Tender For Construction Work Of Room In Valmiki Auditorium At Baradari Nehru Nagar.
Tender Value
21.60 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
6 days left
EMD
44000
Bank guarantee accepted
Document Fee
854
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Room In Valmiki Auditorium At Baradari Nehru Nagar.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge in cement mortar as per DSR-2023 S.I.No.15.7.4. |
| 2 | Earth work in Excavation by mechanical means hydraulic Excavator)/manual means over areas in foundation( not exceeding 1.50m. in width or 10 sqm on plan) including dressing of sides and rammingof bottoms, lift upto 1.50 m. including getting out the excavated soil and disposal of lift up to 1.50 m and lead up to 30 M. and including filling watering and ramming of excavated of surplus earth as per directed, within a lead of 50m. all kind of soil as per DSR-2023 S.I.No.2.8.1. |
| 3 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excludi,\\"j the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. as per DSR-2023 S.I No. 2.35.3.1 |
| 4 | Providing and laying in position cement concrete of specificed grade excluding the cost of centering and shuttering in foundation in 1:4:8 (with cement, coarse sand & graded stone aggregate nominal 40mm size) of including supply of all materials, labour. Tools& plants etc. required for proper completion of work. as per DSR-2023 S.I.No.4.1.8. |
| 5 | Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement:4coarse sand). as per DSR-2023 S.I.No.6.1.1 |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources).as per DSR-2023 S.I.No.5.3. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings,bases of column.etc as per DSR-2023 S.I.No.5.9.1. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Columns,pillers,post and struts. as per DSR-2023 S.I.No.5.9.6. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for lintels,beams,plinth beam,girders,cantilever as per DSR-2023 S.I.No.5.9.5. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and accessplatform as per DSR-2023 S.I.No.5.9.3. |
| 11 | Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in Superstracture in cement mortar 1:4 (1 cement:4coarse sand). as per DSR-2023 S.I.No.6.4.1 |
| 12 | Steel reinforcement for RCC work including straightening, cutting, bending,placing in position and binding all complete (Thermo-mechanically treated bar of grade Fe-500D. as per DSR-2023 S.I.No.5.22.6 |
| 13 | Excavating, supplying,stacking and filling of local earth (including royality) by mechanical transport up to a lead of 5km also including ramming and watering of earth in layers not exceeding 20 cm in foundation trenches, plinth,sides of foundation etc. comp. for all. as per DSR-2023 S.I.No.2.25a |
| 14 | Supplying and filling in plinth with sand under floor including watering,ramming,consolidationg and dressing complete.DSR-2023 S.I. 2.27 |
| 15 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. as per DSR-2023 S.I.No.10.2. |
| 16 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using flats 30x6mm for diagonal braces and central cross piece as per DSR-2023 S.I.No.10.5.2. |
| 17 | Providing and fixing fly proof wire gauze to windows,clerestory window and doors with 15x3mm and nuts and bolts complete SS-304 wire gauze of .5mm dia wire and 1.4mm aperture on both side complete as per DSR-2023 S.I.10.29.2 |
| 18 | 12 mm thick plaster over wall of 1:4 cement & coarse sand mortar including supply of all materials, labour and t&p etc. as per DSR-2023 S.I.13.4.1 |
| 19 | Providing and laying in position cement concrete of specificed grade excluding the cost of centering and shuttering in foundation in 1:4:8 (with cement, coarse sand & graded stone aggregate nominal 40mm size) of including supply of all materials, labour. Tools& plants etc. required for proper completion of work. as per DSR-2023 S.I.No.4.1.8. |
| 20 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser af steps, over 20 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete DSR-2023S.I.No-11.41.2Size of Tile 600x600 mm |
| 21 | New Item Providing and fixing on wall face 110 mm diameter unplasticised Rigid uPVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes.DSR-2023Material S.I. No.12.41.2 |
| 22 | Making drip coarse in sunshades or facia with 1:3 cement fine sand motatras per direction of Engineer-in-incharge including supply of all material, labour, tools and plants etc required for proper completion of the work. SINo 13.20 New Item |
| 23 | Cutting groove in plaster 1 cm wide and 1 cm deep by using special tools including supply of all material, labour, tools and plants etc required for proper completion of the work.S.I.No-21.20 New Item |
| 24 | Providing and fixing MS fan clamp type I or II of 16 mm dia MS bar bend to shape with hooked ends in RCC slabs during laying including painting the exposed portion of loop as per std. design.as per DSR-2023 S.I. No.10.17 |
| 25 | Providing and fixing circular/ hexagonal cast iron or MS sheet box for ciling fan clamp of internal dia 140mm,73mm height top lid of 1.5mm thic MS sheet with its top surface hacked for proper bonding to lid shall be screwed in to the cast iron/Ms sheet box by mean of 3.3 mm dia round headed screws,one lock at the corner clamp shall be made of 12mm dia MS bar bend to shape as per std. drawing com as per DSR-2023 S.I. No.10.18 |
| 26 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per DSR-2023 S.I.No.13.80. |
| 27 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) as per DSR-2023 S.I.No.13.46.1. |
| 28 | Distempering with 1st quality acrylic distemper ( Readymixed ) of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer as per DSR-2023 S.I.No.13.41.1. |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm as per DSR-2023 S.I.No.13.62.1. |
| 30 | Supply and fixing of M.S sign board.of prescribed size 1.20m *2.75 m with angle 40*40*6 mm iron angle and 1 mm thick ms iron sheet including painting and letter writing complete.approved rate as per S.E.R.E.D. Meerut. |
| 31 | Wiring for light point/ exhaust fan point/ call bell point with 1.5 sq. mm as per DSR Elect-2022 S.I.No.1.10.1 |
| 32 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire DSR Elect-2022 S.I.No.1.14.2 |
| 33 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire DSR Elect-2022 S.I.No.1.14.3 |
| 34 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. DSR Elect-2022 S.I.No.1.31 |
| 35 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.DSR Elet-2022 S.I. 1.32 |
| 36 | Supply, Installation, Testing and commissioning of 1200mm sweep, BEE 5 star rated, ceiling fan with brush less direct Direct current (BLDC) motor, class of instulation B, 3nos. Blades, 30cm long down rod, 2 nos. canoppies, shackel kit, saftey roap, copper winding, power factor not less than 0.9, Service value (CM/M/W) min. 6.00, Air delivery mini. 210Cum/Min, 350 rpm as per IS374-2019 THD less than 10% removal or electronic regulator unit for speed control and all remaining accessories including safty pin, nut bolts, washer tem rises-75deg max. insulation resitance more than 2 mega ohm, suitable for 230v, 50Hz, single phase AC supply erthing etc. as per DSR -2022 DSR Elect-2022 S.I.No.19.1 |
| 37 | Supply and fixing two module stepped type electronic Fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required as DSR-2022 DSR Elect-2022 S.I.No.1.25 |
| 38 | Supply and fixing 5A to 32A rating, 240/415V, 10kA \\"C\\" curve miniature circuit breaker suitable for inducative load of following poles in the existing MCB DB com with connection, testing and commisssioning etc as required double pole as DSR Elect-2022 S.I.No.2.10.3 |
| 39 | Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. SI 701 |
| 40 | Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. SI 1413 CAT-AA |
| 41 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.as per DSR-2023 S.I.17.7.4 |
| 42 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot and cold water supply and all CPVC plain &brass threated fitting,including fixing the pipe with clamp at 1mter spacing.This includes joining of pipes and fittings with one steps CPVC solvent cement and testing of oints complet as per direction of Engineer incharge AS per DSR-2023 SI .18.7.1 15mm dia |
| 43 | Providing and Fixing PTMT Bib cock of approved Quality and Colour 15mm dia AS per DSR-2023 SI .18.54.1 |
| 44 | Providing and Fixing PTMT Stop cock of approved Quality and Colour 15mm dia AS per DSR-2023 SI .18.55.3 |
| 45 | Painting top of roofs with bitumen of approved quality @ 17kg per 10sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete: With residual type petroleum bitumen of grade VG 10t.AS per DSR-2023 S.I.No-12.15.1. |
| 46 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (Brick coba) With average thickness of 120 mm and minimum thickness at khurra as 65 mm. As per DSR-2023 S.I No.22.7.1 |
| 47 | 6 mm thick bearing plaster in 1:3 cement and fine sand finished with a floating coat of neat cement and thick coat of lime wash on top of walls when dry for bearing of RCC slab and beam DSR 2023 S.I.13.17 |
| 48 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. As per DSR-2023 S.I No.12.22 |
| 49 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone ) finished with floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. 40 mm thick floor 20 mm nominal size stone aggregate. As per DSR-2023 S.I No. 11.3.1 |
| 50 | Deduction-5% for Competitive Price Efficiency |
| 51 | Add GST 18% Rs Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender