Tender For Repair/Replacement Of Flooring, False Ceiling Wks/Wall Panelling/Ot Door Repair Works, Rendering And Connected Works At Wards And Ancilliaries And Echs Under Age B/R-Iii At Ge (South) Pune.
Tender Value
48.99 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
19 days left
EMD
97980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Flooring, False Ceiling Wks/Wall Panelling/Ot Door Repair Works, Rendering And Connected Works At Wards And Ancilliaries And Echs Under Age B/R-Iii At Ge (South) Pune.
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repair following accessories of Auto sliding doors of OT in New Command hospital for efficient and effective performance of the doors complete all as specified and directed by Engr-in charge and as per manufacture instruction. |
| 2 | SDA04 DC Controll Card |
| 3 | DC Motor: |
| 4 | Motor Pulley: |
| 5 | Battery: 24V |
| 6 | Adaptor for DCB controller: |
| 7 | Teeth belt: |
| 8 | Foot sensor: IR based sensor for Sliding of Door |
| 9 | S&F in repair following accessories of Swing doors of OT in New Command hospital for efficient and effective performance of the doors complete all as specified and directed by Engr-in charge and as per manufacture instruction. |
| 10 | Door closer : Automatic door closer with soft closing, rated for 65kgs |
| 11 | Hinges : SS 304 construction, size: 4 Inch x 3 Inch |
| 12 | Tower Bolt : Concealed Tower Bolt, SS 304 Construction |
| 13 | Door Handle : SS 304 Construction, length 250mm x 22mm Dia |
| 14 | Drop seal : Automatic drop seal, Size as per length of door |
| 15 | Gaskets : Rubber Gaskets for an airtight seal. |
| 16 | View panel : size 400mm x 600mm, 5mm Glass on both side with vaccum chamber, |
| 17 | Door lock: Concealed door lock, SS 304 finish, |
| 18 | S&F in repair following accessories of Pass Box of OT in New Command hospital for efficient and effective performance complete all as specified and directed by Engr-in charge and as per manufacture instruction |
| 19 | UV C light & choke : Germicidal UVC tube light, Power : 12 Watts, |
| 20 | Pass Box Door switch: electronic switch with interlocking to prevent cross contamination, |
| 21 | S&F in repair following accessories of Two way scrub of OT in New Command hospital for efficient and effective performance complete all as specified and directed by Engr-in charge and as per manufacture instruction |
| 22 | Sensor: IR based sensor for handsfree tap activation, |
| 23 | Foot paddle: SS 304 construction, manual activation of tap |
| 24 | Soap dispenser: Manual Soap Dispenser, SS 304 construction, |
| 25 | Auto SS304 tap: SS 304 Finish, Automatic Tap, |
| 26 | Tap valve: Valve to control flow of water, |
| 27 | SMPS for Scrub: Power Supply circuit for Sensor, |
| 28 | S&F in repair following accessories of Aluminium vaniation blinds OT in New Command hospital for efficient and effective performance complete all as specified and directed by Engr-in charge and as per manufacture instruction |
| 29 | Motor: DC motor with power supply, |
| 30 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for and removal of material out side MD land all as specified and as directed. |
| 31 | M&L for PCC type B-0 1:2:4 ( 12.50mm graded agg) as in levelling course complete all as specified and as directed. |
| 32 | M & L Machine cut cuddapa stone slabs one side polished 30 to 40 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 20mm screed bed in cement mortar (1:6) complete incl demolition of old stone slabs all as speicified and directed. |
| 33 | M&L for 16 -18 mm thick Granite slab (of any type/colour) work (table rubbed and polished) in steps, window cills. cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. as counters of any radius etc laid over 20 mm thick screed bed in CM ( 1:4) including demolition of existing stone slab of any description all as specified and directed. |
| 34 | Renewing glazed tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specifed and directed. |
| 35 | Material only coloured Glazed ceramic tiles in vertical surface 300x200x 7 mm thick all as specified and directed. |
| 36 | M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:3:6) 20mm gde aggregate and setting in CM 1:6 incl taking down old unserviceable brick work complete all as specified and as directed |
| 37 | M&L for Rendering10 mm thk in cm 1:4 on Brick/Block masonry surfaces as in walls finished even and smooth without using extra cement incl two coats of plastic emulsion paint over a coat of primer etc complete all as specified and directed. |
| 38 | M&L for Rendering15 mm thk in cm 1:6 on Brick/Block masonry surfaces as in walls finished even and smooth without using extra cement etc complete all as specified and directed. |
| 39 | M&L for Rendering10 mm thk in cm 1:4 on Brick/Block masonry surfaces as in walls finished even and smooth without using extra cement incl two coats of plastic emulsion paint over a coat of primer incl taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 40 | M&L for Rendering15 mm thk in cm 1:6 on Brick/Block masonry surfacesas in walls finished even and smooth without using extra cement incl two coats of weather proof exterior emulsion paint over a coat of primer incl taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 41 | M&L for Rendering15 mm thk in cm 1:6 on Brick/Block masonry surfaces as in walls finished even and smooth without using extra cement incl two coats of cement base paint incl taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 42 | S&F in repairs 32mm bore, 750mm long PVC waste pipe suitable for WHB complete all as specified and direcetd. |
| 43 | S&F in repairs 40 mm bore and 75 cm long PVC waste pipe suitable for sink complete all as specified and directed. |
| 44 | S&F in repairs vitreous china ceremic white single piece WC (S or P trap with UF soft close seat cover , hinges, accessorires set, size 365x655x765 mm, product Code : LYS-WHT-38851SSM of Jaquar of equivalent make as mentioned here-in-after, complete all as specified and directed. |
| 45 | S&F vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair of size 580x440mm white with intergral footrest with 'P' or 'S' trap complete all as specified and directed. |
| 46 | S & F in repairs Urinal spreader of Brass any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as directed. |
| 47 | S&F in repairs looking mirror 600x450x5mm thick with aluminium channel frame, selected quality mounted on 6mm thick commercial plywood back and fixed with chromium plated brass screwes and cup washers etc. , complete all as speicified and directed. |
| 48 | S&F in repairs HDPE PVC lid (cover) suitable for 501 ltr to 1000 Ltrs capacity PVC water tanks, complete all as speicified and directed. |
| 49 | S&F in repairs 2mm thick PVC fibre mirror cabinet of size (450x325x120mm ) and fixed to wall after taking down old mirror, complete all as speicified and directed.Make- CERA or Equivalent |
| 50 | S&F in repairs CP Wall mixer 3-in-1 for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore of pipe complete all as specified and directed. |
| 51 | S & F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed |
| 52 | S & F in repairs 15 mm chromium plated 2 way bib cock fancy type with wall flange complete all as specified and directed. |
| 53 | S&F in repairs wash hand basin CP brass mixer suitable for mixing of hot & cold water as approved pattern, screwed down for 15mm dia iron pipe, complete all as speicified and directed by Engineer in charge. |
| 54 | S & F in repairs CP health faucet (ABS Body) with 1 mtr long flexible rod complete. |
| 55 | S&F in repairs mild steel chromium plated grating (round) 125 mm dia fixed over floor / nahani trap (with hole OR without hole), complete all as speicified and directed. |
| 56 | S&F in repairs CP towel rail 600 mm long 20mm dia fixed with plastic guities with steel screws etc., complete all as speicified and directed by Engineer in charge.. |
| 57 | S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws. |
| 58 | Supply and fix elbow operated pillar tap cast copper alloy, brass chromium plated, screw down, single leaver surgical purpose with extended operating lever of cat ID-FLR-5031N of jagur,cera,hindware or equivalent including taking down of old unserviceable pillar taps complete all as specified and directed. |
| 59 | S & F in repair angle cock, fancy type, 15mm bore brass chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge. |
| 60 | S & F Towel Ring with round flange (Medium) of Chrome Plated of Jaquar Model No ACN-CHR-1121BN mirrored finish fixed with and including brass screws and wooden/plastic cleats fixed in repairs. |
| 61 | S&F in repairs, stainless steel plate rack of size 36inch x 39 inch x 10inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. Make – Blue Star Silver Shine Cat No.KPR-315 or equivalent from Nirali / Jain Brothers Sanitation Pvt Ltd (Jayna) as approved. |
| 62 | S & F in repairs stainless steel kitchen sink without drainage board of 1 mm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets or fixed as in counter type in granite/ cudappa platform and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete. |
| 63 | Supply and fix in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, CP Brass waste coupling washers and waste pipe and fitting including bedding in cement mortar to dwarf wall or including fixing & providing cantilever brackets and connecting union to pipe, over all size of sink 1020 mm X 510 mm, bowl size 460 mm X 360 mm X 160 mm, complete all as speicified and directed. |
| 64 | S&F in repairs GI tubing tubes \\"medium grade\\" galvanized with all fittings and fixed complete to walls / concealed and ceiling or laid in floors in any position or location including taking down etc complete all as specifed and as directed for 15mm bore. |
| 65 | S&F in repairs GI tubing tubes \\"medium grade\\" galvanized with all fittings and fixed complete to walls / concealed and ceiling or laid in floors in any position or location including taking down etc complete all as specifed and as directed for 20mm bore. |
| 66 | S&F in repairs GI tubing tubes \\"medium grade\\" galvanized with all fittings and fixed complete to walls / concealed and ceiling or laid in floors in any position or location including taking down etc complete all as specifed and as directed for 50mm bore. |
| 67 | S&F in repairs GI tubing tubes \\"medium grade\\" galvanized with all fittings and fixed complete to walls / concealed and ceiling or laid in floors in any position or location including taking down etc complete all as specifed and as directed for 25mm bore. |
| 68 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades,shelves , lintels, etc.and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls. |
| 69 | S & F in repairs 05 Nos. and 04 Nos. brass spindle / brass face suitable for 15 mm wall mixer / WHB Mixer /Sink Mixer / CP pillar cock, complete all as specified and directed. |
| 70 | S&F in repairs 15mm bore bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 71 | S&F in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 72 | S&F in repairs PVC connection pipe 450mm long as suitable with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer, complete all as specified and directed. |
| 73 | S&F in repairs PVC connection pipe 600mm long as suitable with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer, complete all as specified and directed. |
| 74 | S&F in repairs stop cock ISI Marked cost copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified. |
| 75 | S&F in repairs stop valve cost copper alloy, chromium plated screw down high pressure with crutch handle screwed both ends suitable for iron pipe of 20mm bore, complete all as specified and directed. |
| 76 | S&F in repairs shower rose chromium plated brass fancy type 125x125 mm with or without swivel any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 77 | M&L for replacement of Kitchen Sink Tap of CERA 1015251 Victor (wall mounted) with long swivel spout and wall flange incl removal of old unserciceable tap all as specified and directed. |
| 78 | M&L for Cleaning of Facade of Glass and ACP upto height of 6th floor by chemical for cleaning of Glass and ACP including safety harness and suspended cradles/rope access complete all as specified and directed. |
| 79 | M&L for Kota polishing work in floor with grinding of floor followed by deep cleaning, filling any gaps with matching epoxy resin and buffing to remove scuffs and stains complete all as specified and directed. |
| 80 | S&F in replacement of LED lighting of 320X160mm for token display system incl SMPS for doctors OPD all as specified and directed. |
| 81 | S&F in repairs PTMT waste fitting 32mm bore suitable for WHB / sink complete all as specified and directed. |
| 82 | S&F in repairs waste coupling, brass chromium plated 32mm dia suitable for WHB, complete all as specified and directed. |
| 83 | S&F in repairs waste fitting (coupling) brass chromium plated 40 mm dia suitable for sink, complete all as specified and directed. |
| 84 | S&F in repairs 10 Itrs capacity PVC (White) valve less syphonic action type, flushing cistern, low level with inlet ball valve float, handle. aluminium brackets for bottom support fixing with gutties embeded in wall with drilling machine etc complete all as specified and directed. |
| 85 | S&F in repairs 1000 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked of make specified, three layered construction hoisted and fixed in position with and including tank nipple, PTMT ball valve, float with aluminium rod etc complete including taking down of existing unserviceable tank complete all as specified and directed. |
| 86 | All as per item no. but 2000 ltrs capacity water tank, complete all as specified and directed. |
| 87 | S&F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia, suitable for low level cistern including jointing to WC complete all as specified and directed. |
| 88 | Taking down chowkats or frames with shutters (without taking off shutters from frame) exc 1.50 Sqm but not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 89 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from frame) each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 90 | Taking down shutter of any description exc 1 Sq.m and n/exc 2 Sq.m each complete all as specified and as directed. |
| 91 | Taking down door shutter & refixing in same opening any description, easing and adjustment and also refixing builders hardware of size exc 1.0 sqm but not exc 2.0 sqm each complete all as specified and directed. |
| 92 | Easing and adjustment and also refixing builders hardware of size exc 1 sq. m and n exc 2 sq. m each without taking off shutters complete all as specified and directed. |
| 93 | S&F 12mm thick toughned glass frosted as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required all as specified and as directed. |
| 94 | S&F of SS top pivot glass patch fitting of size 1.5 mm and 150mm length for fixing of glass door all as specified and directed. |
| 95 | S&F of Stainless steel of H Type Handle 800mm length and 32mm dia for glass door all as specified and directed. |
| 96 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, all as per direction of Engineer in charge. |
| 97 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as per direction of Engineer in charge. |
| 98 | S&F powder coated aluminium frames (min thickness of powder coating 50 micron) work doors windows, ventilators, dome sections and partitions (fixed partitions with extruded built up standard tubelar sections/ appropriate Z sections and other sections of (dome) of approved make confirming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size, including necessary fillingups the gaps of junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. aluminium sections shall be smooth rust free, straight , metred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing , panelling,CP Brass / stainless steel screws,complete all as specified and directed by Engr-in Charge. |
| 99 | S&F powder coated aluminium (min thickness of powder coating 50 micron) work for shutters of doors windows, ventilators including providing and fixing hinges/pivots and making provision for fixing and fitting wherever required including the cost of EPDM rubber/neoprene gasket required(fitting shall be paid seperately) with extruded builtup standard tubelar sections/ appropriate Z sections and other sections of approved make confirming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size, including necessary fillingups the gaps of junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. aluminium sections shall be smooth rust free, straight , metred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing , panelling,CP Brass / stainless steel screws,complete all as specified and directed by Engr-in Charge. |
| 100 | M&L Anodised powder coated grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete incl dismantling of existing u/s grill and removal from the site as per requirement and direction of Engineerin-charge. |
| 101 | S&F of 30mm thick plywood with 0.90mm flush laminate finish on top door of size 0.79X2.06 including powder coated 200mm aluminum tower bolts 2 Nos, 100mm aluimimum hinges 3 Nos, 200mm Handles 2 Nos, 300mm aluminimum sliding door bolts 01 Nos Complete, incl taking down of old unsv door all as specified and directed. |
| 102 | S&F of 50mm thick plywood with 0.90mm flush laminate finish on top door size 1.01X2.06 including powder coated 200mm aluminum tower bolts 2 Nos, 100mm aluimimum hinges 3 Nos, 200mm Handles 2 Nos, 300mm aluminimum sliding door bolts 01 Nos Complete incl taking down of old unsv door all as specified and directed. |
| 103 | S&F 4.80 mm thick sheet glass ordinary quality fixed with alu glazing clips and gasket exc 0.5 sqm in each pane complete all as specified and directed. |
| 104 | S&F sheet glass 4.00 mm thick frosted ordinary quality and glazing with oil putty or glazing pins/spring clips with steel frams all as specified and directed |
| 105 | S&F figured or pin head glass type of 4mm thick and glazing with oil putty in squares n exc 0.5 sq. m in each pane as in louvers of ventilators complete all as specified and directed. |
| 106 | M&L for 12mm thick prelaminated particle board, exterior grade, prelaminated one side with both side decorative choice lamination & other side balancing white lamination, fixed with screws to aluminimum/timber frame work all as specified and directed. |
| 107 | S&F stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm all as specified and as directed. |
| 108 | S&F butt hinge, medium weight ,cold rolled mild steel 100mm long all as specified and as directed. |
| 109 | S&F Aluminium anodised barred tower bolt of extruded section 200 mm long and fixed all as specified and as directed. |
| 110 | S&F extruded aluminium alloy handle fabricated type anodised 150 mm longall as specified and as directed. |
| 111 | S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed. |
| 112 | S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 100mm long all as specified and as directed. |
| 113 | S&F Mortice lock, vertical type, size 100 mm 4 lever brass body all as specified and directed. |
| 114 | S&F in repairs aluminium (extruded section) body door closer hydraulically regulated, designation No 3,universal type,suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed. |
| 115 | M&L for 16 -18 mm thick Granite slab (of any type/colour) work (table rubbed and polished) in walls, skirtings and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc laid over 10 mm thick plastering in CM ( 1:3) including demolition of existing stone slab of any description all as specified and directed. |
| 116 | M&L 20-25 mm thick Machine cut kota stone slab flooring over 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete including demolition complete all as specified and directed by Engr-in charge. |
| 117 | M&L 12 to 15mm thick Kota stone slab in riser of steps, skirting, dado and pillar laid over 10mm thick in CM 1:3 laid over cement plaster and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing incl demolition complete all as specified and directed by Engr-in charge. |
| 118 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed |
| 119 | M&L for coloured glazed ceramic designed tiles in vertical surface 600x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over incl. 10 mm thick backing coat in CM 1:3 to maintaine true plumb incl dismantling floor, hearth or wall tiling including taking down backing coat, removing rubbish off the MOD land complete all as speicified and directed. |
| 120 | M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square / rectangular), area of each tiles of 300x300mm in floors etc including 20mm thick screed bed in CM 1:6, including dismantling floor, hearth, removing rubbish off the MOD land complete all as speicified and directed. complete all as speicified and directed. |
| 121 | M & L Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, of 600X1200mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20mm thick screed bed or bedding layer in cement mortar 1:6, incl dismantling old tiles and removing rubbish off the MOD land complete all as speicified and directed. |
| 122 | M & L Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, of 600X600mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20mm thick screed bed or bedding layer in cement mortar 1:6, incl dismantling old tiles and removing rubbish off the MOD land complete all as speicified and directed. |
| 123 | M & L 600x1200x10 mm thick vitrified tiles in skirting etc. set and jointed in neat cement slurry pointed in white or coloured cement to match laid over 10mm thick plaster in CM 1:3, incl dismantling old tiles and removing rubbish off the MOD land complete all as speicified and directed. |
| 124 | Providing and applying in repair non staining and non streaking sealant of Dow Corning ( 789 or 991 HP) & backing rod in joints of width 12 mm to 20 mm of ACP / Glass panel of vertical / horizontal positions making the joints leak proof complete at all heights, levels, and locations etc. including scaffolding etc complete as directed by the Engineer in charge. |
| 125 | S&F of Stainless steel Grab bar Rail (Model No EGR01, Make Euronics)(600mm) of 32mm dia with 600mm length all as specified and directed. |
| 126 | S&F of Stainless steel Grab bar Rail (Model No EGR01, Make Euronics)(450mm) of 32mm dia with 450mm length all as specified and directed. |
| 127 | S&F of Stainless steel Grab bar Rail (Model No EGR01, Make Euronics)(1200mm) of 32mm dia with 1200mm length all as specified and directed. |
| 128 | S&F of Stainless steel Swing Handicap Grab bar Rail (Model No EGRS02, Make Euronics) of 32mm dia all as specified and directed. |
| 129 | S&F of Stainless steel Disabled Grab bar Rail U Shape (Set of 2) (Model No EGRS03, Make Euronics) of 32mm dia all as specified and directed. |
| 130 | S&F of Stainless steel Disabled urinal safety steel grab bar Rail (Model No EGR5U, Make Euronics) of 32mm dia all as specified and directed. |
| 131 | S&F of Stainless steel Disabled grab bar (L Shape) Rail (Model No EGR04LN, Make Euronics) of 600X600mm 32mm dia all as specified and directed. |
| 132 | S&F of Stainless steel Towel rack 600mm, SS 304, chrome plated (Model No ACC06, Make Euronics) of all as specified and directed. |
| 133 | M&L for PVC coloured ceiling board for ceiling/wall, 600 x 600 x 5 mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light all as specified and directed. |
| 134 | M&L for rendering 10mm thick cement plaster 1:3 with integral water proofing compound on fair faces of brick work or concrete surfaces when the concrete is green including taking down all as specified and directed. |
| 135 | Supply only Integral waterproofing compound |
| 136 | M&L for applying evenly a coat of bitumen primer at the rate of 0.70kg per sq.m including cleaning surfaces all as specified and directed. |
| 137 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application including taking down old unsv membrane complete all as specified and directed. |
| 138 | M&L for cement concrete tiles 25cmx25cmx22mm thick with grey cement and pigment incl 20mm screed bed in CM 1:4 including taking down of old unserviceable tiles all as specified and directed. |
| 139 | M&L for applying two coats of solar reflective bitumastic aluminium paints on the top of membrane surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 140 | M&L for stainless steel (Grade 304) railing,corner guards made of angles, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts/screws etc., of required size, on junctions of Wall etc, with suitable arrangement complete all as specified & as directed. |
| 141 | S&F sheet glass 4 mm thick ordinary quality exc 0.50 Sqm in each pane frosted on one side and glazing with oil putty or glazing pins/spring clips with steel frames incl hackingout of existing broken glass all as specified and directed |
| 142 | M & L for complete removal old painted surface of any description over 10cm girth or width, not otherwise described on walls and applying two coat of plastic emulsion paint over a coat of primer all as directed. |
| 143 | M & L for prepartion of old plastered surfaces of walls and applying a coat of plastic emulsion paint all as directed. |
| 144 | Cleaning and removing all scale and dirt by brushing the Concrete surface incl lime wash etc, of 50000 Ltrs RCC Water tanks and from mouths of circulating pipes etc. at roof top of 6th floor all as specified and directed. |
| 145 | Cleaning and removing all scale and dirt by brushing the Concrete surface incl lime wash etc, of 30000 Ltrs RCC Water tanks and from mouths of circulating pipes etc. at roof top of 6th floor all as specified and directed. |
| 146 | M&L for preparation of surfaces and applying 2mm thick wall care putty on walls complete all as specified and directed. |
| 147 | S&Fixed in repair stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm all as specified and as directed. |
| 148 | S&F in repair aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed. |
| 149 | S&F in repairs Aluminium anodised barred tower bolt of extruded section 200 mm long and fixed all as specified and as directed. |
| 150 | S&F in repair extruded aluminium alloy handle fabricated type anodised 150 mm longall as specified and as directed. |
| 151 | S&F in repair extruded aluminium alloy Haps & Staples 75 mm with ms hinge pin incl bolt to hinge plate and fixed with screws all aspecified and directed. |
| 152 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed. (Make : Dorma, Johnson, Hardwin) |
| 153 | S&F in repair Floor door stopper of aluminium alloy body double tongue annodised with rubber shoe and fixed of size 140 mm all as specified and as directed. |
| 154 | S&F steel rolling shutters thickness of laths 1.25mm with out ball bearing , but gear operated type with bevel gear box and crank handle as specified including top cover, an choring rod ,hasp and staple and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box size 0.15x0.12 cm and crank handle complete all as spcified and directed. |
| 155 | S & Fixed Collapsible steel gates, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets, complete |
| 156 | S&F 0.90 mm thk Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instr all as specified and directed. |
| 157 | S&F GI framework for seamless ceiling comprising of GI Perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of45mm suspended from soffit atapprox 900mmcentre to centre with GI cleat and steel expansion fastners with and including ceiling section(not exc 1.2m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26mmeach with lips of 105mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long incl dismantling and removal of existing u/s ceiling and boards complete all as specified. |
| 158 | Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions all as specified and directed. |
| 159 | S&F 8mm thick Seamless calcium cilicate made out of 1800x1200mm size board of siliceous and calcareous material reinforced material with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having philips head with under head cutter at 200mm centre to centre including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seam less finish all as specified and directed. |
| 160 | M&L in repair of 12mm thick Perforated fiber board/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frameworkorwith staples on snap grid all as specified and directed. |
| 161 | M&L 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed. |
| 162 | Supply only 600x600mmx8mm thick Seamless calcium cilicate made out of 1800x1200mm size board of siliceous and calcareous material reinforced material with cellulose fibre complete all as specified and directed. |
| 163 | Dismantling of wrought or MS work of any description etc as directed. |
| 164 | S&F for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in post, main and cross beams, hip and jack rafters, purlins, where connected to common rafters and running rails and guides for sliding doors, fixed with angle clips or other connecting plates all as specified and directed. |
| 165 | Cast iron work grade FG 150 of articles exc 5 kg each unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles all as specified and directed. |
| 166 | Dismantling of plain or corrugated steel sheeting in roof covering complete all as specified and directed. |
| 167 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed. |
| 168 | S&F mild steel framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders: framed balusters, wall ways, railings, frame work of water tanks and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 169 | S&F of 3mm thick polycarbonate sheet including only rubber EPDM of section (Domeset) and fixing the sheet with self tapping screws and rubber washer in circular dome of building complete all as spd and as directed.(NOTE:- Unit rates for this item is deemed to be inclusive of working of dome at the height of bldg including necessary safety measures for work to be carried.) |
| 170 | Material and labour for GRC wall cladding tiles over backing coat 5 mm thick sika cream (grey) adhesive & jointed & pointed in white cement mix with colour to match the colour of tiles including dismantling tiles complete all as specified & as directed. |
| 171 | S&F in repair of horizontal Venetian Blinds of powder coated Aluminum strips or equivalent of approved shade including necessary accessories complete all as specified and as directed. |
| 172 | M & L 18/19 mm thick perlaminated particle board, exterior graded, prelaminated both side with decorative choice lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cabinets/ Pelmets including 6mm thick, 1st class HW (Teak wood) beading all around fixed in repair complete all as specified and directed. |
| 173 | M&L plain fillets 2nd class hardwood. square, rectangular or triangular in section, exc 3.0& n.exc 6.0 sqcm clean sawn, secured with nails or brads all as specified and directed. |
| 174 | S & F in repair Continuous (piano) hinges 30 mm width of flap,mild steel, bright finish or electrogalvanised all as specified and directed. |
| 175 | S&F in repair 100mm dia cupboard handles fixed with nuts screws and washer of brass polished complete all as specified and directed. |
| 176 | S & F in repair 100 mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw as per specified. |
| 177 | S&F in repair of 150mm Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed and directed. |
| 178 | M&L for 3mm thick Aluminium Composite Panel (ACP) exterior grade (skin thickness 0.25mm) including aluminium anodised frame work of AA 300/5000 series with one core of material of virgin LDPE and coating of kynar 500 resin based PVDF coating (mettallic colour) with joint filling silicon weather proofing any colour all as spd and as directed. |
| 179 | S&F of wall tiles on cladding of size 0.20X0.06x0.01m including 10mm thick plaster in CM 1:4 incl taking down of old unserviceable tiles complete all as specified and directed. |
| 180 | M&L for preparing new surfaces of steel over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamal (ordinary tint) over a coat of red oxide primer all as specified and as directed. |
| 181 | S&F in repair 25 micron solar control film reflective type at any height and position to glazing and windows (Gareware sun control or equivalent) complete all as specified and directed. |
| 182 | M&L for removal of Vinyl flooring in flooring incl supply and fixing of Vinyl flooring of 2.00 mm thick in OT floor incl all of all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender