Tender For Repairs To Joinery, Built-In Cupboards, Rolling Shutters Gates/ Railings And Roof In Certain Buildings In Zone A & B Area Under Age B/R (North) No. I Of Ge (North) Secunderbad.
Tender Value
35 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
14 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Joinery, Built-In Cupboards, Rolling Shutters Gates/ Railings And Roof In Certain Buildings In Zone A & B Area Under Age B/R (North) No. I Of Ge (North) Secunderbad.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 sqm each complete all as specified and directed |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and directed |
| 3 | S&F Providing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Complete all as specified and directed |
| 4 | S&F Providing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) →specification & drawings given in Section 8 of MES Schedule Part-II 2004 as applicable complete all as specified and directed. |
| 5 | S&F UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile moduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and including Dismantling/Cutting of existing steel windows with the help of Gas cutter and make good and match with existing walls at any hight complete all as as per manufacturers instructions,as specified and directed by Eng-in-charge. |
| 6 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets or frame work complete all as specified and directed. |
| 7 | S&F False ceiling at all heights with fully perforated 12mm thick micro tegular edged or 10mm thick square edged GRG false ceiling tiles of size 595 x 595 mm of approved texture design and patterns having moisture content less than 2% humidity resistance of 99% NRCO.50 to .75 as per IS 8225:1987, Non combustible as per BS 476part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000m, cross-T of size 15 x 32 mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanized @ 80 grams per sqm) i.e, 50mm long , 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x 24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per manufacturers instructions,as specified and directed by Eng-in-charge. |
| 8 | S & F PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, meter cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube the two vatted profiles are to be reinforced with 19 x 19mm MS square tube the 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc., complete all as specified and directed.Make: SINTEX/ RAJSHRI/NANDI as approved by GE. |
| 9 | S&F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and directed |
| 10 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section with bright bolt complete all as specified and directed. |
| 11 | S&F 150 mm size aluminium alloy handles, extruded,fabricated type, anodised complete all as specified and directed. |
| 12 | S & F 300 mm long Mild steel sliding bolt, plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and directed. |
| 13 | S&F in repairs 140 mm long double legged door stopper of aluminium anodized with rubber shoe, nut (2 each on one stopper) with spring complete all as specified and directed. |
| 14 | Hacking out old broken glass (any thickness, size, quality or description) from wooden surface concrete or brick surrounds. Glazed with putty or fixed with beads complete all as specified and directed |
| 15 | S & F Sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and complete all as specified and directed |
| 16 | S & F Sheet glass 3mm thick ordinary quality and glazing with oil putty in square but exceeding 0.5 Sqm in each pane and complete all as specified and directed |
| 17 | S & F Figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and complete all as specified and directed. |
| 18 | S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed withstainless steel wire staples complete all as specified and directed |
| 19 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 20 | M&L 2 nd class hard wood plain fillets of sectional area exc 6& not exc 13 sqcm area .square,rectangular or triangular insection, clean sawn, secured with nails or brads.with bullnosed,splayed,chamfered or rounded on one edge or face. complete all as specified and directed. |
| 21 | M&L 2nd class hard wood plain fillets of sectional area exc13 & not exc 25 sq.cm area .square,rectangular or triangular insection, clean sawn, secured with nails or brads.with bullnosed,splayed,chamfered or rounded on one edge or face and complete all as specified and directed. |
| 22 | S&F 50 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type E-22 complete all as specified and directed |
| 23 | S&F Steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and ave width of aperture 1.4mm shall be used for fly proofing . 4mm thick plain sheet glass to be used for glazing of glazed shutters including 10mm powder coated square saftey grills, locking arrangement and all necessary accessories etc, completed all as specified and directed. |
| 24 | M&L Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 ,complete all as specified and directed. |
| 25 | S & F Sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and complete all as specified and directed. |
| 26 | S&F in repairs 20 mm dia aluminium powder coated (fancy type) tubular curtain rod, complete all as specified and directed. |
| 27 | S&F in repairs aluminium powder coated bracket (fancy type) suitable for 20 mm dia tubular curtain rod (for item above) complete all as specified and directed |
| 28 | M&L Mild steel framed work as in doors and chowkats or gates, ladder etc of angle or other section with gusset plates, rails, braces, MS sheet etc, complete, drilled for fixing of steel sheeting are other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging fittings and conforming to Fe 410-W (Gde E-250) quality ‘A’ complete all as specified and directed |
| 29 | S&F Mild steel sheeting of 1.25 mm thick plain, black sheet as in wall cladding, covering to door shutter and similar works cut to size, holes punched, including round headed screws fixed to steel framing with plan 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete all as specified and directed |
| 30 | S&F in repairs MDF board, 18/19 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed. |
| 31 | S&F in repairs MDF board, 12 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed. |
| 32 | S&F in repairs 18mm thick Plywood grade BWR type BB, fixed with screws to frame work , fixed with screws to timber frame work complete all as specified and directed. |
| 33 | S&F in repairs 12 mm thick Plywood grade BWR type BB, fixed with screws to frame work , fixed with screws to timber frame work complete all as specified and directed. |
| 34 | M&L 1mm thick colour/white Decorative laminate sheet Type I of texture surface finish , colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and directed. |
| 35 | S&F Stainless steel bottle pullout of size 106 mm X 476 mm X 130 mm complete all as specified and directed. |
| 36 | S&F 200mm long stainless steel decorative handle fixed with screws complete all as specified and directed. |
| 37 | S&F 200mm long stainless steel hinge for cabinets auto close concealed type complete all as specified and directed. |
| 38 | S&F Stainless steel telescopic type ball bearing drawer channel of any size complete all as specified and directed. |
| 39 | S&F Stainless steel kitchen basket of size 17\\"x20\\"x4\\" of size complete all as specified and directed. |
| 40 | All as per item No.39 above but of size 17x\\"x20\\"x6\\" complete all as specified and directed. |
| 41 | All as per item No.39 above but of size 17x\\"x20\\"x8 complete all as specified and directed. |
| 42 | Taking down of old bituminous tarfelt or any other type of roof treatment from roof/ concrete surfaces/cement mortar 10mm rendering and cleaning of the roof surface with wire brush to make it free from dust, dirt etc including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 43 | M&L Rendering 10mm thick CM (1:4) on roof surfaces duly mixing with water proofing compound at the rate of 3% by weight of cement and finished even and smooth complete all as specified and directed.Note: Water proofing compound will be measured and paid separately under relevant item in this schedule |
| 44 | Supply only water proofing compound complete all as specified and directed. |
| 45 | M&L Providing water proofing treatment with APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick reinforced with polyester non oven fabric ( weight not less than 150gm/Sqm) applied on one coat of oil based bitumen emulision primer @ 0.3 lit per sqm ( OR as per the directions of manufacturer instructions) including cleaning of surface thoroughly from dust, dirt and projections. Laying of membrane by forced ( torch) application with 10cm overlaps . A coat of blown bitumen 85/25 grade @ 1.2 Kg/sqm to be applied on top of memberane, finally coating the surface with bituminous aluminium paint @ 100gm/Sqm complete complete all as specified and directed. |
| 46 | M&L Making the grooves to 'V' section in existing parapet walls/columns over RCC roofs, cleaning out and tacked the polymeric membrane in to the grooves and sealed solidly with a hot mixture of bitumen and clean dry sand in the ratio of 1:1 by weight etc complete all as specified and directed. |
| 47 | M&L Cleaning of roof and chhajja top surfaces with wire brush, including flashings and junction of parapets, etc., and surface painting, with a layer of blown bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu. m per sq. m, and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and directed. |
| 48 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately), exc 500 Ltrs & not exc 1000 Ltrs capacity tanks complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender