Tender For Construction Of Teachers Quarter At Higher Secondary School Baduaab Gurez
Tender Value
98.63 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
2 days left
EMD
1.97 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bandipora → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Teachers Quarter At Higher Secondary School Baduaab Gurez
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of Soil. |
| 2 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages and lifts, loading un-loading and stacking etc complete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size). |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 7 | Supply and filling in plinth with RBM / GSB under floors incld. Carriage,watering, raming, consolidating and dressing complete. |
| 8 | Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:4 (1 cement, 4 coarse sand). |
| 9 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 11 | Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (Thermo-mechanically treated bars). |
| 12 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Kiln seasoned and chemically treated hollock wood. |
| 13 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second class kail wood 35mm. |
| 14 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood(35mm). |
| 15 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.4 mm thick glass pane (weighing not less than 10 kg/sqm). |
| 16 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked.MDF board 12 mm thick. |
| 17 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 19 | 12mm Cement plaster of mix: 1: 4 ( 1 cement : 4 fine sand). |
| 20 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. : 50 mm thick with 20mm nominal size stone aggregate. |
| 21 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick. |
| 22 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 23 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer. |
| 24 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 25 | Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work. |
| 27 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. |
| 28 | Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 29 | Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms. |
| 30 | Centering and shuttering including strutting, propping etc. and removal of form for: Stairs (excluding landings) except spiral staircases. |
| 31 | Centering and shuttering including strutting, propping etc. and removal of form for:Edges of slabs and breaks in floors and walls. |
| 32 | Providing and fixing wardrobe in walls 600mm deep with plywood ,incl. teak wood,sunmica and all necessary items/accessories incl. hinges, handle , lock complete job. |
| 33 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 34 | Construction of Hamam with Devri Stones including false flooring stones, making pillars in brick masonry in lime surkhi, supply and spreading of sand for heating of Hamam, construction of fire pot including iron gate and providing and fixing of exhaust/ hume (hamam) pipes including cost and carriage of all materials involved and including pointing and testing, complete job. |
| 35 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.welded. |
| 36 | Providing Hi-Rib roofing sheet including vertical/ curved surface fixed with polymer coated J or L hooks or screws with bitumen and G.I limpet washers 0.50 mm including all taxes and carriages complete job as approved by E.I.C. |
| 37 | Providing and fixing 600mm wide Hi rib powder coated ridges or hips 0.50mm thick including c/o self driven screws635mm long including all taxes and carriages complete job. |
| 38 | P/F 12mm thick T&G planks made of imported wood for roof soffits and ceilings including cost of necessary screws / nails/ adhesive all complete as approved by E.I.C. |
| 39 | Providing and fixing plained eaves boarding.300x40 mm (nominal size) 2nd class kail wood. |
| 40 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter. |
| 41 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 42 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 43 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 44 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 45 | Providing and fixing toilet paper holder. C.P. brass. |
| 46 | Providing and fixing health faucet with concealed fitting arrangement of approved quality and make. |
| 47 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931. |
| 48 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 49 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia |
| 50 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931. |
| 51 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 52 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 53 | Providing and fixing PTMT grating of approved quality and colour.150 mm nominal size square 100 mm diameter of the inner hinged round grating. |
| 54 | Providing and fixing floor traps including all fittings required complete job. |
| 55 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 250mm. |
| 56 | Providing and fixing PVC soil, waste and vent pipes:Prince type B. 75mm dia |
| 57 | 100 mm dia. |
| 58 | PVC Floor trap 100mm. |
| 59 | PVC Door T 100mm. |
| 60 | PVC Collar 100mm. |
| 61 | PVC collar 75mm. |
| 62 | PVC waste pipe. |
| 63 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe, 16mm OD(SDR-7.4). |
| 64 | PN-16 pipe , 20mm OD(SDR-7.4). |
| 65 | PN-16 pipe , 25mm OD(SDR-7.4). |
| 66 | PN-16 pipe , 32mm OD(SDR-7.4). |
| 67 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 15mm nominal bore. |
| 68 | 20mm nominal bore. |
| 69 | 25 mm nominal bore |
| 70 | 32 mm nominal bore |
| 71 | Providing and fixing uplasticized PVC connection pipe with brass unions. 15mm nominal bore |
| 72 | 20mm nominal bore |
| 73 | 25 mm nominal bore |
| 74 | Supply installation testing and comissioning of water heaters (Geysers) 50 litre capacity ISI marked as approves by E.I.C. |
| 75 | Supply , installation , testing and commissioning of water storage heaters(Geysers) 15 litre capacity ISI marked as approved y E.I.C |
| 76 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 100x10 mm. |
| 77 | Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete. |
| 78 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : 250*16*5 mm. |
| 79 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc complete. |
| 80 | Providing and fixing bright finished brass handles with screws etc. complete : 125 mm. |
| 81 | Supply and installation of satin finish stainless steel 304 grade stainlesssteel handrail and balustrade system having 50mm dia tube handrail (1.5mm gauge) weight 3.70 kg, erected with chemical grout to be fixed on the top (Spigot Fixed) posts shall be at max c/c distance of 600mm complete with all necessary bends and terminations complete, with cover plate, fixings, end terminations,custom bends, as manufactured by Dline or approved equivalent. Height shall be 1050 mm above the finished skirting level complete as per architectural drawing |
| 82 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. |
| 83 | Providing and fixing brass curtain rods of wall thickness 1.25 mmwith two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete : 25 mm diameter. |
| 84 | Supply & fixing of Curtains for windows of approved cloth, Color, Quality, size ,make (As directed by Engineer In Charge), including all carriages involved. |
| 85 | Providing and fixing of readymade wooden panelling t&g imported inclusive of polish, framework with 12mm ply incl. cornice 3\\" , as directed by Engineer in charge. complete job. |
| 86 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels : (Raj Nagar plain white marble/Udaipur green marble/zebra black marble) : (Area of slab over 0.5 sqm) 16mm. |
| 87 | Septic tankEarth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of Soils |
| 88 | Providing and laying stone Soling including Carriage upto the site of work Complete job. |
| 89 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 90 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 91 | Centering and shuttering including strutting, propping etc. and removal of form work for . Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc |
| 92 | Suspended floors, roofs, landings, balconies and access platforms. |
| 93 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 94 | Provision for supply and laying of manhole cover light duty. |
| 95 | SoakpitEarth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of Soils. |
| 96 | Dry random rubble masonry with hard stone in foundation and plinth: without Bond stone. |
| 97 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 98 | Centering and shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies and access platforms. |
| 99 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 100 | Provision for supply and laying of manhole cover light duty. |
| 101 | CarriageCarriage og Material by MT incl. Loading,unloading and stacking complete job.Cement/Steel avg.lead for 130km. |
| 102 | Sand/Agg.20mm nominal size. Avg.lead for 160km. |
| 103 | Aggregate 40mm nominal size. Avg.lead for 160km. |
| 104 | Bricks Avg.lead for 200km. |
| 105 | ElectrificationWiring for light point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Finolex/ Anchor/eq. standard make as desired by engineer incharge) single core cable in surface / recessed medium class PVC conduit, with modular switch ( Legrand Mylinc /SSK NV/Schneider Livia /ABB Tvisha make), modular plate, suitable GI box,and earthing the point with 1.5sqmm.FRLS insulated copper conductor single core cable etc.as required. |
| 106 | Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire , FRLS PVC insulated copper conductor ( Havell/Polycab/ Finolex/Anchor/ equivalent as directed by engineer incharge), single core cable in surface/recessed medium class PVC conduit. |
| 107 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A, 15/16 A modular socket outlet and 15/16 A modular switch, modular plate, suitable GI box , connections etc. as required. Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/Schneider Levia Crabtree athena make). |
| 108 | Wiring for lighting circuits/ inverter circuits/ 6- 10 amp power plug with 2X2.5 sq. mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Finolex/Anchor/ equivalent as directed by engineer incharge ), single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 109 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/Schneider Livia /ABB Tvisha make.) |
| 110 | Wiring for circuit/ Sub main Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor, Conduit (Havells/Polveab/Eq.Make) singlr core Cable in surface/Recessed medium class PVC conduit as required..2x2.5 sq.mm+ 1x2.5 sq.mm earth wire. |
| 111 | 2x16 sq.mm+ 1x6 sq.mm earth wire(submain). |
| 112 | Supply installation testing and commissioning of 18 W LED surface /recess , square or round mounded light luminary fitting shape with minimum system lumen efficiency of 100 lm/Wwith pressure Die cast almunium heat sink and P.F.>0.95.THD<10.CCT 5700K. CRI 80 the LED with useful life of 50000 Hrs at L70…the input voltage range shall be 150 V to 270 V . the fixture should have in built storage protection of 2KV.certification LM79 &LM80 test report should be from govt approved in house NABL lab government of india .The job includes AMC treckoned from date of successful commissioning of lighting fixtures for a period of two years which includes replacement of fixtures of Philps /Helonix/Havell/Wipro make (sample to be approved before installation). |
| 113 | Supply installation testing and commissioning of mirror light of standard make. |
| 114 | S F testing and comm. Of MCBs (10K) of the below mentioned capacities in sub mam controls legrand C curve schimder L&T equivalent make as directed by engineer incharge. A)6-32 Amp SP MCB |
| 115 | B)32 amp DP MCB |
| 116 | C)40-63 amp DP MCB |
| 117 | Supply installation testing and comm. Of 200-250mm sweep exhaust fan steel body of havell / Bajaj/ Crompton / equivalent make as directed by engineer in charge including making of space in wall/window as per site requirements and necessary connections. |
| 118 | Supplying and fixing following way single pole and neutral , sheet MCB distribution board (legrand Shinder ABB make) 240 V on surface recess complete with finned copper bus bar ,neutral bus , bar earth bar , din bar ,interconnections powder painted including esrthing etc as required but without MCB RCCB isolater.16 way Double door. |
| 119 | Supply fixing testing and comm. Of backlite holder button holder angle holder ceiling rose SSk anchor make incl.PVC block |
| 120 | Providing of Chemical earthing as per 15 standards by way of digging 10' deep pit then embedding 3 meter G.1 Earthing electrode, 80mm dia connecting the plate with main control board floor panels by 10 SWG copper wire with 1 2\\" dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical compound. |
| 121 | Design. Fabrication. Supplying. lustallation. Testing and Commissionmg of following panel, duly manatactured trom PRI approved manuticturer. made out of 2mm thick M.S. sheet, foor wall mounted, vermin and dust proof, mdoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing ot following switch gears.. Aluminium Bus Bar of various ratings atter taking Derating factor into account, and other allied accessories etc. as requireda As per approved design.size may vary as per site |
| 122 | Providing and fixing of following protection equpments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable meluding earthing etc as required. Normal INCOMING: 125 amp DP MCCB 25 KA including spreader links. (Adjustable thermal Adjustabie magnetic release Legrand and Shinider L&T ABB make. |
| 123 | 2 No of Aluminium Bus Bar of 200 Amp |
| 124 | Digital meters and phase indicators -1 set |
| 125 | OUTGOING: 63 amp DP MCB 10 KA Legrand/ Shinider ABB/L&T sample to be approved before installation. |
| 126 | space for 8 way MCB's |
| 127 | Supply laying testing and commissioning of PVC alluminium armoured cable 650 V1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments. Havell Eq. standard make as directed by engineer incharge and making end termination 35 sq.mm 2 core. |
| 128 | Supply installation testing and comm. of flood light 50 W (warm, white ). Ероху powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management. sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1. IP66, IK 07.. with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC.lower THD. toughned glass and secondary lens, Open Circuit Protection, Over Voltage Protection. Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per 15 15885 Part-2 Sec 13. IEC60598-1. Preferred make: Philips Havell Wipro make the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender