Tender For Repairs To Kitchen, Bath, Toilet And Sanitary Fittings And Cleaning Of Rcc/Pvc Over Head Tanks And Connected Works In Zone C Area Under Age B/R (N) No I Of Ge (North) Secunderabad.
Tender Value
38 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
13 days left
EMD
76000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Kitchen, Bath, Toilet And Sanitary Fittings And Cleaning Of Rcc/Pvc Over Head Tanks And Connected Works In Zone C Area Under Age B/R (N) No I Of Ge (North) Secunderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish off the premises etcand removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 2 | M&L Non-skid coloured ceramic tiles 7 to 8mm thick rectangular area of each tiles exc 0.06 sqm n exc 0.11 sqm as in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc including screed bed or bedding layer of 15 mm thick CM (1:6) for laying floor finishes complete all as specified and directed. |
| 3 | M&L Non-skid coloured ceramic tiles 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqm as in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc including screed bed or bedding layer of 15 mm thick CM (1:6) for laying floor finishes complete all as specified and directed. |
| 4 | M&L Non-skid coloured ceramic tiles 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqm as in vertical surfaces such as skirting,dado,etc and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of 10 mm thk in CM (1:4) complete all as specified and directed. |
| 5 | M&L Glazed coloured ceramic tiles of size 300 x 450 x 8 to 9 mm/ 450 x 350 x 8 to 9 mm thick as in vertical surfaces such as skirting,dado,etc and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of 10 mm thk in CM (1:4) complete all as specified and directed. |
| 6 | M&L RCC (1:2:4) (nominal mix) type B1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors,roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as directed. |
| 7 | Use and waste of formwork to sides and soffits o floor or roof beams, beam haunhings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams etc as in rough finished flat surfaces of concrete complete all as directed. |
| 8 | S & F Mild steel TMT bars 10 mm dia over, cut to length, bent to shape required including crancking bending spirally for hooping for col hooking ends and binding with and including mile steel wire non less than 0.9 mm dia securing with clips in quality complete all as specifed and directed. |
| 9 | All as per item No. 08 above, but 6mm to 8mm dia quality confirming complete all as spd and directed. |
| 10 | M&L 18 to 20 mm thick Machine cut granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like laid over & including 10mm thick bedding /backing coat in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed. |
| 11 | Rounding and moulding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed. |
| 12 | Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 13 | M&L Brick work with using fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in CM (1:6) complete all as specified and as directed |
| 14 | M&L Brick work with sub-class 'B' bricks, straight, or curved on plan to any radius as in half brick thick wall in CM (1:4) complete all as specified and directed. |
| 15 | Demolition of concrete in sunken floor incl removal of filling etc complete including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 16 | M&L Rendering 15 mm thick CM (1:3) on fair face of brickwork or concrete surfaces of sunken floors duly mixed with water proofing compound as per manufacturer's instructions and finished even and smooth without using extra cement complete all as specified and as directedNote : Water proofing compound shall be measured and paid separately under relevant items in this schedule. |
| 17 | M&L Application of one coat of water based bitumen emulsion primer at the rate of 0.3 litre per SQM after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP polymeric membrane of weight 3 kilogram per SQM and minimum 3mm thick reinforced with polyster non oven fabric (weight not less than 150 gm/SQM) over that a coat of blown bitumen of 85 / 25 at the rate of 1.2 kilogram per SQM over that providing a sand layer of 25mm thick thick in sunken floors complete all as specified and as directed. |
| 18 | Supply only integral water proofing compound. |
| 19 | M&L Providing PCC (1:5:10) type E2 (using 40 mm graded stone aggregates) as in filling in sunken floor and mass concrete complete all as specified and as directed. |
| 20 | Taking down cement plaster of any description and thickness on brick walls including racking out joints, hacking for key, scrubbing down with water etc including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 21 | M&L Rendering 12 mm thick CM (1:4) on fair faces of brick work or concrete surfaces without using extra cement complete all as specified and as directed |
| 22 | M & L Rendering 5 mm thick in CM (1:3) on concrete surfaces of ceiling finished even and smooth without using extra cement in patches n exc 3 sqm each patch all as specified and as specified. |
| 23 | M&L Preparation of newly plastered surfaces of walls and applying three coats of white wash on wall surfaces complete all as specified and as directed |
| 24 | M&L Complete removal of existing treatment of old painted wall surfaces and applying two coats of Acrylic distemper over and including a coat of primer over and including 3.00 mm thick white cement based wall care putty in two layers smooth finish.etc of approved make & shade up to any height etc, complete all as specified and as directed. |
| 25 | M&L Preparation of old painted surfaces including brooming down or steel wire brushing scraping down smoke soot, moulds, moss: efforescent salts and trading oil, greasy spots and applying two coats of Acrylic distemper and including wherever necessary filling of nail holes/ inequalities with Putty for smooth finish of any height .etc complete all as specified and directed. |
| 26 | M & L Preparing newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed. |
| 27 | Demolition of concrete in ground floors (un re-inforced) and paving n.exc. 15 cm thickness (below or above ground level) and including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 28 | M&L 40mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floor finishes and finished even and smooth using extra cement complete all as specified and as directed. |
| 29 | M&L 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) in plinth protection / paths laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at the junction of wall and plinth protection , at 3 metre interval and every change of direction duly filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth to be sealed with ceiling compound grade ‘A’ complete all as specified and as directed |
| 30 | Dismantling / taking down PVC/ Cast iron soil /waste pipes 100 mm / 75mm bore including all fitting like bends etc complete all as specified and directed |
| 31 | S&F PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing of stainless steel grating in ground shape etc complete all as specified and as directed. |
| 32 | S&F 75mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed. |
| 33 | S&F 110mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed. |
| 34 | S&F 75mm bore PVC (SWR) bends any radius dimnishing pieces or tapers with access doors etc, complete all as specified and as directed. |
| 35 | S&F 110mm bore PVC (SWR) bends any radius dimnishing pieces or tapers with access doors etc, complete all as specified and as directed. |
| 36 | S&F 75mm bore PVC (SWR) branch piece, single (single Y ) equal or unequal with access doors etc, complete all as specified and as directed. |
| 37 | S&F 110 mm bore PVC (SWR) junction single (single T ) equal or unequal with access doors etc, complete all as specified and as directed. |
| 38 | S&F for 75mm bore PVC (SWR) vent cowl etc, complete all as specified and as directed. |
| 39 | S&F for 110 mm bore PVC (SWR) vent cowl etc, complete all as specified and as directed. |
| 40 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed. |
| 41 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed. |
| 42 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and directed. |
| 43 | M&L Cutting and grooving of wall for fixing of CPVC pipe lines and after fixing of CPVC pipe line and making good of all cutting surfaces etc complete all as specified and directed. |
| 44 | S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets ,Threaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed. |
| 45 | S&F GI Tubes, ‘medium grade’ galvanised, 15 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 46 | S&F GI Tubes, ‘medium grade’ galvanised, 20 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 47 | S&F GI Tubes, ‘medium grade’ galvanised, 25 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 48 | S&F in repairs 25 mm bore gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed complete all as specified and directed. |
| 49 | S&F 20 mm bore gun meteal,globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed complete all as directed. |
| 50 | M&L Cutting holes into or through brick/ stone walls built in cement mortar of superficial area n exc 150 Sq.cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed |
| 51 | S&F Stainles steel sink with drainage board , 1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers and wastes including bedding in cement morter to dwarf wall or including fixing CI cantilever bracket, connecting union to pipe etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm etc complete all as specified and directed. Make : Nirali, Bule star ISI marked. |
| 52 | S&F in repairs stainless steel kitchen plate rack of size 90cm X120cm X 1mm thick (18 gauge)conforming to the sample kept in the office of the AGE B/R I, complete all as specified and directed. |
| 53 | S&F in repairs vitreous china water closet 'Orissa' pattern of size 580mm X 440mm, white with integral foot rest (excluding flushing cistern), but including PVC flush pipe and provision of lime concrete bedding complete all as specified and as directed. |
| 54 | S&Fin repairs wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc complete all as specified and directed. |
| 55 | S&F in repairs vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittings with long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed. |
| 56 | S&F PVC Low level flushing cistern 10 ltr capacity,including waste pipe, down take pipe, pair of CI brackets and all accessories complete all as specified and as directed. |
| 57 | S&F in repairs 15 mm dia stop valves cast copper alloy, fancy type chromium plated screwed down with long shank and cup (concealed) type, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed complete all as specified and as directed |
| 58 | S&F in repairs 15mm dia CP angle cock fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 59 | S&F in repairs 15 mm dia CP bib tap fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed. |
| 60 | S&F repairs of brass chromium plated, hand shower health faucet with health facet tube of 1.2 metre long and stand etc screwed for 15 mm bore iron pipe for two in one tap for WC complete all as specified and as directed. Make: CAT No F160038 of HINDWARE or equivalent in PARRY WARE/CERA as approved |
| 61 | S&F in repairs brass chromium plated two way Bib tap screwed for 15mm dia bore iron pipe complete all as specified and as directed MAKE: CAT No F200004FT of HINDWARE or equivalent in PARRY WARE/CERA as approved |
| 62 | S&F in repairs15 mm dia Pillar taps, fancy type, chromium plated, screwed down, high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 63 | S&F in repairs 125 mm size chromium plated shower roses with or without swivel joint including fixing to steel pipe or union etc.complete all as specified and directed. |
| 64 | S&F in repairs 15mm size PVC connection with PTMT nuts 450mm length.complete all as specified and directed. |
| 65 | S&F in repairs 15mm size PVC connection with PTMT nuts 600mm length.complete all as specified and directed. |
| 66 | S&F in repairs 32 mm dia low density polyethene pipes (LDPE) pressure rating 6 Kg/cm2 fixed to walls or laid in floors etc.complete all as specified and directed. |
| 67 | S&F in repairs 600 X 450mm bevelled edge mirror, 5mm thick selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed with wooden plugs to wall with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 68 | S&F in repairs Towel Rail, 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats . (Minimum weight 190gms) complete all as specified and as directed. |
| 69 | S&F in repairs 15 mm dia bib tap of standard PTMT of any colour screwed for iron pipe minimum weight 90 grams complete all as specified and as directed. |
| 70 | S&F in repairs 15 mm dia Stop valve of standard PTMT of any colour screwed for iron pipe minimum weight 90 grams complete all as specified and as directed. |
| 71 | S&F in repairs 15 mm dia Angle Stop valve of standard PTMT of any colour screwed for iron pipe minimum weight 90 grams complete all as specified and as directed. |
| 72 | S&F in repairs 15 mm dia Pillar tap fancy type of standard PTMT of any colour screwed for iron pipe minimum weight 120 grams complete all as specified and as directed. |
| 73 | S&F in repairs PVC waste pipe 32/40 mm dia fixed to WHB/Kitchen Sink complete all as specified and as directed |
| 74 | S&F in repairs PVC lid for 500/1000 litres capacity water tank complete all as specified and as directed |
| 75 | Disconnecting existing tanks disconnecting existing tank, setting aside (or lowering if required) for repairs, cheaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repainring, etc. measured separately) , exc 250 Ltrs & not exc 500 Ltrs capacity tanks complete all as specified. |
| 76 | Disconnecting existing tanks disconnecting existing tank, setting aside (or lowering if required) for repairs, cheaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repainring, etc. measured separately) , exc 500 Ltrs & not exc 1000 Ltrs capacity tanks complete all as specified. |
| 77 | Cleaning of PVC water tank capacity n exc 500 litres at any height ( on accessible/inaccessible roofs) by removing all scale, dirt, mud ,any foreign material and removing accumulated silt, other dirty substance, algae, fungus and other bacterial material from sides/bottom of tank by draining / pumping out water/sludge from bottom and other growth from wall/ floor by high pressure cleaning method with jet set, vaccum machine and again cleaning the tank with fresh water and disinfecting the tank Disinfecting by using UV radiator and approved chemical (chloriten). for following capacities of tanks complete all as specified and as directed. Note:- (i) Unit rate quoted shall include for necessary ladder and machinery for pressure cleaning and safety apparatus required for execution of work.(ii) Unit rate quoted shall include for writing the date of actual cleaning with white paint on black background to match with the existing. |
| 78 | All as item No.77 above but of capacity exc 501 ltrs but n exc 1000 litres. |
| 79 | S&F in repair Ball valve of size 15 mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 80 | All as item No.79 above but of size 20 mm dia. |
| 81 | All as item No.79 above but of size 25 mm dia. |
| 82 | S&F Rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetjylene material which is duly stablized with anti-oxident Plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) complete including dismantling existing water tank all as specified and directed. Make: Cat No. HSWS-0100-01-Pure of M/s Sintex |
| 83 | S & F Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary CPVC/GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore PTMT/Brass stop cock, high pressure with crutch or butterfly handle etc complete including dismantling existing water tank complete all as specified and directed.Make: Cat Part No: HSWS-0050-02- Pure of M/S Sintex |
| 84 | Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 85 | M&L 20-25 mm thick machine cut kota stone as in flooring laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab over and inclduing screed bed of 15mm thick in CM (1:6) rubbing and polishing complete all as specified and as directed. |
| 86 | M&L 20-25 mm thick machine cut kota stone laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab as in skirting,dado,etc over and inclduing backing coat of 10mm thick in CM (1:4) rubbing and polishing complete all as specified and as directed. |
| 87 | S & F PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, mitre cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube the two vatted profiles are to be reinforced with 19 x 19mm MS squre tube the 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc all as per specified and directed (Make SINTEX or epuivalent in RAJSHRI/NANDI make as approved by accepting officer) complete all as specified and as directed |
| 88 | Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed |
| 89 | S&F Steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and ave width of aperture 1.4mm shall be used for fly proofing . 4mm thick plain sheet glass to be used for glazing of glazed shutters complete all as specified and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender