Tender For Special Repair/Replacement Of False Ceiling And Toilet Of Bldg No P-11 In Sect ‘D And Special Repair To Bldg No P-03 Under Ge Dinjan
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Jul 2026
16 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair/Replacement Of False Ceiling And Toilet Of Bldg No P-11 In Sect ‘D And Special Repair To Bldg No P-03 Under Ge Dinjan
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 2 | M&L for Anodised aluminium snap grid size 605 X 605 mm frame work for false ceiling including for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long duly provided with 6 mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation and acoustic purpose fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 4 | M&L for Cement concrete type B1- 1:2:4 (20mm graded aggregate) in sub base finishing cement concrete surface even and fair without using extra cement complete all as specified and directed |
| 5 | M&L for Non - skid Ceramic or coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry over and including 15 mm screed bed in CM (1:6) and pointed in white or coloured cement to match the shade complete all as specified and directed. |
| 6 | M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm(300x300x7mm),over and including 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and directed. |
| 7 | M&L for glazed ceramic coloured tiles in vertical surfaces of size 450X350X7 mm thick set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as dado/skirting and facea of side bldg over & including 10mm thick rendering in CM(1:4) complete all as specified and directed. |
| 8 | Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 9 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar in 1:4 complete all as specified and directed |
| 10 | M&L for rendering 10 mm thick internal wall on fair faces of brick work or concrete surfaces in cement Mortar in 1:6 and finished even and smooth (without using extra cement)complete all as specified and directed. |
| 11 | Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 12 | M&L for cement concrete 75mm thick 1:2:4 type B-2 using 40mm graded stone aggregate as in pathways/hardstanding laid in alternate ways, each panel not exceeding 3.00 Sqm finished the surface even and fair without using extra cement and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed. |
| 13 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, duly filled with sealing compound grade A complete all as specified and directed |
| 14 | Dismantling of unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 15 | M&L for Second class hard-wood well seasoned in scantlings wrought timber fixed complete all as specified and directed |
| 16 | Taking down the Chowkhats or frames not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and directed |
| 17 | Taking down the Chowkhats or frames exc. 1.5 sqm but n exc 4sqm each (without taking off shutters from the frames) complete all as specified and directed |
| 18 | S&F of Powder coated aluminium sliding window three track including following components/specification complete all as specified and directed.(i) Thickness and weight per meter length of aluminium frame and section of shutter all as shown on drawings.(ii) All vertical/ horizontal joint shall be extruded aluminium section so as to avoid any play between jointed members.(iii) All otheraccessories such as jointing cleats,glazing clips,rubber neoprene packing,anodised aluminium snap beading,screws,etc.(iv)stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples,etc.(v) Sheet glass 4mm thick selected quality and glazing with oil putty or fixed with wooden beads in square exceeding 0.5sqm in each pane.(vi) Rest all as specified in drawing No. CESZ/2015/TD/007 SheetNo. 1R/5,2R/5,3R/5,4R/5,5R/5. |
| 19 | S&F for 8mm thick aluminium duco grill size 75x75mm fixed to windows or ventilators with aluminium flat 30x3mm complete all as specified and directed. |
| 20 | S&F for anodised aluminium ventilator shutters side hung type without sash bars aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1no) .hinges type B-21 100mm long(02 no) suitable handle (01no),complete all as specified band directed. |
| 21 | S&F for 4mm thick frosted glass ordinary quality and glazed with oil putty or fixed with beads in square n.exc 0.5sqm in each pane complete all as specified and directed. |
| 22 | S&F for Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 23 | S&F for Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 24 | S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 25 | S&F 35mm thick, glazed/skelton shutters with second class hard wood,open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (a) complete as specified and directed. |
| 26 | S&F for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 27 | M&L for Preparation of new or untreated surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and directed. |
| 28 | S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed |
| 29 | S&F Aluminium Handle 150 mm long cast type, anodised extruded fabricated type complete all as specified and directed. |
| 30 | S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 31 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 32 | S&F for 375 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 33 | S&F Floor door stopper (Overall length of cover plate 140 mm) of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 34 | M&L PCC 1:2:4 type B0 (using 12.5 mm graded aggregate) as in hold fast and filling of steel chowkhat etc. complete all as specified and directed |
| 35 | S&F for mild steel flat iron as in hold fast 25x6 mm confirming to Fe290 Gde E-165 complete all as specified and directed |
| 36 | S&F for Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing in SSR Part II 2010 complete all as specified and directed |
| 37 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 complete all as specified and directed |
| 38 | M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 39 | M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement Mortar in 1:4 using water proofing compound in top layer (Water Proofing Compound measured separately) finished even and smooth (without using extra cement) complete all as specified and directed. |
| 40 | M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper-oil-emulsion over a coat of primer including 3mm thick wall care putty to make surface even and smooth complete all as specified and directed. |
| 41 | M&L for preparing old plastered surfaces of walls by washing, rubbing down and scraping of existing distempering/painted surfaces etc and applying one coat of distemper oil emulsion complete all as specified and directed. |
| 42 | M&L for preparation of new walls by scrapping with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc. and applying two coats of 100% premium Acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistant as per IS-15489:2004 alkali and fungal resistant exterior paint of required shed (company depot tinted) with silicon additives 1.43 litrs/ 10 Sqm over and including primer coat of exterior primer applied 0.90 litre/10 Sqm over new surfaces using Airless spray technology with maximum working pressure of 3300 PSI and capable of operating single spray gun with a maximum material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and acessories over a coat of 1mm thick wall care putty (Plaster of Paris) to to prepare the surface evena and smooth complete all as specified and directed. |
| 43 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed |
| 44 | Dismantling of water tank Capacity exc 500 not exc 1000 Ltrs and removing to store complete all as specified and as directed |
| 45 | M&L for Hoisting and Fixing of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position specified in SSR Part I complete all as specified and as directed. |
| 46 | S&F for 20 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 47 | S&F for 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 48 | M&L for cutting chases, pinning in brickwalls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20 cm girth complete all as specified and as directed. |
| 49 | S&F in repair health faucet cast copper alloy with push button& 1m long flexible steel pipe with PVC lining suitable for 15mm bore pipe complete all as specified and directed. |
| 50 | S&F for mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 51 | M&L for Preparation of old painted surfaces of steel and iron surfaces of steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying one coat of synthetic enamel paint complete all as specified and directed |
| 52 | S&F in repairs white vitreous china squatting pan orissa pattern of size 580mmx440 mm white, with integral foot rests connected with 'P' or 'S' trap and flushing pipe and taking out old WC & connections incl PCC 1:4:8 complete all as specified and directed |
| 53 | S&F in repairs PVC low level flushing cistern 10 litre capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC conection pipe and flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and directed |
| 54 | S&F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified anddirected. |
| 55 | S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed |
| 56 | S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed |
| 57 | M&L PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement including disconnection of old existing trap, and connected with existing water pipe complete all as specified and directed. |
| 58 | S&F for Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 59 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed |
| 60 | S&F for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 61 | S&F for Tubular towel rail, 20mm dia, D type, 60cm long Brass Chromium plated between flanges complete all as specified and as directed |
| 62 | S&F in repairs soap dish vitreous china coloured approximate size (160mmx160mmx90mm) complete all as specified and as directed. |
| 63 | S&F in repair pillar taps of size 15mm, chromium plated fancy type cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 64 | S&F in repairs for bib taps fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore in repair complete all as specified and directed. |
| 65 | S&F in repairs 15 mm bore dia cast copper alloy fancy type, chromium plated stop valves, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 66 | S&F in repairs 15mm stop valves (concealed type), cast copper alloy fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 67 | S&F 15mm dia Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 68 | M&L for 32 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 69 | Supply and laying of 20mm dia of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. tranches complete all as specified and directed. |
| 70 | Supply and laying of 25mm dia of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. tranches complete all as specified and directed. |
| 71 | S&F for 20mm dia CPVC Brass thread elbow complete all as specified and directed. |
| 72 | S&F for 25mm dia CPVC Brass thread elbow complete all as specified and directed. |
| 73 | S&F for 20mm dia CPVC Brass thread Tee complete all as specified and directed. |
| 74 | S&F for 25mm dia CPVC Brass thread Tee complete all as specified and directed. |
| 75 | S&F for 20mm dia CPVC Brass thread union complete all as specified and directed. |
| 76 | S&F for 25mm dia CPVC Brass thread union complete all as specified and directed. |
| 77 | S&F for 20mm dia CPVC ball valve complete all as specified and directed. |
| 78 | S&F for 25mm dia CPVC ball valve complete all as specified and directed. |
| 79 | S&F for 25mm dia CPVC tank adopter complete all as specified and directed. |
| 80 | Dismantling Plain or corrugated Asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings complete all as specified and directed. |
| 81 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 82 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 83 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long duly provided with 8 mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulatedjointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and as directed. |
| 84 | M&L for two coats of distempering on seamless ceiling with distemper oil emulsion with white or tinted over 3 mm thick wall care putty to make the surface even and smooth including preparation of ceiling complete all as specified and directed. |
| 85 | Providing and fixing n. exc 2.0 sqm each factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 86 | S&F for 5.5 mm thick sheet glass ordinary quality and glazed with oil putty or fixed with beads in square exc 0.5 Sqm in each pane omplete all as specified and as directed. |
| 87 | S&F Wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples complete all as specified and directed. |
| 88 | S&F for Aluminium (Extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 89 | M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 90 | M&L for light shade vitrified Ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed in CM 1:6 complete all as specified and directed. |
| 91 | M&L for non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.18 sqm but n. exc.0.38 sqm, in floor/wall etc laid over and incl 15 mm thick screed bed or bedding layer of cement mortar in 1:6 set and joined in neat cement slurry and pointed in white or .coloured cement to match complete all as specified and directed. |
| 92 | M&L for 20 mm thick Granite (of any type) work (table rubbled and polished) in steps, Jambs, Pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm screed complete all as specified and directed |
| 93 | Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ceiling complete all as specified and directed |
| 94 | S & F Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed |
| 95 | Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/centrings complete all as specified and directed |
| 96 | S & F GI steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed |
| 97 | Materials and labour for complete removal of existing treatment from walls by scrapping with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc. and applying two coats of 100% premium Acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistant as per IS-15489:2004 alkali and fungal resistant exterior paint of required shed (company depot tinted) with silicon additives 1.43 litrs/ 10 Sqm over and including primer coat of exterior primer applied 0.90 litre/10 Sqm over new surfaces using Airless spray technology with maximum working pressure of 3300 PSI and capable of operating single spray gun with a maximum material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and acessories complete all as specified and directed. |
| 98 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. |
| 99 | M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (gde-E-250) quality -A complete all as specified and directed. |
| 100 | Demolition of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed |
| 101 | S&F in repairs110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed |
| 102 | S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed |
| 103 | S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed |
| 104 | S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed |
| 105 | S&F for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed |
| 106 | S&F for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed |
| 107 | S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and directed |
| 108 | S&F for 75 mm bore PVC (SWR) bends any radius complete all as specified and directed |
| 109 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 110 | M&L for RCC (nominal mix ) type B1 1:2:4 (20 mm graded aggregate) as in slab supported on wall beam and coloumn in floor roof landing balconies canopies deck slab and in shelves, etc complete all as specified and directed. |
| 111 | M&L for form work flats sides to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work ; not exc 200 mm thick complete all as specified and directed. |
| 112 | M&L for Mild steel TMT bars 6mm to 8mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 113 | M&L for Mild steel TMT bars 10 mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 114 | Demolition of unreinforced cement concrete in any description and any position complete all as specified and directed |
| 115 | M&L for PCC 1:4:8 Type D2 (40 mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 116 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed |
| 117 | S&F in repair 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 118 | S&F Counter top WHB vitreous china oval type coloured with brackets fitted on granite counter top of Size: 560x400x205mm. Make : Cera Cat Part No : S2030103 or equivalent with Cat Part No as per Make specified in PS. |
| 119 | S&F health faucet hose and hook all as specified and directed. Make : Cera (Cat Part No T-9937A1) or equivalent with Cat Part No as per Make specified in PS. |
| 120 | S&F 15mm dia Two way Bib cock all as specified and directed.Make : Parryware (Cat Part No G3034A1) or equivalent with Cat Part No as per Make specified in PS. |
| 121 | S&F 15mm dia Angle Stop Cock with wall flange all as specified and directed.Make : Parryware (Cat Part No G1807A1) or equivalent with Cat Part No as per Make specified in PS. |
| 122 | S&F Towel Ring all as specified and directed.Make : Parryware (Cat Part No T6402A1) or equivalent with Cat Part No as per Make specified in PS. |
| 123 | S&F Corner self complete all as specified and directed. |
| 124 | S&F Single piece white colour EWC of Size 620x350x725mm . Make : Parryware ( Cat Part No C8852) or equivalent with Cat Part No as per Make specified in PS. |
| 125 | S&F standard towel rack Make : Parryware Cat part No -T6008A1 or equivalent with Cat Part No as per Make specified in PS. |
| 126 | S&F in repairs Basin Mixer without pop up all as specified and directed. Nake : Parryware (Cat Part No G01114A1) or equivalent with Cat Part No as per Make specified in PS. |
| 127 | S&F for anodised aluminium door shutter frame work fabricated by using medium grade, fancy type as per sample kept in GE Office, box sections as per drgs. Door/partition panels shall be 8 mm thick plain select quality glass panes inserts, fixed with aluminium anodises glazings clips and rubber beading including all standard accessories. etc complete all as specified and as directed.Note:- TD drawing CESZ/2015/TD-005 |
| 128 | M&L for Water proofing treatment on RCC roof etc. comprising with the following operation & as specified herein below:- (a)Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100 m n.exc.250m. (b) M&L for 15 mm thick cement mortar in 1:4 finished even and smooth.(c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per sqm conforming IS-3384. (e) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (f) One coat of aluminium paint over APP membrane @0.11Kg/Sqm.Note:- Prior to execution of the APP Membrane works, leak proof test shall be done by ponding water on roof slab to minimum depth of 25 mm. The entire roof slab shall be flooded with water for 48 hours. The necessary barrier shall be made to make feasible to stagnate water for 48 hours on roof slab. |
| 129 | Taking down carefully copper/ aluminium point wiring (light,fan,buzzer,socket or power) complete including fixture and fittings such as switches, ceiling roses,pendants, regulators, sockets light fitting etc for taking credit removing from site and making good distrubed surface of walls, floors etc complete all as specified and directed. |
| 130 | M&L point wiring(surface type) for one light point or one fan point controled by one switch complete all as specified and directed. using 1.5 sqmm nominal cross sectional area copper conductor mutimultistranded ,PVC insulated unsheathed , FR-LSH cables in and including PVC concealed conduit and fittings, including 1.2mm thick pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multi-multistranded copper conductor , FRLSH, green PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. for one light/fan point cntrolled by one number one way switch complete all as specified and directed. |
| 131 | All as per Srl Item No 142 above but for one 3 pin socket outlet, 5 Amp independent complete all as specified and directed. |
| 132 | All as per Srl Item No 142 above but for one 3 pin socket outlet, 5 Amp on the same board with other switches complete all as specified and directed. |
| 133 | All as per Srl Item No 142 above but with 2.5 sqmm complete all as specified/directed. |
| 134 | All as per Srl Item No 142 above but for with 4 sqmm complete all as specified/directed. |
| 135 | S & F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed. |
| 136 | Supply and fixing in repair of MCB Distribution board SPN 8 Way for mounting SPN/ SP MCBs as Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and suitable rated bus bar, DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed by Engr-in-charge. |
| 137 | S & F socket outlet 2 in 1, 5 Amp flush type complete all as specified and directed. |
| 138 | S & F Switch socket combination 2 in 1, 5 Amp flush type complete all as specified and directed. |
| 139 | S & F Switch socket combination 5A/ 16A, 5 in 1flush type complete all as specified and directed. |
| 140 | S & F stepped type electronic fan regulator flush type complete all as specified and directed. |
| 141 | S & F Ceiling rose, 3 way PVC insulated body complete all as specified and directed. |
| 142 | S&F lamp holder and bulb and S & F Lamp holder , PVC / Polycarbonate type with back plate suitable for batten fitting with a LED bulb 9w fixed at each holder all complete all as specified. And directed. |
| 143 | Supply and fixing LED fitting inverter type 1x18 watts, with efficacy of 110lm/W with burning hour of 25000 hr 220volts AC decorative box type with driver,holder LED tube light conncting up to 3 core flexible copper conductor cable of suitable size from ceiling rose complete as specified and directed. |
| 144 | S & F MCB SP 'C' curve 6 to 32 Amps with breaking capacity 10 KA all comlplete as specified and directed. |
| 145 | S & F MCB SPN 'C' curve 6-32 Amps with breaking capacity 10 KA.all comlplete as specified and directed. |
| 146 | S&F LED building light fitting 35W 230 volts AC outdoor tye with high pressure die cst aluminium hostng and heat resistant complete with driver, lamp baacket with impact and corrosin resistant including thermal management in multiple optics complete wth IP 65/66 protection including MCB SPN 40 Amps 'B' Series 10 KA 240 volts complete all as specified/directed. completed as directed and specified.Make : Phillips Cat Part No. BRP030 LED or equivalent to make as specified in PS. |
| 147 | S&F Bldg light bracket fabricated out of GI Tubing light grade 32 mm bore Bend to the shape as directed and of length 1.5 mtr complete with mounting MS clamp of flat iron size 40X5mm of suitable length 02 pairs incl nut bolts etc of suitable size, including taking down old corroded one all as specified and directed. |
| 148 | M & L for Surface Sub main wiring with two runs of single core 6 sqmm PVC insulated , unsheathed multistranded copper conductor 1100 volts FRLSH cable , including one run of 6 sqmm single core PVC insulated unsheathed multistranded copper conductor 1100 volts FRLSH cable as earth continuity drawn through and including one run of PVC concealed conduit heavy duty and connected accessories etc and connecting to common earth dully fixed in repairs complete all as specified and as directed.NOTE:- Two runs of main cable,one run of earth continuity conductor cable and one run of PVC conduit will be measured as one unit for payment purpose. |
| 149 | M & L earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to 4.0mm GI wire by means of bolts and nuts checknuts and washers of galvanised iron or steel all as specified and shown in elecrical plate no 3 of SSR part 1 including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 80 mm dia 150 mm long reinforcement,watering funnel,40 mm dia light grade for protection of earth electrode 20 mm dia for watering all as specified and directed and tested on completion complete all as specified and directed. |
| 150 | Supply and fixing of recess mounted motion sensor LED flat panel 600 x 600mm of 40 Watt made of CRCA sheet steel housing duly powdercoated with high efficient LEDs & glare free full opal diffuser, IP-20 of efficacy 100 lm/w including testing complete all as specified and directed. |
| 151 | Supply & Laying or Fixing or Passing through Pipe, XLPE insulated, Armoured, Electric Power UG Cable (Heavy Duty) with Aluminium Conductor, 1100 Volt Grade, Nominal Cross-Sectional Area 16 sqmm 2 core and Testing, including Brass Compression Cable Gland, Terminal Lug, etc including taking down complete all as specified and as directed. |
| 152 | Excavating in Trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth, Taking Out and Laying of Cables, etc. and getting out in Soft/ Loose Soil, complete all as specified and as directed. |
| 153 | Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 250mm in Soft/Loose Soil, complete all as specified and as directed. |
| 154 | Removing excavated Materials (Soils) not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the Starting Point in Soil, complete all as specified and as directed. |
| 155 | M&L Sand Cushioning (dry) in Trenches for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 230mm Spread thick -ness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. |
| 156 | S&F Sub-Class B brick, well burnt, laid breadth-wise along the axis of Cable laid in Trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed. |
| 157 | Supply & fixing of Tubes, 'light grade' galvanised 50mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors to run cables through them for its protection including all the accessories required, complete as directed and specififed. |
| 158 | Taking down carefully MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. Please Enable Macros to View BoQ information |
| 159 | Taking down carefully MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender