Tender For Repairs To Flooring, Internal Water Supply, Joinery, Roof And Internal Electrification At Mes Complex And Temporary Buildings At installation Rajali Nas Arakkonam And Maintenance/ Repairs/ Overhauling Of Ceiling Fan, Exhaust Fan, Wall Moun
Tender Value
33.26 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
18 days left
EMD
66520
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranipet → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Flooring, Internal Water Supply, Joinery, Roof And Internal Electrification At Mes Complex And Temporary Buildings At installation Rajali Nas Arakkonam And Maintenance/ Repairs/ Overhauling Of Ceiling Fan, Exhaust Fan, Wall Mounted Fan, Air Circulator Including Water Heater And Allied Items At Temporary Buildings Etc. In Md & Otm Accn At installation Rajali Nas Arakkonam. (Tender Id No. 2026_Mes_ _1)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 2 | M&L for 25mm thick PCC 1:2:4 type B0 (12.5mm graded stone aggregate) as in levelling course over sub base complete all as specified and as directed. |
| 3 | Dismantling of wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises including removing of all the debris to a distance n exc 2 km out side the base at the disposal of the contractor complete all as specified and as directed. |
| 4 | M&L for glazed ceramic coloured tiles 350 x 250mm x7mm/450 X 350 X 7mm thick as in dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10mm thick plaster on fair faces of brick work/concrete in CM 1:4 to receive tiles as in dado complete all as specified and directed. |
| 5 | M&L Light Shade Vitrified ceramic tiles10 mm thick (square/rectangular)polished area of each tile not exc. 0.36 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick Screed bed with CM 1:6 complete all as specified and directed |
| 6 | All as per Item no.5 but in vertical surfaces such as skirtings, dados etc.,including rendering10mm thick plaster on fair faces of brick work/concrete in CM 1:4 to receive tiles as in Skirting |
| 7 | S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 18 sqm but not exceeding 0.38 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed. |
| 8 | S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 18 sqm but not exceeding 0.38 sqm, in Skirting, etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including rendering 10mm thick of cement mortar 1:4 complete all as specified and directed. |
| 9 | M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed with CM 1:6 ccomplete all as specified and directed. |
| 10 | M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed with CM 1:6 complete all as specified and directed. |
| 11 | Demolition of stone slabs and tiles of any description or any thickness in floors, skirtings, risers etc laid ,bedded and pointed in any mortar complete all as specified and directed. |
| 12 | M & L for Machine cut kota stone slab flooring 20-25mm thick over 20mm cement screed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbingand polishing complete all as specified and as directed |
| 13 | M & L for Machine cut kota stone slab 20-25mm thick in skirting over 15mm cement screed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbingand polishing complete all as specified and as directed |
| 14 | M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry in floors and pointed with white cement with admixture of pigment to match the shade of granite stone laid & jointed over and including 20mm cement screed in CM 1:6 complete all as specified and as directed |
| 15 | M & L 20mm thick Granite (of any type) work (table rubbed and polished) in Skirting/Dado for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 16 | Providing edge moulding/ Full nosing to 18-20mm thick Granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed. |
| 17 | M & L for treating the surface with beeswax polish on marble/ granite/Kota stone/ stone work where ever required complete all as specified and as directed. |
| 18 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets . complete all as specified and as directed |
| 19 | Supply and fixing Gypsum board 12mm thick in ceiling fixed as per manufacturer instruction including anodised aluminium snap grid framework for false ceiling, with the help of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long finished with two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 20 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including hangers and hanging arrangements, including providing and fixing 12 mm thick gypsom ceiling board , fixed to the ceiling section withincluding finishing the joint of face board and applying two coats of plastic emulsion over one coat of primer complete all as specified and as directed |
| 21 | Taking down chowkats or frames exc 1.5 sqm but n. exc 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and as directed |
| 22 | Taking down chowkat or frame with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and as directed. |
| 23 | Taking down shutters of any description exc 1 Sqm & n.exc.2 Sqm each complete all as specified and as directed. |
| 24 | S&F second class hard wood plain , solid , straight , chowkats and frames wrought , framed rebated on the soilid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed |
| 25 | S&F for 35mm thick Plain, framed, panelled shutters of 2nd class hard wood (two panel), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered perticle board with commercial veneering on both faces, the size of rail and style as per IS : 1003 (part-I), kiln seasoned chemically pressure treated complete all as specified and as directed |
| 26 | Supply & fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm, wood grain printed PVC sheet used instead of Plain colour PVC sheet & edge reinforced with M.S. Square tube will be painted to match with printed sheet complete all as specified and as directed. |
| 27 | Supply & Fix Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face as per specification complete all as specified and as directed. |
| 28 | S&F 100 mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed. |
| 29 | S&F 75 mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed. |
| 30 | S & F Aluminium anodised barrel tower bolt all as above but 150mm long complete all as specified and as directed. |
| 31 | S & F Aluminium anodised barrel tower bolt all as above but 125mm long complete all as specified and as directed. |
| 32 | S&F extruded aluminium alloy handles fabricated types, anodised, each 150mm long complete all as specified and as directed |
| 33 | S&F extruded aluminium alloy handles fabricated types, anodised, each 125mm long complete all as specified and as directed. |
| 34 | S&F 300mm long Aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded section complete all as specified and as directed. |
| 35 | S&F in repairs Door closer hydraulically of (extruded section body) regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed |
| 36 | S & F of powder coated (minimum thickness coating 50 micron) Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed |
| 37 | S & F of Powder coated (minimum thickness coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 38 | S&F powder coated anodised aluminium alloy sections 3 tier track sliding windows series B weight of section frame 1.248 kg/m and shutter section weight 0.547 kg/m Jindal or equivalent duly fitted with neoprene beading, glazing clips, tinted glass panes 4.80/5.0 mm nominal thickness,aluminium wire cloth 0.45 mm dia and average width of aperture 1.4 mm, aluminium alloy handles ,aluminium powder coated any colour deco grill 8 mm dia(75x75mm) etc including make good jambs and cills complete all as specified and directed by Enginner-in-ChargeNote : rate shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle, 8mm dia aluminium powder coated colour deco grill etc |
| 39 | S&F powder coated anodised aluminium ventilator with fixed aluminium frame of size 65 x 40 x 1.98 mm thick or equivalent section fixed in vertical position with aluminium vertical members and half portion to be provided with 4 mm thick pinhead glass and remaining portion to be louvered using 4 mm thick pinhead glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and directed by Enginner-in-ChargeNote : rates shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading etc |
| 40 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed |
| 41 | S & F 4mm thick sheet glass, ordinary quality, in squares n.exc 0.5 sq.m each pane complete all as specified and as directed. |
| 42 | S & F 4.80mm thick sheet glass, ordinary quality, in squares n.exc 0.5 sq.m each pane complete all as specified and as directed. |
| 43 | S&F of 18/19 mm thick prelaminated particle board , interior grade, prelaminated one side with decorative choice lamination and otehr side balancing wihte lamination, fixed with screws to timber frame work as in cup board shelves complete all as specified and as directed. |
| 44 | S & F of 12mm thick Toughned glass as in partitions,hinged doors, automatic doors and similar work including cutting to shape, drilling holes required including Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed. |
| 45 | S & F of 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including necessary fittings(Double floor spring,corner lock Patches, Top and bottom patches, top pivots, 450mm long H type handles) and Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed |
| 46 | M & L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed |
| 47 | S & F of Corner lock patches with EPC and trike plate for glass door complete all as specified and as directed |
| 48 | S & F of 450mm long H-Type handles 25mm dia of grade SS 304, complete all as specified and as directed. |
| 49 | S & F of Top patches for glass door complete all as specified and as directed |
| 50 | S&F of brass 4- levers Mortice lock, vertical type, size 100 mm complete all as specified and as directed. |
| 51 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed |
| 52 | S & F in repairs Aluminium XPM alloy wire cloth, average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed. |
| 53 | S & F of 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed complete all as specified and as directed. |
| 54 | S & F of 12mm thick Decorative wall panels louvers and width 150mm fixed to plywood complete all as all as specified and as directed. |
| 55 | M & L for ATT in voids of masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed |
| 56 | M & L Preparation of old painted Steel surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying One coats of Synthetic Enamel paint complete all as specified and as directed |
| 57 | Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of wood of any description over 10 cm in width or girth not other wise described complete all as specified and directed. |
| 58 | M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed |
| 59 | M & L Preparation of old decorated/ plastered or unplastered wall surfaces and applying one coat of distemper oil emulsion complete all as specified and directed. |
| 60 | M & L for Complete Removal of existing treatment on wall by vacuumbased sanding machine removal of nails etc & filling cracks and applying two coats of oil bond distemper over one coat of alkali resistant primer and 1 mm putty by using mechanicall tool/ auto roller complete all as specified and directed |
| 61 | Material & Labour complete removal & prepartion of existing treatment and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) by using smart paint technique complete all as specified and as directed. |
| 62 | Taking up or down steel tubing 20mm dia bore and connection complete all as specified and as directed. |
| 63 | Taking up or down steel tubing 25mm dia bore and connection complete all as specified and as directed. |
| 64 | Supplying and laying in repairs of CPVC pipes of outer dia of pipe 20mm SDR 11.00 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed |
| 65 | Supplying and laying in repairs of CPVC pipes of outer dia of pipe 25mm SDR 11.00 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed |
| 66 | Taking down eave gutter, rain water pipe and sewage pipe of any size of pattern including all fittings, heads, shoes, bends etc complete all as specified and as directed |
| 67 | M & L for 1mm thick Mild steel sheet eaves gutters of dia 150mm, galvanised class 3, half round with rounded edges including necessary outlets, drop end and stop end complete all as speified and as directed |
| 68 | M & L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as speified and as directed |
| 69 | S&F for 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as speified and as directed |
| 70 | S&F for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 71 | S&F for 75mm dia bore PVC (SWR) bends any radius complete all as specified and as directed |
| 72 | S&F for 110mm dia bore PVC (SWR) bends any radius complete all as specified and as directed |
| 73 | S & F in repairs of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed. |
| 74 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding , low level flushing cistern and Flush pipe of 32mm dia but including seat cover) complete all as specified and as directed. |
| 75 | S&F in repairs PVC valve less flushing cistern low level 10 litres capacity with syphonic action type with inlet ball valves, float and handle and connections to pipes and fixing of chain and pull (or) lever including brackets and 32mm dia PVC flush pipe of 60cm long complete all as specified and as directed. |
| 76 | S&F in repair vitreous china, wash hand basin white flat back size 550 x 400 mm white complete waste, chain and pug and precelain stopper including bracket complete all as specified and as directed.. |
| 77 | S&F in repair of Vitreous China half stall urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed |
| 78 | Supply & fixing in repairs fancy type pillar tap 15mm dia, cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly nut screwed for iron pipe complete all as specified and as directed. |
| 79 | Supply & fixing only 32mm waste fittings brass of chromium plated for wash basin etc, with long screwed shanks and fly nut, flange end bedded in red lead cement and others and complete all as specified and as directed. |
| 80 | S&F in repair bib taps concealed type with long shank and cup of fancy type,chromium plated screwed down high pressure with crutch or butterfly handle screwed for iron pipes of 15mm bore complete all as specified and as directed.. |
| 81 | S & F in repairs 125 mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 82 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed |
| 83 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 84 | S & F in repairs flexible PVC waste pipe 32/40mm suitable for wash hand basin and Kitchen Sink complete all as specified and directed |
| 85 | S & F PVC (SWR) multiple Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 86 | S&F in repair Angle valves fancy type,chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore complete all as specified and as directed.. |
| 87 | S&F in repair 600 mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.. |
| 88 | S & F in repairs Gun metal 25 mm dia of pipe globe or gate valve with Iron wheel head, screwed both end for Iron pipe one fixed complete all as specified and as directed. |
| 89 | S & F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed |
| 90 | S&Fin repairs plastic water closet seat cover, black,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device as in repairs complete all as specified and directed |
| 91 | S&F Stainless Steel pipe 25mm dia curtain Rod for windows, doors Opening etc complete all as specified and as directed. |
| 92 | S & F Stainless steel Curtain Bracket ( L type) for fixing curtain rod complete all as specified and as directed. |
| 93 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc of tank capacity exceeding 250 litres and not exceeding 500 litres complete all as specified and as directed. |
| 94 | S&F in repairs of PVC water tank 500 lit capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling the same complete all as specified and as directed. |
| 95 | S&F in repairs of PVC water tank 1000 lit capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling the same complete all as specified and as directed |
| 96 | Removing plants/herbs grown on walls/junctions with roots using herbicide chemicals and of existing brick and concrete in high raised building at any storeyed and making good the disturbed surfaces as per existing complete all as specified and directed. |
| 97 | M&L for clearing the blockage of WHB, bottle trap, urinal, sink etc by manually/mechanically and removing blockage from entire system and making it fully function complete all as specified and directed. |
| 98 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 99 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 100 | S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 101 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed |
| 102 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed |
| 103 | M&L preparation of new steel surfaces of any descriptions over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and as directed |
| 104 | Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. complete all as specified and as directed |
| 105 | Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor wire drawn into existing concealed conduit including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following point wiring :- . 105.01 One light/ fan/ exhaust fan/ buzzer point controlled by one switch. |
| 106 | One 3 pin socket outlet 6 Amps, Independent board with cables 1.5 Sqmm size. |
| 107 | One 3 pin socket outlet 6 Amps,same board with cables 1.5 Sqmm size. |
| 108 | One light point controlled by two 2- way switches, with cable 1.5 Sqmm size. |
| 109 | All as per item ser no-105 above here in before but one 3 pin socket outlet 6/16 Amps, indipendent board with cables 4.0 Sqmm size |
| 110 | Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor drawn into PVC Conduit and Casing & caping fixed on wall/roof/ceiling including wall cutting etc of size not less than 20 mm dia including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following :- . 106.1 One light point controlled by one switch. |
| 111 | One 3 pin socket outlet 6 Amps, indipendent board with cables 1.5 Sqmm size. |
| 112 | All as per item ser no-106 above here in before but one 3 pin socket outlet 6/16 Amps, indipendent board with cables 4.0 Sqmm size. |
| 113 | M&L for sub main wiring for phase and neutral with PVC FRLS insulated unsheathed multi stranded along with earth wire FRLS PVC insulted copper conductor, single core cable in and including surface/concealed /PVC conduit appropriate size including cutting chases on brick walls concrete surfaces not exc 10cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishes as specified for the following sizes. . 108.01 2x 1.5 sqmm and 1x 1.5 sqmm as earth wire |
| 114 | 2x 4.0 sqmm and 1x 4.0 sqmm as earth wire |
| 115 | Taking down existing rusted switch board sunken box from site including removing fixtures and fittings such as switch, socket fan regulator complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces necessary plaster, white wash matches with existing colour of wall, floors, etc. complete all as specified and as directed. |
| 116 | Supply and fixing in repair of GI metal flush box suitable for mounting moduler plate of following modules:- 110.01 1 or 2 Module |
| 117 | 3 Module |
| 118 | 4 Module |
| 119 | 6 Module |
| 120 | 8 Module |
| 121 | 12 Module |
| 122 | Supply and fixing in repair of combined both frame and cover plates fixing on mounting boxes for following modules:- 111.01 Cover plate with frame,2 Module |
| 123 | Cover plate with frame,3 Module |
| 124 | Cover plate with frame,4 Module |
| 125 | Cover plate with frame,6 Module |
| 126 | Cover plate with frame,8 Module |
| 127 | Cover plate with frame,12 Module |
| 128 | Supply and fixing in repair of modular switch one way 6A white Active one module complete all as specified and as directed. |
| 129 | Supply and fixing in repair of modular socket 6A, 3 pin combined two module complete all as specified and as directed. |
| 130 | Supply and fixing in repair of modular switch 16A, 3 pin combined two modulecomplete all as specified and as directed. |
| 131 | Supply and fixing in repair of modular socket 16A, 3 pin combined two module complete all as specified and directed. |
| 132 | Supply and fixing in repair modular bell push 6A one module complete all as specified and as directed. |
| 133 | S&F in repair for switch piano, flush type single pole , one way 6 amp complete all as specified and as directed |
| 134 | S&F in repair for switch socket combination 2 in 1, 5 pin, 6 Amp flush type complete all as specified and as directed |
| 135 | S&F in repair for switch socket combination 2 in 1, 6 pin, 6/16 Amp flush type universal complete all as specified and as directed |
| 136 | S&F in repair for switch socket combination 2 in 1, 3/5 pin, 6 Amp flush type with gang box complete all as specified and as directed |
| 137 | S&F in repair for switch socket combination 2 in 1, 5/6 pin, 6 and 16 Amp flush type universal including gang box complete all as specified and as directed |
| 138 | Supply and fix Energy saving not less than 35 Watts LED light fitting ,IP66 powder coated pressure die cast aluminium high power street light with heatresisant toughened glass with lens by providing GI pipe medium grade 25 mm dia 1.5 Mtr in length with suitable size MS Clamp two nos made out of 25x3 mm FI incl two coat of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting and including taking down old u/s damaged complete all as specified and directed. |
| 139 | Supply and fix for MCB SPN 230 V, 40-63 Amps with breaking capacity 10KA C curve complete all as specified and as directed Note : Including taking down old unserviceable. |
| 140 | Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA C urve complete all as specified and as directed Note : Including taking down old unserviceable. |
| 141 | S& F for modular sheet metal enclosure double pole and neutral with a three pin and earth plug and socket complete with one SP MCB 25-32 Amps complete all as specified and directed |
| 142 | Supply and fix Eco compact wall mounted LED batten for T8 LED tube with ULTRON high efficency LED polycarbonate tube with in built driver and metal heat sink 20/22 watt icluding taking down old unserviceable fittings complete all as specified and directed |
| 143 | Supply and fix high efficiency wall mounted LED batten type polycarbonate tube of 10W 2 ft LED and including taking down old unserviceable fittings complete all as specified and as directed |
| 144 | S & F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc and including taking down old complete all as specified and as directed. |
| 145 | Supply and fixing in repair of modular fan step regulator,120 W-2 module complete all as specified and as directed. |
| 146 | Supply and fix louver shutter suitable for 300/450 mm exhaust fan of any make and sweep including taking down old damaged corroded unserviceable shutter complete all as specified and as directed. |
| 147 | Material and labour for fixing metal mesh with fine holes for exhaust fans of 300mm including taking down existing old u/s mesh complete all as specified and as directed |
| 148 | Supply only ceiling fan mounting clamp with Rubber bush with nut and bolt suitable for ceiling fan any size including taking down and hanging up in existing position complete all as specified and as directed |
| 149 | Supply only down rod 1/2 feet long suiatable for ceiling fan including taking down and hanging up in existing position complete all as specified and as directed |
| 150 | Supply only down rod 3/4 feet long suiatable for ceiling fan including taking down and hanging up in existing position complete all as specified and as directed |
| 151 | Supply only canopy suitable for ceiling fan all as directed.including taking down and hanging up in existing position complete all as specified and as directed |
| 152 | Supply only Capacitor 1.5-2.5 MFD, AC 240 volts, Temperature ranges from -25 to +55 Deg C capacity including taking down and hanging up ceiling fan in existing position complete all as specified and as directed |
| 153 | Taking down exhaust fans (Steel body/ plastic body) of any make/size and sweep from wall/ceiling hook/existing position and transporting to workshop for repairs and Material and labour for rewinding of burnt out fan motor with super enameled copper winding wire of existing gauge/size including necessary tapping, varnishing and dismantling,taking down burnt copper winding,reassembling and testing for smooth functioning incl painting with two coats of synthetic enamel paint of approved tint including cleaning, scrapping etc complete all as specified and as directed |
| 154 | Taking down wall mounted fans/pedestal fan of any make/size and sweep from wall/ceiling hook/existing position and transporting to workshop for repairs and Material and labour for rewinding of burnt out fan motor with super enameled copper winding wire of existing gauge/size including necessary tapping, varnishing and dismantling,taking down burnt copper winding,reassembling and testing for smooth functioning incl painting with two coats of synthetic enamel paint of approved tint including cleaning, scrapping etc complete all as specified and as directed |
| 155 | Taking down air circulator fans of any make/size and sweep from wall/ceiling hook/existing position and transporting to workshop for repairs and Material and labour for rewinding of burnt out fan motor with super enameled copper winding wire of existing gauge/size including necessary tapping, varnishing and dismantling,taking down burnt copper winding,reassembling and testing for smooth functioning incl painting with two coats of synthetic enamel paint of approved tint including cleaning, scrapping complete all as specified and as directed |
| 156 | Taking down ceiling fans of any make and sweep from ceiling hook/existing position and transporting to workshop for repairs and Material and labour for rewinding of burnt out fan motor with super enameled copper winding wire of existing gauge/size including necessary tapping, varnishing and dismantling,taking down burnt copper winding,reassembling and testing for smooth functioning incl painting with two coats of synthetic enamel paint of approved tint including cleaning, scrapping complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender