, sliding door bolt with hasp ,staple(bolt type) and fixing clips of sheet cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed. complete all as specified and directed. |
| 21 | S&F for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 22 | Hacking out old broken glass panes (any thickness size quality or description ) from wooden frame fixed with oil putty or beads area not exc 0.5 Sqm each all directed |
| 23 | S&F 3mm thick sheet glass, ordinary quality and glazing fixed with beading complete all as specified and directed. |
| 24 | S&F 5.5 mm thick ordinary quality ordinary quality and glazing with oil putty in square exceeding 0.50 sqm in each panel complete all as specified and directed. |
| 25 | S&F for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 26 | All as per item No 25 above but fixed in repair. |
| 27 | S&F in repairs Harrison rails 20 mm dia mild steel chromium plated curtain rail fixing with brackets stops complete all as specified and directed. |
| 28 | S&F Aluminium extruded body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and directed. |
| 29 | S&F in repair Aluminium alloy body and tongue and roller plate floor door stopper of 150mm size fixed with steel screws complete all as specified and directed. |
| 30 | S&F 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 31 | M&L fixed in repair 12mm thick PVC prelaminated board, exterior grade , prelaminated both side with decorative choice lamination fixed to aluminium frame works and similar work complete all as specified and directed. |
| 32 | S&F in repair 18/19mm thick PVC prelaminated board, exterior grade , prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber with lipping complete all as specified and directed. |
| 33 | M&L for Complete removal of existing treatment from walls, fins, chajja etc shall include brooming down or steel wire brushing, scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots and removing debris/ malba to low lying area out side of MOD land and applying 3 to 5 mm thick a layer of Birla white wall care putty on scrapped/uneven surfaces to match with the existing surfaces before application of primer/distemper and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 34 | M&L for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying two coats of exterior acrylic emulsion water based (weather proof coat) paint on wall complete all as specified and directed. |
| 35 | M&L for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying one coat of oil bound distemper on wall complete all as specified and directed. |
| 36 | All as per item No 35 above but two coats of oil bound distemper on wall. |
| 37 | M&L for preparation of old treated plastered surfaces of ceiling by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying one coat of oil bound distemper on ceiling complete all as specified and directed. |
| 38 | M&L for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying one coat of cement base paint on wall complete all as specified and directed. |
| 39 | All as per item No 38 above but two coats of cement based paint on wall |
| 40 | M&L for preparation of old wooden surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed |
| 41 | M&L for preparation of old painted steel surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 42 | M&L for Brickwork with sub class \\"B\\" bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 incl demolition of brick work or stone masonry built in cement mortar including all quions, arches, pillars, etc. complete all as specified and directed. |
| 43 | Dismantling floor hearth or wall tilling including cement mortat bedding (but not backaing coat) removing serviceable tiles to store & rubbish off from the MOD land complete all as specified and directed. |
| 44 | M&L for Glazed ceramic coloured tiles in vertical surface 350x250mmx7mm/ 450X350X7mm/ 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cm 1:4 on brick or concrete surfaces of wall to receive vertical tiles complete all as specified and directed. |
| 45 | M&L for non skid coloured ceramic dark tiles of size 7-8 mm thick area of each tiles exceeding 0.11 Sqm bur not exc 0.18 Sqm (400x400mm) as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over and including 20 mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 46 | Demolition of PCC cement concrete above ground floor and paving n.exc 15 cm thick (below or above ground level) un reinforced complete all as specified and directed. |
| 47 | M&L PCC 1:4:8 type D-2 (40mm graded stone aggregate ) for sub base 75mm thick complete all as specified and directed. |
| 48 | M&L for vitrified Ceramic tiles 10mm thick Dark shade (Square/ rectangular) polished, area of each tiles n. exc 0.36 SQm (600x 600mm) in floors etc,, set and jointed in neat cement slurry and pointed in shite or coloured cement to match over and including 20 mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 49 | All as per serial item No 48 above but in vertical surface such as skirting, dado and risers including 10 mm thick rendering in cm 1:4 on brick or concrete surfaces of wall to receive vertical tiles. |
| 50 | Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removing to store complete all as specified and directed. |
| 51 | S&F for 15 mm bore steel water tubing galvanised 15mm bore, medium grade fixed to walls and ceiling or in floor complete all as specified and directed. |
| 52 | Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removing to store complete all as specified and directed. |
| 53 | S&F for 20mm bore steel water tubing galvanised, medium grade fixed to walls and ceiling or in floor complete all as specified and directed. |
| 54 | S&F for 15 mm bore concealed type chromium plated Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed. |
| 55 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 56 | S&F for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints, laid in trenches or in floors or fixed to wall complete all as specified and directed. |
| 57 | S&F for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints, laid in trenches or in floors or fixed to wall complete all as specified and directed. |
| 58 | S&F 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 59 | S&F in repair 15 mm bore chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 60 | S&F in repair 15 mm bore chromium plated Stop angle valves, cast copper alloy screwed pressure, with crutch of butterfly handle,long shank and cup, screwed both ends for iron pipe for unions and fixed complete all as specified and directed. |
| 61 | S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and directed. |
| 62 | S&F in polythene connection of low density polyethylene (LDPE) pipes of pressure rating 2.5 Kgf/Sqcm, 45cm long with and including two brass union couplings, heavy duty, suitable for 15mm bore pipe, one on each end for connecting polyethylene pipe to GI pipe and fixed complete all as specified and directed. |
| 63 | S&F in repair 600 mm x 450 mm polished sheet glass mirror of thickness 5 mm of selected quality glass with PVC moulding all around, mounted on 6 mm thick CWR plywood backing and fixed to wooden/rubber plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 64 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 65 | S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed. |
| 66 | S&F for mild steel work for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. complete all as specified and directed. |
| 67 | S&F Box type mild steel windows incl frame made of hollow sections 60X25X1.25 mm thick and 50X20X1.25 mm thick shutter with sash bars incl 150 mm size MS tower bolts 2 Nos each leaf , MS handle made of Z section 100 mm long 2 Nos each leaf , mild steel cleat 55x25X75 mm long one nos each leaf complete all as specified and directed. |
| 68 | S&F in repair Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, sheets etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete all as specified and directed. |
| 69 | M&L for preparation of new surfaces of wooden any description not other wise described over 10cm width or girth and applying two coat of synthetic enamel paint over coat of primer complete all as specified and directed. |
| 70 | M&L for preparation of new steel surfaces in any description not other wise described over 10cm width or girth and applying two coat of synthetic enamel paint in any colours over coat of red oxide zinc chrome primer complete all as specified and directed. |
| 71 | Dismantling of plain or corrugated steel sheeting, any type and any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 72 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed. |
| 73 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in ridge of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed. |
| 74 | S&F anodised aluminium door shutters, aluminium section weighting 0.55 Kg/ RM including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. |
| 75 | S&F for anodised aluminium window and ventilator shutters with aluminium grill, side hund type without sash bars aluminium section weighing 0.55Kg/RM including necessary hointing cleats, glazing clips, rubber packing anodised aluminium snap beading, screws anodised aluminium fitting such as peg stay 150mm long (01no) hinges type B21, 100mm long (02 Nos) suitable handle (01 No) complete all as specified and directed. |
| 76 | S&F for anodised aluminium partition fixed type/with out sash bars aluminium section weighing 0.55kg/RM incl necessary jointing cleats, glazing clips rubber packing anodised aluminium snap beading, screw etc complete all as specified and directed. |
| 77 | S&F anodised aluminium frame for doors, windows ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and directed. |
| 78 | S&F ordinary quality sheet glass 5 mm thick in panels of aluminium door and window etc fixed with aluminium clip and rubber beading all as specified n exc 0.5 sqm complete all as specified and directed. |
| 79 | S&Fsteel ventilator with top hung shutter including hinges,steel peg stay etc., complete all as specified and directed. |
| 80 | S&F in repairs continuous (piano) hinges mild steel bright finish or electrogalvanised 30mm flaps complete all as specified and directed. |
| 81 | S&F for double action floor spring hydraulically regulated made ou of minium 1.25mm thick aluminium allooy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of MS heavy duty and fixed complete all as specified and directed. |
| 82 | Taking down cement plaster on Brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 83 | M&L for rendering 10mm thick in CM 1:4 on concrete surfaces on roof finishing even and smooth without using extra cement and using water proofing compound complete all as specified and directed. Note :- WPC shall be measured & paid for separately. |
| 84 | Supply only water proofing compound complete all as specified and directed. |
| 85 | M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surfaces of walls, facia etc to be finished even and smooth (w/o using extra cement) complete all as specified and directed. |
| 86 | M&L for preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with chalk whitening preparatory to distempering on surfaces of walls. complete all as specified and directed. |
| 87 | Dismantling of stone slab and tiles of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar and removing rubbish off the premises complete all as specified and directed. |
| 88 | M&L for granite tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 20 mm thick bedding layer in CM 1:6 complete all as specified and directed. |
| 89 | M&L for granite stone tiles dado 20mm thick machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of mirror finish type including 15 mm thick screed in CM 1 :4 on brick or concrete surface complete all as specified and directed. |
| 90 | Dismantling water tanks and removing to store of capacity n exc 500 ltrs complete all as specified and directed. |
| 91 | S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks tipple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. complete all as specified and directed. |
| 92 | M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 93 | Taking down cement plaster on brick or stone walls including racking out joints,hacking for key scrubbing down with water etc complete all as specified and directed. |
| 94 | Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc complete all as specified and directed. |
| 95 | M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 96 | M&L for rendering in 15mm thick with CM (1:4) on concrete/brick surfaces finished even and smooth without extra cement mixed with WPC @ 3% by weight of Cement complete all as specified and directed.Note :- WPC will be Measured and paid separetely. |
| 97 | Dewatering and removal of sludge from the septic tank/soakge well/soackage sump by machnically (sewage tanker suction pipe) where ever required and dispose of the same in closed container out of MoD land complete all as specified and directed. |
| 98 | Excavation in trenches, n.exc 1.5m wide & n.exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc10 sq m on plan & n exc 1.5 m in depth & getting out in any type of soil complete all as specified and directed. |
| 99 | All as per item No 98 above but exc 1.50 m and n.exc 3.00 m . |
| 100 | Removing excavated material(Soil) exc 250 m but n exc 500 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 101 | Returning, filling in, including spreading, leveling, watering & well ramming in layer s not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 102 | M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate 40 mm thick finish by using extra cement as in flooring complete all as specified and directed. |
| 103 | Demolition of cement concrete of any description and in any position not otherwise specificially provided for complete all as specified and directed. |
| 104 | Demolition and breaking up drain pipes (SGSW, AC & RCC) of any description 150 mm bore pipe set in cement mortar complete all as specified and directed. |
| 105 | M&L for concrete bed to 150 mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in cement concrete (1:3:6) type C-2 complete all as specified and directed. |
| 106 | S&F salt galzed stone ware drain pipe 150 mm bore laid in trenches and jointed complete all as specified and directed. |
| 107 | M&L for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in foundation, filling and mass concrete directed and specified |
| 108 | Demolition and breaking up drain pipes (SGSW, AC & RCC) of any description 200 mm bore pipe set in cement mortar complete all as specified and directed. |
| 109 | M&L for Concrete bed to 200 mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in cement concrete (1:3:6) type C-2 complete all as specified and directed. |
| 110 | S&F salt galzed stone ware drain pipe 200 mm bore laid in trenches and jointed complete all as specified and directed. |
| 111 | Demolition and breaking up drain pipes (SGSW, AC & RCC) of any description 300 mm bore pipe set in cement mortar complete all as specified and directed. |
| 112 | M&L for 300 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 113 | M&L for concrete bedd to 300 mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in cement concrete (1:3:6) type C-2 complete all as specified and directed. |
| 114 | M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in coping/Benching incl necessary from work and finishing of exposed surface complete all as specified and directed. |
| 115 | Demolition of reinforced cement concrete of any descrption and in any position not otherwise specifically provided for complete all as specified and directed. |
| 116 | Providing precast cement concrete (1:2:4 type B-1 with using 20mm graded stone agg) as in landings, cover slabs (for manholes etc). Chulah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed. |
| 117 | M&L mild steel TMT bars 8 mm to 10 mm dia cut to length bent to shape required incl cracking bending spirally, hooking and binding with & incl MS wire 0.9 mm dia etc complete all as specified and directed. |
| 118 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 119 | S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 120 | M&L prepartion of new steel surfaces over 10 Cm width or girth and applying two coats of synthetic enamel paint over coat of red oxide zinc chrome primer complete all as specified and directed. |
| 121 | S&F in repair CI 100 mm dia 'S' traps complete all as specified and directed. |
| 122 | M&L for cutting to existing manholes for connecting new/old drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (Using 20mm graded stone agg) smooth finished, and reforming benching as required for 150mm dia pipe complete all as specified and directed. |
| 123 | Demolition and breaking up 100/110mm bore drain pipes (salt glazed ware,PVC, AC or reinforced pipes) set in cement mortar complete all as specified and directed. |
| 124 | S&F for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints, laid in trenches or in floors/wall complete all as specified and directed. |
| 125 | Dismantling of 100/75 mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 126 | S&F for 100 mm bore sand Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls/trench complete all as specified and directed. |
| 127 | S&F for 75mm bore sand Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and directed. |
| 128 | Cleaning of existing drain pipes 150mm internal dia at any depth by roding manually as reqd at site from manhole and well flushing after cleaning incl. getting out sludge if any and liquid materials from connecting manholes, deposited in lines, removing solids and sludge to any distance place out side defence land at own cost and cost of removal shall be included in this rate complete all as specified & directed. |
| 129 | All as per item No 128 above but 200mm dia. |
| 130 | M&L for coloured Chequered cement concrete tiles 300x300x25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over and including screed bed 20 mm thick in CM 1:6 complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender