Tender For Provn Of Toilet Block With Driver Rest Room Near Bldg No 229 Shed Of Aad And Replacement Of Old Vintage 4 Pole / 2 Pole Structures With Rmu At Adm Regt & Tsu Under Ge (I) Gos
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Jul 2026
1 days left
EMD
85500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Toilet Block With Driver Rest Room Near Bldg No 229 Shed Of Aad And Replacement Of Old Vintage 4 Pole / 2 Pole Structures With Rmu At Adm Regt & Tsu Under Ge (I) Gos
BOQ
| Sl. No. | Item Description |
| 1 | M & L clean dry river sand in trenches/ducts for cushioning to cable, complete all as specified. Note : Punned thick ness of sand shall be measured and paid. |
| 2 | M & L for Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for HT, 25 x 20 cm size complete all as specified and directed. |
| 3 | Supply,laying, testing and commissionnig of UG HT cables, 11000 volts grade, 3 core x 95 sqmm (Earthed), XLPE insulated and PVC sheathed, steel wire armoured, with multi stranded aluminum conductor, heavy duty conforming to latest relevant IS, cables laid in trenches/ducts/under plinth floors passing through pipes etc, fixed on wall complete all as specified and directed. |
| 4 | Supply and fix cable jointing kit for 11 kV grade cable for indoor termination, heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE (E) armoured, aluminium conductor cable of size 95 sq mm complete all as specified and as directed. |
| 5 | S & F cable jointing kit for 11KV grade cable for Straight through joint heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 50 to 95 sqmm. |
| 6 | M&L for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron strip of size 32 x 6 mm as earthing lead by mean of nut/bolt and washer of galvanized iron or steel drawn through 40 mm dia light grade GI pipe as shown in electrical plate no 3 of SSR part I of 2009 including necessary excavation and earth work GI pipe 20mm dia medium grade for watering PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to panel board/Gen Set as indicated including testing complete all as specified and as directed. Note for item No 6 :- Earth protection pipe & earthing strip upto and including 7.5 m length is deemed included in unit rate quoted by the contractor. |
| 7 | Supply, installation, testing and commissioning of Ring main unit of outdoor type floor mounted with cable trench beneath with one load breaker switch and three VCB SF6 filled of 11 KV ,630 Amp, 3 phase 3 wire 50 Hz complete with following specifications (a) Rated voltage Ur - 12 k V (b) Lifting lugs/ hinges to be provided on outer body for lifting of whole equipment (c) SF6 gas tank of stainless steel with thickness 2.5mm of grde 304 to meet the IEC requirement (d) Pretreatment and painting as per 7 tank process , dual coat on CRCA enclouser epoxy polyster hybrid resin based powder with shade RL 7032 (e) Rating sticker, Do's/Don't stickers to be provided (f) Temp rise limit as per IEC 62271-200 (g) Aluminium busbar of size 50x10mm for phase suitable for 630Amps (h) Cupper bus bar of size 30x3 mm for earth busbar (j) Rated short time withstand current 21 kA for 3 Sec Note:- Any specification not mentioned above but will be provided as per OEM specification |
| 8 | Supply, installation, testing and commissioning of Ring main unit of outdoor type floor mounted with cable trench beneath with one load breaker switch and two VCB SF6 filled of 11 KV ,630 Amp, 3 phase 3 wire 50 Hz complete with following specifications (a) Rated voltage Ur - 12 kV (b) Lifting lugs/ hinges to be provided on outer body for lifting of whole equipment (c) SF6 gas tank of stainless steel with thickness 2.5mm of grde 304 to meet the IEC requirement (d) Pretreatment and painting as per 7 tank process , dual coat on CRCA enclouser epoxy polyster hybrid resin based powder with shade RL 7032 (e) Rating sticker, Do's/Don't stickers to be provided (f) Temp rise limit as per IEC 62271-200 (g) Aluminium busbar of size 50x10mm for phase suitable for 630Amps (h) Cupper bus bar of size 30x3 mm for earth busbar (j) Rated short time withstand current 21 kA for 3 Sec Note:- Any specification not mentioned above but will be provided as per OEM specification NOTE: (i) job includes disconnecting the existing income and outgoing feeder from 2pole/ 4pole structure and connecting the same to newly installed RMU’s and testing complete.(ii) shutdown will be provided intermittently as per pre planned schedule only. |
| 9 | M&L for removing the exisitng two/four structre consisting of rail pole/ pcc pole, cross arms, GOD, horn gap fuses, insulators by breaking the PCC/ cutting the pole complete all as specified and directed.Note:- Contractor shall deposit the GOD, horngap fuse, insulators to MES store at his own cost. |
| 10 | Supply and fixing FRP fencing made up with using FRP rod 12 mm dia, channel size 50x24x4 mm box section 50x25 mm I Section 38x15x3 mm and square box section 50x50mm in post embedded in plain cement concrete (1:4:8) type D2 using 20 mm graded stone aggrerate (45x45x45cm) including necessary excavation and earthwork at 1.25 m C/C with height of fencing 2 m from GL including entracne gate of size 1mx2m of same material MS aldrop bolt 300mm long , 150 mm size pressed steel handles and 2 Nos tower bolts MS hinges as required etc complete all as specified and directed.Note :- Verticle posts and rail section shall be manufactured of fibre glass reinforcement min 45% and formulation of polystrbased thermoset resigns. |
| 11 | M & L for loose filling with aggregate of size 40 mm graded of 20 cm thickness around the sub station complete all as specified and as directed |
| 12 | Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed. |
| 13 | Excavation in trenches/over areas upto 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed. |
| 14 | Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed. |
| 15 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed. |
| 16 | Material & labour for hardcore of broken stone gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed. |
| 17 | Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed. |
| 18 | Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter |
| 19 | Use and waste of Form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces of concrete |
| 20 | M&L Form work to sides and soffits of beams lintels etc finished rough |
| 21 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick flat fair finished surfaces of concrete. |
| 22 | M&Lfor form work to the edge of concrete flat n. exc 200 mm thick . |
| 23 | Supply & fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 24 | Supply & fix mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required as in stirrups |
| 25 | M&L RCC M-25 design mix as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete |
| 26 | M & L RCC M-25 design mix as in Columns, pillars, struts, posts etc complete all as specified & directed. |
| 27 | M & L RCC M-25 design mix as in beams, lintels over 1.5 m span etc |
| 28 | M&L for RCC M 25 for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and inshelves and the like etc |
| 29 | Material & labour brick work with fly ash bricks in CM 1;6 brick straight or curved on plain exeeding 6m mean radius complete all as specified. |
| 30 | Material & labour for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 31 | Material & labour for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces,in CM(1:4) surface finished even and smooth without using extra cement but using water proofing compound @3% by weight of cement complete all as specified and directed. |
| 32 | Material & labour for 5 mm thick plaster in CM 1:3 on ceiling surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 33 | M&L cement concrete type D-2 1:4:8 using (40 mm graded crushed stone agg) 100mm thick as in flooring sub base finished even and fair complete all as specified and directed. |
| 34 | S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete, all as specified |
| 35 | M&L Non skid ceramic coloured tiles 7-8mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cement to match including 15 mm th screed ded in cm 1:6 |
| 36 | S&F Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed. |
| 37 | M&L 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in path /plinth protection , finish even & smooth without using extra cement all as specified and directed. |
| 38 | M&L for rendering 15mm thick surface as in roof with integral water proofing compound @3% by weight of cement in CM 1:4 complete all as specified and directed. |
| 39 | M&L for water proofing treatment to roof surface complete all as specified and directed by engr-in-charge laid with following course of description below: a) Apply evenly bituminous based primer conforming to IS 3384-1965 @0.30kg/sqm (b) APP modified bituminous membrane 3mm thick with non woven polyster core of weight not less than 3.2 to 3.5 kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm both in longitudinal & lateral direction shall be sealed/fused by flamed torch application as per manufacturers instructions. (c) Applying bituminous based aluminium paint @0.20 kgs/sqm in two coats over APP membrane. |
| 40 | S&F Powder coated Aluminium sliding glazed windows with three track and three shutter sliding with following specifications and making good the adjacent surfaces complete all as specified and directed.(a) Three way track for sliding shutters of Cross section 92.0 mm x29.50 mm x1.2 mm thick.(c) Sliding shutters frame of Cross section 41 mm x20 mm x1.2 mm thick(d) 5.5 mm thick plain glass of approved make(e) IDPE rubber gasket for fixing of glass.(f) Locking cleats per shutter-01 Nos.(g) Sliding rollers per shutter-01 Nos.(h) Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.56mm for shutters-01 Nos(i) Fixing screws for frame with wall per window-08 Nos |
| 41 | M& L preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface |
| 42 | S&F powder coated anodised aluminium Ventilators with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed. |
| 43 | S&F Powder coated Aluminium anodised glazed side hung door with following specifications and making good the adjacent surfaces complete all as specified and directed.(a) Cross section of chowkhat/frame 101.60mm x 44.45mm x 2mm thick. (b) Cross section of hanging and meeting style 83 mm x44 mm x2 mm thick(c) Top rail of cross section 114mm x 44mm x 2mm thick.(d) Bottom rail of cross section 114mm x 44mm x 2mm thick.(e) Locking (middle) rail of cross section 100mm x 44mm x 2mm thick.(f) 5mm thick tinted glass of approved make(g) Aluminium handle elsc type 02 Nos per shutter (inside)(h) Aluminium door stopper heavy duty 01 Nos per shutter (i) Aluminium tower bolt 200mm long 01 Nos per shutter (inside) (j) Mortice brass lock 01 Nos per shutter with key superior quality as spd by engr-in-charge. |
| 44 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthstuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed tothe stiles & rails with suitable PVC sheet beading, and joined together with solventcement, suppling & fixing in the frame at site as per specification & drawing. |
| 45 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified & directed. |
| 46 | Supply & fix 150mm size aluminium alloy handles cast type anodized fixed with ss screw complete all as specified. |
| 47 | S&F aluminium anodised tower bolts 150mm long, of extruded section. fixed with ss screw complete all as specified. |
| 48 | S&F stainless steel heavy weight butt hinges 100mm in size complete all as specified and directed. |
| 49 | M&L three coats of white washing on new plastered surfaces including preparation of surface complete all as specified. |
| 50 | M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed |
| 51 | Supplying and laying of CPVC 25 mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified |
| 52 | Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining ein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc |
| 53 | Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified |
| 54 | S&F triple layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes complete all as specified. |
| 55 | S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete. |
| 56 | S&F in repair cromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified |
| 57 | S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with fancy type screwed both ends for iron or for union. |
| 58 | S&F in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified. |
| 59 | S&F factory made 600 x 450 mm beveled edge mirror 5.5mm thick of selected quality glass and fixed to wooden plugs with chromium plated brass screws and cup washers (In repairs) |
| 60 | S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed. |
| 61 | S&F in repair Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 62 | S&f in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 63 | Supply and fixing PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed |
| 64 | S&F in repair 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed. |
| 65 | S&F in repair ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement. |
| 66 | S&F in repair ,PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement. |
| 67 | Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. |
| 68 | S&F in repair CP brass soap dish complete all as specified |
| 69 | S &F Grating doom 100mm dia of PTMT (Minimum weight 25gms) |
| 70 | Supply and fix in repairs 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste complete all as specified & directed. |
| 71 | Supply and fix in repairs 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes complete all as specified & directed. |
| 72 | Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed. |
| 73 | Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed. |
| 74 | S&F 110mm PVC (SWR) vent cowl all as specified |
| 75 | S&F 110 PVC (SWR) junction single, (Single T) equal or unequal all as specified |
| 76 | S&F 110mm PVC (SWR) 'S' trap all as specified |
| 77 | S & F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof. |
| 78 | S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.) |
| 79 | S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia.) |
| 80 | S&FVitreous China Urinal, Half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automaticflushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 81 | S&F 15mm dia Push tap any colour ,suitable for urinals high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-50gms) |
| 82 | S&F 32mm dia Waste coupling of PTMT suitable for urinals (half or full threaded) |
| 83 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 84 | M&L for moorum/red bajri filing in floors or pavings laid in layers n exc 15cm thick spread levelled and rammed incl watering etc all as specified and directed. |
| 85 | M&L Soakage wells 1.2m x 1.5m effective depth, excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size |
| 86 | M & L for precast RCC 1:2:4 type B-1(using 20mm graded stone aggregate)for manhole cover including placing and set and providing necessary arrangement for handles in CM 1:4 all as specified |
| 87 | M&L 150mm dia Salt - glazed stoneware drain pipes laid in trenches and jointed as specified internal diiameter of pipe 150mm including demolition, removal from site upto 3.0 Km as directed by engg in charge and breaking up drain pipe ( salt glazed stone ware) complete all as specified and directed. |
| 88 | M&L Concrete bed to drain pipes 150mm, including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC(1:4:8) Type D-2. |
| 89 | M&L Concrete bed to drain pipes 150mm, including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC(1:4:8) Type D-2. |
| 90 | Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed |
| 91 | M&L for point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conf to IS-694/1990 unsheathed, multistranded, single core, copper cable 1100 volts grade cables drawn through PVC Conduit 20/25 mm dia medium grade(MMS) at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. flush mounting modular MS box made out of 1.60mm thick suitable for modular top cover and frame for fixing of modular switches,sockets,fan regulators, blank plate etc and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directed for the following:- (a) One light point controlled by one 10amps switch, one way |
| 92 | (b) One exhaust fan point controlled by one switch 10 amps,one way |
| 93 | (c) One fan point controlled by one switch 10 amps, and one regulator. |
| 94 | (d) One 5 pin 6 amps socket point controlled by one 10 amps switch on independent board . |
| 95 | (e) One 5 pin 10 amps socket point controlled by one 10 amps switch on same board . |
| 96 | All as per item No.94 & 95 above,but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for the following:- (a) One 6 pin 16/20amps socket outlet point controlled by one 16/20 amps switch on independent board. |
| 97 | (b) One 6 pin 16/20 amps socket outlet point controlled by one 16/20 amps switch on same board. |
| 98 | All as per item No.94 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed. |
| 99 | Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, with ISI Marked complete all as specified and directed. |
| 100 | Supply & fixing modular type switch 16/20 Amps, single pole,1way,1 module,240V,with ISI Marked complete all as specified and directed. |
| 101 | Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed. |
| 102 | Supply & fixing modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed |
| 103 | Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate for batten fittings/bulbs complete all as specified and directed. |
| 104 | Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed |
| 105 | Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system |
| 106 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 107 | S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. |
| 108 | Supply and fix LED secruity light fitting of capacity 35 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and complete all as specified and directed. |
| 109 | Supply and fix GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc complete all as specified and directed. |
| 110 | Supply & fix and sheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection complete all as specified and as directed. |
| 111 | Supply & fix MCB SP 6 to 32 Amps 10 KA,\\"C\\" series,AC,240Volts,50Hz , ISI marked complete all as specified and directed. |
| 112 | Supply & fix and MCB SPN 32 to 40 Amps 10 KA,\\"C\\" series,AC,240Volts,50Hz, ISI marked complete all as specified and directed. |
| 113 | Supply & fix and MCB TPN 63 Amps 10 KA,\\"C\\" series,AC,415Volts,50Hz, ISI marked complete all as specified and directed. |
| 114 | Supply and fix suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts,50Hz suitable for AC's/Geysers complete all as specified and directed. |
| 115 | Supply and fixing ceiling fans complete with blades, down rods, and connected accessories, 230 V, 1400mm sweep, Min air delivery 225 CFM with squarrel cage inductio motor complete all as specified and directed. |
| 116 | Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 300 mm sweep with blades and including providing insect protection net frame , with louvers and frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed. |
| 117 | Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC/(PVC hevy duty cover) cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed. |
| 118 | Supply and fixing of metal flush box 1/2 module, ISI marked,and suitable for existing type as per site requirement complete all as specified and as directed. |
| 119 | Supply and fixing of metal/PVC flush box 3 module ,ISI marked, and suitable for existing type as per site requirement complete all as specified and as directed. |
| 120 | Supply and fixing of metal/PVC flush box 4/5 module, ISI marked,and suitable for existing type as per site requirement complete all as specified and as directed. |
| 121 | Supply and fixing of metal/PVC flush box 6 module,1.60mm thikness ,ISI marked and suitable for existing type as per site requirement complete all as specified and as directed. |
| 122 | Supply and fixing of metal/PVC flush box 8 module,1.60mm thikness ,ISI marked and suitable for existing type as per site requirement complete all as specified and as directed. |
| 123 | Supply and fix modular white cover plate with frame 1 module suitable for GI flush box,ISI marked and suitable for site requirement for above point wiring and incl screws,washears etc complete all as specified and as directed. |
| 124 | Supply and fix modular white cover plate with frame 2 module suitable for GI flush box,ISI marked and suitable for site requirement for above point wiring and incl screws,washears etc complete all as specified and as directed. |
| 125 | Supply and fix modular white cover plate with frame 3 module suitable for GI flush box,ISI marked and suitable for site requirement for above point wiring and incl screws,washears etc complete all as specified and as directed. |
| 126 | Supply and fix modular white cover plate with frame 4 module suitable for GI flush box,ISI marked and suitable for site requirement for above point wiring and incl screws,washears etc complete all as specified and as directed. |
| 127 | Supply and fix modular white cover plate with frame 6 module suitable for GI flush box,ISI marked and suitable for site requirement for above point wiring and incl screws,washears etc complete all as specified and as directed. |
| 128 | Supply and fix modular white cover plate with frame 8 module suitable for GI flush box,ISI marked and suitable for site requirement for above point wiring and incl screws,washears etc complete all as specified and as directed. |
| 129 | Supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 16 sqmm,4 core complete all as specified and directed. |
| 130 | Boaring holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed. |
| 131 | Material & labour for GI pipe 50 mm \\"light grade\\" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed. |
| 132 | Material and labour for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.ISI Marked IS-15801 lying in trenches/wallc/ceilings or in floors and necessary clamps, saddles etc complete of size outer dia 25 mm complete all as specified and directed. |
| 133 | Supply and fixing PPR gate valve(Brass insert) of dia 25 mm fixing at near to building on wall upto one meter height complete all as spfd and directed. |
| 134 | Making connections of PPR pipes distribution branches with PPR main of following sizes of 50 to75 mm by providing and fixing tee including cutting and making fusion joint etc |
| 135 | M&L for Road boaring/cutting holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed. |
| 136 | Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making good cutting portion coping of pole and filling of foundation etc including necessary use and waste of form work complete all as specified and directed.Note:- Top surface of pole coping to making smooth finishing and white washing made by the contractor cost deemed into quoted rete only. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender