Tender For R.I.Office At Hatioto Building.
Tender Value
4.21 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
2 days left
EMD
4210
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For R.I.Office At Hatioto Building.
BOQ
| Sl. No. | Item Description |
| 1 | Removing old lime or cement plster from walls including raking out joints 12mm deep and removing debris within 50mm lead including cost all materials, all taxes, labour, T&P euding cost of glass etc complete in all respect as per the direction of Engineer-in-Charge. |
| 2 | 16mm (5/8\\") thick cement plaster (1:6) finished smooth to inside surface of bricks walls/ stone masonary after racking out joints including watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalities, additional charges, DMF 10% & EMF 5% over royalty etc completed in all respect in all floors as per direction of the Engineer-in-Charge |
| 3 | Dismentaling and removing 2.5 cm thick artificial stone flooring including stacking the useful materials for reuse and removing the debries within 50 meters lead. |
| 4 | Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials labour, Cess, Royalities, Additional charges, DMF @ 10% & EMF @ 5% over the royality and T&P and cess etc, required for the work etc, complete in all respect as per specification and direction of Engineer-in-charge. |
| 5 | Supplying,fitting & fixing antiskid vetrified tile in dadoos of size 300mm x 1200mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm & filling joints with epoxy grout of approved quality including cost of all materials labour, Cess, Royalities, Additional charges, DMF @ 10% & EMF @ 5% over the royality and T&P and cess etc, required for the work etc, complete in all respect as per specification and direction of Engineer-in-charge. |
| 6 | M.S. Panelled Door single leaved shutter with M.S. Frame. Overall size including frame 1830mm Height x 910mm Width made out of the following materials conforming to relevant ISS Frame:- 30x30x5mm M.S. Angle Shutter style:- Top & Bottom rail 25x25x3mm M.S. Angle. Door panel :- 1.0mm C.R. Sheet. Panel stiffener covering width of leaf :- 19x5mm M.S. Flat 3 nos. Hinges size:- 100mm - 3 nos. bought out as per ISS. Hold fast:- 30x30x5mm M.S. angle 150 mm length bifurcated at the tip 3 nos. on each side Handle:- 19x5mm M.S. Flat fabricated - 2 nos. Aldrop:- 2 nos. bought out as per ISS. Tower bolt : 2 nos. bought out as per ISS as per direction of the Engineer-in-charge. Approximate weight:- 36.5 kg. |
| 7 | Labour for fitting & fixing doors as per approved design including cost of all materials complete as per direction of the Engineer-in-charge. |
| 8 | Painting 2 coat with any approved synthetic enamel paint over a coat of primer with brush to wood/iron work including cost, conveyance, taxes of all materials required for the work with all labour, T&P, Cess etc complete in all respect as per specification and direction of Engineer-in-Charge |
| 9 | Wall painting two coats with plastic Emulsion paint of approved quality & shade on new work to give an even shade with brush to interior walls surface after cleaning the surface including cost of plastic emulsion paint with cost, conveyance and taxes of all materials and labour with T&P required for the work with CESS etc complete as per direction of Engineer-in-Charge. |
| 10 | Finishing wall surface with two coats of approved quality of weather coat of approved shade over a coat of primer including cost,conveyance, royalities, taxes, cess of all materials, labour, T&P etc.Complete as per direction of Engineer-in-Charge |
| 11 | Earth work in excavation of foundation in all kinds of soil with initial lead and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour, cess and T&P and dewatering if required for the work etc. Complete as directed by the Engineer-in charge |
| 12 | Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, Additional charges, DMF @ 10% & EMF @ 5% over the royality, Cess & taxes of all materials & cost of all labour & T&P required for the work etc complete as per specification & direction of Engineer-in Charge. |
| 13 | Providing cement concerete (1:3:6) nominal mix using 12mm size crusher broken hard granite chips of approved quality obtained from approved quarry including lowering, hoisting & laying in layers not exceeding 150 mm thick each compaction with vibrator, watering and curing for 28 days, centering, shuttering, dewatering if necessary and finishing the exposed surface smooth providing groves and beads where necessary including cost, conveyance royalty, DMF (10% over Royality), EMF (5% over Royality), Addl Charges Cess & other taxes of all materials, labour hire charges of all T&P machineries required for the work complete in all respect as per specification and direction of EIC. |
| 14 | Providing cement concerete (1:2:4) nominal mix using 12mm size crusher broken hard granite chips of approved quality obtained from approved quarry including lowering, hoisting & laying in layers not exceeding 150 mm thick each compaction with vibrator, watering and curing for 28 days, centering, shuttering, dewatering if necessary and finishing the exposed surface smooth providing groves and beads where necessary including cost, conveyance royalty, DMF (10% over Royality), EMF (5% over Royality), Addl Charges Cess & other taxes of all materials, labour hire charges of all T&P machineries required for the work complete in all respect as per specification and direction of EIC. |
| 15 | Flyash brick masonary in cement mortar (1:6) in foundation and plinth and basements and cemental floor bed plinth molding and similar such types of works with all necessary projections using flyash bricks of (25 cm x 12 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, royalty, additional charges, DMF 10% & EMF 5% over royalty cess with T&P required for the work with all taxes and royalties etc. with all T&P complete in all respect as per direction of the Engineer in charge. (Foundation) |
| 16 | Ground Floor |
| 17 | Providing cement concerete (1:1.5:3) nominal mix using 12mm size crusher broken hard granite chips of approved quality obtained from approved quarry including lowering, hoisting & laying in layers not exceeding 150 mm thick each compaction with vibrator, watering and curing for 28 days, centering, shuttering, dewatering if necessary and finishing the exposed surface smooth providing groves and beads where necessary including cost, conveyance royalty, DMF (10% over Royality), EMF (5% over Royality), Addl Charges Cess & other taxes of all materials, labour hire charges of all T&P machineries required for the work complete in all respect as per specification and direction of EIC. |
| 18 | 12mm thick cement plaster (1:6) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalties, additional charges, DMF 10% & EMF 5% over royalty, etc. complete in all respect in all floors as per direction of the Engineer in charge. |
| 19 | 16mm (5/8\\") thick cement plaster (1:6) finished smooth to inside surface of bricks walls/ stone masonary after racking out joints including watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalities, additional charges, DMF 10% & EMF 5% over royalty etc completed in all respect in all floors as per direction of the Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender