Tender For Provn Of Covered Hardstanding In Front Of Urc And Qty-03 Flame Proof Lights In Stn Afnet Section At Af Stn Dadri Under Aor Of Ge (Af) Faridabad
Tender Value
44.32 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
16 days left
EMD
88640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Covered Hardstanding In Front Of Urc And Qty-03 Flame Proof Lights In Stn Afnet Section At Af Stn Dadri Under Aor Of Ge (Af) Faridabad
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, complete all as specified and directed. |
| 2 | Excavation in trenches n. exc 1.5 m wide and 1.5 m deep or for foundation etc and for shafts, wells, manholes or similar items n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed. |
| 3 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete etc, complete all as specified and directed. |
| 4 | Returning filling in incl spreading, levelling,watering,and well ramming in layers n exc 25 cm in soft loose soil, complete all as specified and directed. |
| 5 | Removing excavated surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5mtr above from the starting point complete all as specified and directed. |
| 6 | M&L for RCC 1:2:4 type B1 nominal mix using 20mm graded crushed stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc, basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 7 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on flat surface, rough finished, complete all as specified and directed. |
| 8 | M&L for reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 9 | M&L for reinforcement TMT bars 5 mm dia and over up to and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 10 | M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed. |
| 11 | M&L for rendering 15 mm thick, in cement mortar 1:4 over brick or concrete surfaces, finished fair and even without using extra cement, mixed with water proofing compound @ 3% by weight of cement all as specified and directred. Note : Integral water proofing compound shall be measured and paid separately |
| 12 | Supply only integral water proofing compound conforming to IS-2645-1975, complete all as specified and directed. |
| 13 | M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer, complete all as specified and directed. |
| 14 | S&F for plates (plain or chequered) channels, Fe 410-W (GdeE- 250) square cut or notched (ordinary and counter sunk) forming holes, without any attachment, complete all as specified and directed. |
| 15 | S&F for mild steel work as in tubular post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St-240, complete all as specified and directed. |
| 16 | S&F for structural steel as in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe 410 - W (Gde - E 250 quality A), complete all as specified and directed. |
| 17 | M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5cm and n exc 30cm long dia 16 to 20 mm, complete all as specified and directed. |
| 18 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamelled paint over a coat of red oxide, complete all as specified and directed. |
| 19 | S&F for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 20 | S&F for pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 21 | M&L for hardcore of broken stone of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 22 | M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection, complete all as specified and as directed. |
| 23 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone agg 40 mm thick, complete all as specified and directed. |
| 24 | M&L for 600mm x 600mm x 10 mm thick coloured vetrified Light shade tiles shade as approved flooring (in any pattern) and jointed with neat cement slurry over 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor, complete all as specified and directed. |
| 25 | M&L for 600mm x 600mm x 10 mm thick coloured vetrified light shade tiles shade as approved Skirting/dados (in any pattern) and jointed with neat cement slurry over 15 mm thick cement plaster in CM 1:4 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and directed. |
| 26 | M&L for first quality glazed ceramic coloured tiles of (300 x 600mm) x 7mm thick, (shade and as approved by GE) laid on vertical surfaces such as skirting, dados and risers to steps etc. laid over and including 10 mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed. |
| 27 | M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types nd including 20mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 28 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm tickness, M-40 grade, set, jointed and pointed in neat cement slurry in floors with grey cement & pigments complete all as specified and directed. |
| 29 | M&L for 30mm thick for sand cushioning for laying of inter locking tiles (paving blocks) complete all as specified and directed. |
| 30 | M&L for pre-cast PCC 1:2:4, Type B-0, using 12.50 mm graded crushed stone aggregate as kerb stone set in cm 1:6, inclding form work, complete all as specified and directed. |
| 31 | S&F for exposed metal frame ceiling with calcium silicate 8mm thick board (595mm x 595mm) of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and directed.Note :- Frame work for ceiling shall be measured and paid separately. |
| 32 | S&F for powder costed aluminium snap grid frame work for false ceiling and hangers 4mm GI wire (up to 1200mm length) levelled and fixed with frame, complete all as specified and directed. |
| 33 | S&F for rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe 410-W (Gde E-250 quality-A) with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, fittings and hanging, also fastering and fixing complete all as specified and directed. Please Enable Macros to View BoQ information |
| 34 | S&F for rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe 410-W (Gde E-250 quality-A) with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, fittings and hanging, also fastering and fixing complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender