Tender For Repair To Misc B/R Works In Otm Accn Of Coi, Sub Area Complex, Offrs Mess, Flag Staff House, Jcos Mess, Mes Ib Etc And Repair & Maintenance To Drain, Culvert, Footpath, Fencing, Boundary Wall Etc And Other Misc Connected B/R Works In Offrs
Tender Value
45 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
13 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Misc B/R Works In Otm Accn Of Coi, Sub Area Complex, Offrs Mess, Flag Staff House, Jcos Mess, Mes Ib Etc And Repair & Maintenance To Drain, Culvert, Footpath, Fencing, Boundary Wall Etc And Other Misc Connected B/R Works In Offrs Md Accn Pbors Md Accn, Jcos Md Accn, Old Butchery, Mes Colony, Old Coi, Pao Brc, Lao, Deo, Old Supply Depot Ar-Ea, 6 Diet, 5Pss Sec Under Age B/R-Ii Of Ge Danapur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying one coat of Oil Bound Distemper of any light shade complete all as specified and directed. |
| 2 | Sme as item No. 1.00 above but on ceiling surfaces. |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips, terrazo finish where ever existing etc all as specified and directed. |
| 4 | Dismantling of floor, hearth or walls tiles incl cement mortar bedding but not backing and rubbish off permises complete all as specified and directed. |
| 5 | Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed. |
| 6 | M&L for Treatment of soil under existing floors Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling hole, 300mm apart and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed. |
| 7 | Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors omplete all as specified and directed. |
| 8 | M&L for 10mm thick Light shade vitrified ceramic tiles in floors, area of each tile not exceeding 0.36 sqm over and including 15mm thick screed bed in cement mortor 1:6 set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed. |
| 9 | M&L for 10mm thick Light shade vitrified ceramic tiles, area of each tile not exceeding 0.36 sqm as in vertical surfaces such as skirtings, dados etc, over and including 10 mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed. |
| 10 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed. |
| 11 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed. |
| 12 | M&L for glazed ceramics coloured tiles of size (350x450x7) /350x250x7/300x450x7 mm thick in vertical surfaces such as skirting/dados/wall over and including 10mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed. |
| 13 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and as directed. |
| 14 | M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 15 | Same as item No. 14 above but except bricks. |
| 16 | M&L brick work with sub class ‘B’ bricks straight or curved on plan to any radius built in CM 1:4 in half brick thick wall complete all as specified and directed. |
| 17 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in fdn, sub base, mass concrete etc. complete all as specified and directed. |
| 18 | M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 grade and three part of sand ( all by weight) complete all as specified and directed. |
| 19 | M&L for RCC 1:1.5:3 type A1 (using 20 mm graded stone aggregate) as in kitchen platform, shelves, chajja, including necessary form work complete all as specified and directed. |
| 20 | Taking down cement plaster on wall/ceiling /roof etc including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed. |
| 21 | M&L 15 mm thick rendering on fair faces of brick /concrete surfaces of wall in cm (1:6), finished even and smooth (Without using extra cement ) complete all as specified and directed. |
| 22 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured & paid separately under respective item. |
| 23 | M&L Rendering 5mm thick in cement mortar 1:3 on concrete surface of ceiling and finishing the surface even and smooth complete all as specified and directed. |
| 24 | M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed. |
| 25 | M&L for applying two coats of oil bound distemper on wall over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 26 | M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and directed. |
| 27 | Same as item No 26 above but on ceiling surfaces complete all as specified and directed. |
| 28 | M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 29 | M & L preparation of new surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm and including priming coat of primer applied @ 0.90 litre/ 10 sqm at all heights complete all as specfied and diretced. |
| 30 | M & L complete removal of existing surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm including priming coat of primer applied @ 0.90 litre/ 10 sqm at all heights complete all as specfied and diretced. |
| 31 | M&L for complete removal of existing surface & Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade as New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 32 | M&L for prepartion of new surface & Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade in New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 33 | M&L Preparing old painted surfaces of walls, chajjas etc by washing, rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed. |
| 34 | M&L for applying 2mm thick Birla / JK Putty on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 35 | Supply only water proofing compound (liquid),ISI marked complete all as specified and directed. |
| 36 | Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. |
| 37 | Same as above item No 36 but exc 1.5 Sqm and n.exc. 4 Sqm each. |
| 38 | Taking down shutters of any description exc 1.00 Sqm and n exc 2 Sqm each complete all as specified and directed. |
| 39 | M&L for cutting holes in brick wall built in cement mortar for inserting holdfast , walls exc half brick n.exc one brick thick and making good dismantled portion in cement mortar 1:3 complete all as specified and directed. |
| 40 | S & F 30 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) divided into squares, with plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkats for door etc complete complete all as specified and directed. |
| 41 | S & F of 35 mm thick 2nd class hardwood factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated complete all as specified and directed. |
| 42 | S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed. |
| 43 | S&F steel windows with side hung shutters including hinges with MS handles and tower bolts pegstay, hold fast complete with glazing & wire gauzed bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and directed. |
| 44 | S&F steel windows with side hung shutters including hinges with MS handles and tower bolts hold fast complete without glazing bar & wire gauzed bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and directed. |
| 45 | S&F steel ventilators with top hung shutters including hinges, steel peg stay hold fast including taking down existing ventilators complete all as specified and directed. |
| 46 | S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 complete all as specified and directed. |
| 47 | S & F pressed steel frame of size 105 mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in back filling complete all as specified and directed. |
| 48 | S & F pressed steel frame of size 125 mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in back filling complete all as specified and directed. |
| 49 | S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 50 | S & F solid PVC door frame of size 75 mm x 50 mm made out of choice colour PVC with wood grain solid complete all as specified and directed. |
| 51 | S&F Factory Made Solid PVC Moulded Door Shutter, & kitchen cupboard shutters with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and directed. |
| 52 | S & F 100 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed. |
| 53 | S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed. |
| 54 | S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed. |
| 55 | S&F 200mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 56 | S&F 100mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 57 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified. |
| 58 | S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 59 | S & F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor complete all as specified and directed. |
| 60 | S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified and directed. |
| 61 | S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified and directed. |
| 62 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames / steel frames glazed with oil putty or fixed with beads complete all as specified and directed. |
| 63 | S& F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed. |
| 64 | S& F 5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and directed. |
| 65 | S & F 3 mm thick figured glass pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed. |
| 66 | S&F in repair 18/19 mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves complete all as specified and directed. |
| 67 | S&F in repairs continuous (Piano) hinges 40 mm width of flaps, mild steel, bright finish or electro galvanised complete all as specified and directed. |
| 68 | S&F in repair 40 mm dia cup board knobs, fixed with nut, screw and washer of mild steel bright finish complete all as specified and directed. |
| 69 | S&F of ball catches with 8 mm dia steel ball and brass body and striking plate including letting complete all as specified and directed. |
| 70 | M & L for 2nd class Hard wood as in plain fillets, square, rectangular, traingular in section clean sawn secured with nails or brads of sectional area exc 13 & not exc 25 Sqcm complete all as specified and directed. |
| 71 | S&F in repair 2 lever aluminium cupboard lock grade-I size 100 mm etc complete all as specified and directed. |
| 72 | S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 73 | S&F 100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as specified and directed. |
| 74 | S&F in repair anodised aluminium alloy 20 mm dia curatain rod including brackets as approved complete all as specified and directed. |
| 75 | S&F 5.5mm thick looking mirror selected quality glass n.exc 0.50 Sqm each and fixed to wall with brass screws, cup and washers including polishing, rounded off edges of glass and drilling holes in glass complete all as specifed and directed. |
| 76 | Taking up or down steel tubing and connections 15 mm dia complete all as specified and directed. |
| 77 | Taking up or down steel tubing and connections, of 20 mm dia complete all as specified and directed. |
| 78 | S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia complete all as specified and directed. |
| 79 | S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm dia complete all as specified and directed. |
| 80 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 81 | S&F aluminium partition wall with following specificaiton complete all as specified (a) Member with Single side groove of size 63.50 x 38.10 x 1.95 [email protected] Kg/RM(b) Member with Both side groove of size 63.50 x 38.10 x 1.95 [email protected] Kg/RM(c) Partialy 5mm thick Aluminium Composite Seat decorative(d Partialy 5 mm thick tinted glass.(e) Aluminium and PVC beading as per requirement as in fixing for particle board and glass.(f) Size of Pannel should not be greater than (1.2m x1.2m) |
| 82 | S & F in repair aluminium door shutter with following specification:-(a) chowkhat frame of size 63.50x38.10x1.95mm thick weight @ 1.092Kg/RM.(b) Style/Vertical member of size 47.62 x 44.45 x 2.02 mm thick weight @ 1.052Kg/RM(c) Top member of size 47.62 x 44.45 x 2.02 mm thick weight @ 0.974(d) Bottem member of size [email protected]/m(e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket.(f) Bottom panel with 5 to 6 mm thick Alumnium composite panel thick with clips(g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No, Hinges 04 Nos each shutter.(h) Aluminum and PVC beading as per requirment as in fixing for ACP shhet & Glass, jointing cleat including locking arrangement. etc. |
| 83 | S & F in repair aluminium window sliding shutter three track with following specification:-(a) chowkhat frame bottem member of size 92x31.75x1.50mm @ 1.248Kg/RM.(b) chowkhat frame Top & side members sides and member of size 92x31.75x1.50mm @ 1.060Kg/RM.(c) Shutter sides members of size [email protected]/RM(d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment.(e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket.(f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc |
| 84 | Easing of Aluminium window of glazed & gauzed shutters including small fittings if required and make it functional complete all as specified and directed. |
| 85 | Easing of Aluminium Door of glazed shutters including small fittingsg if required and make it functional complete all as specified and directed. |
| 86 | S & F in repair Vitreous china wash down water closet pan (pedestal pattern ) Rimless Bowl With Cistern For Coupled WC With UF Soft Close Slim Seat Cover, Hinges, Conversion Bend, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 670 x 355 x 755 mm S Trap- 110 mm (With Conversion Bend) complete all as specified and directed. Make :Cera Cat. No. S1013233 or equivalent in Hindware/ Jaquar as by GE |
| 87 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 88 | M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :-(i)Taking down APP roofing sheet/Terrazo/Tiles of any description incl mud/cement plaster etc and cleaning the top surface, washing down etc. Prepared to receive water proofing treatment , incl filing of cracks, groves etc in neat cement slurry complete all as spd. (ii) Properly cleaning and drying concrete surfaces.(iii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm.(iv) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm.(v) Laying unrolled over the bitumen coated surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction.(vi) Applying a coat of bituminous aluminium paint @ 100 gm / Sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / Sqm duly sanded over polymeric membrane complete. |
| 89 | S & F in repair 15 mm dia Central hole basin mixture with 450mm braided connection pipe (without pope up) Quarter Turn including all necessary fittings as approved complete all as specified and directed. Make - Cera Series VICTOR Cat Part No-F1015454 or equivalent in Jaquar as approved by GE. |
| 90 | S & F in repair 15 mm dia sink mixture (Wall Mounted) with 190 mm long swivel spout connection legs and wall flanges all necessary fittings as approved complete all as specified and directed. Make - Cera Series VICTOR Cat Part No-F1015501 or equivalent in Jaquar as approved by GE |
| 91 | S&F in repair chromium plated wall mixer with \\"L\\" Bend pipe for overhead shower with wall flange complete all as specified and directed. Make - Cera Series VICTOR Cat Part No-F1015401 or equivalent in Jaquar as approved by GE |
| 92 | S&F in repair bib tap 15 mm with wall flange and aerato for iron pipe or for brass ferrule fixed to iron pipe etc. complete all as specified and directed. Make - Cera Series VICTOR Cat Part No-F1015151 or equivalent in Jaquar as approved by GE. |
| 93 | S&F in repair pillar cock with swan neck spout left and aerator tap 15 mm bore fancy type chromium plated, screwed for iron pipe complete all as specified.Make - Cera Series VICTOR Cat Part No-F1015154 or equivalent in Jaquar as approved by GE |
| 94 | S&F in repair angle cock 15 mm with wall flange screwed for iron pipe complete all as specified and directed.Make - Cera Series VICTOR Cat Part No-F1015201 or equivalent in Jaquar as approved by GE |
| 95 | S&F in repair two way angle cock with side handle 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. Make - Cera Series VICTOR Cat Part No-F015211 or equivalent in Jaquar as approved by GE |
| 96 | S & F in repair chromium plated corner glass shelf of size 150 x 150 mm with brackets complete all as specified and directed.Make - Cera Series VICTOR Cat Part No-F015361 or equivalent in Jaquar as approved by GE. |
| 97 | S&F rubber gasket for door sealing complete all as specified and directed. |
| 98 | Easing of steel window of glazed & gauzed shutters including small fittings oiling, greasing and welding if required and make it functional complete all as specified and directed. |
| 99 | Easing of wooden door/ window shutter (Panelled or skelton) and make it functional complete all as specified and directed. |
| 100 | S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 914 x 786 x 254 mm size fixing with wooden plug with suitable size of screws complete all as specified and directed.Make :Prayag PSP-21 or or Equivalent in Parryware/Hindware as approved by GE. |
| 101 | S&F in repair vitreous china WHB size450x350x195 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets painted with two coats of synthetic enamel painting over a coat of red oxide primer etcc omplete all as specified and directed.Make-Cera CANON Cat. No. S2040102 or equivalent in Hindware/Jaquar as approved by GE. |
| 102 | S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall , complete all as specified and directed.Make-Parryware SINGLE FLUSH E8333 or equivalent in Cera/Hindware as approved by GE. |
| 103 | S&F in repair ABS health faucet withHealth Faucet ABS body with wall hook and 1 metre chrome plated PVC hose pipe 1.0 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and directed.Make - Cera Series DRIBBLE Cat Part No-F8030103 or equivalent in Hindware/Jaquar as approved by GE. |
| 104 | S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 105 | S&F in repair vitreous china squatting pan, Orissa pattern of size 580 x 440 mm white, with integral foot rest, 'P' or 'S' trap including connection to trap, and to flush pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and directed. |
| 106 | S&F in repairs PVC connection 15 mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and directed. |
| 107 | S&F in repair 5 mm thick looking mirror 600 x 450 mm selected quality glass mounted on 6 mm thick commercial plywood, with aluminium beading and fixed to wall with brass screws, cups and washers complete as specified and directed. |
| 108 | S&F in repair brass CP steel tubular towel rail 20 mm dia \\"D\\" type 60 cm long between flange aluminium anodised complete all as specified and directed. |
| 109 | S&F in repair Stainless steel soap dish of size 300 x 150 mm etc fixed to wall with screw complete all as specified and directed. |
| 110 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed. |
| 111 | S&F in repair brass chromium plated overhead shower rose swivel type125 mm with CP arms 300 mm long complete all as specified and directed. |
| 112 | S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and directed. |
| 113 | S & F in reapir chromium plated toilet paper holder with flap complete all as specified and directed. |
| 114 | M&L for 18-20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 115 | S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips. |
| 116 | Taking down PVC/AC pipes upto 110mm bore(including all fittings) with spigot & socket encls & lead joints incl burning out joints complete all as specified and directed. |
| 117 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors/ trenches complete all as specified and directed. |
| 118 | S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 119 | S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed. |
| 120 | M & L PVC(SWR) bend of 110 mm dia of any radius etc complete all as specified and directed. |
| 121 | M & L PVC(SWR) Tee of 110 mm dia etc complete all as specified and directed. |
| 122 | S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed. |
| 123 | S&F in repair CP/PTMT grating with or without waste hole 100 mm size (ISI Marked) complete all as specified and directed. |
| 124 | Dismantling water tanks of capacity exc 250 and n exc 500 ltrs complete all as specified and directed. |
| 125 | Dismantling water tanks of capacity exc 500 and n exc 1000 ltrs complete all as specified and directed. |
| 126 | S&F 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 127 | Same as item No. 126.00 above but 1000 Ltrs capacity. |
| 128 | S&F 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball srewed for iron pipe and fixed (minium weight 20mm-210) gms complete all as specified and directed. |
| 129 | S & F in repair 20 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 130 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 131 | M & L preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat red oxide primer complete all as specified and directed. |
| 132 | M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 133 | M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 134 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 135 | S&F in repair Door closer hydraulically regulated cast iron body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 136 | Cleaning, removing all scale, dust, dirt and elgy using wire/jute brush from inside of RCC/PVC tanks and connected pipe removing to a distance of not less than 250mtrs, washing the tank/pipe with bleaching power solution and finally applying 2% potassium permangnate solution for disinfection, including marking with black paint on white base on tank as \\"Tank cleaned on ____ (Date)_____\\" of Capacity 500 Ltrs complete all as specified and directed. |
| 137 | Same as item No 136 above but of capacity 1000 litres. |
| 138 | M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) in roof padding/kerbs/sunken slab etc complete all as specified and directed. |
| 139 | M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete all as specified and directed |
| 140 | Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and directed. |
| 141 | S & F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed. |
| 142 | S & F for hangers 6 mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40X30 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 143 | M & L for 8 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and directed. |
| 144 | M&L PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 145 | M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed. |
| 146 | Dismantling structural steel work including doors, gates but excluding framed truss etcc omplete all as specified and as directed. |
| 147 | S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410W Grade E 250 complete all as specified and as directed. |
| 148 | Dismantaling of Asbestos cement/GI (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 149 | Demolition of reinforcement cement Concrete of any description and in any position not otherwise specifically provided for columns, beams, lintels etc complete all as specified and directed. |
| 150 | M & L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 151 | M&L plain cement concrete nominal mix 1:3:6 type C-1 using 20mm graded stone aggreagate as in surface channel drain including neccssary form work as required complete all as specified directed. |
| 152 | M&L Reinforced cement concrete nominal mix 1:2:4 type B-1 using 20mm graded stone aggreagate as in slab supported on wall, bem in coloumn in floor landing, balconies canopies deck slab and in shelves complete all as specified as directed. |
| 153 | Form work to soffits of slab such as roof slab, floor slab, landing shelves similar work etc rough finished surface of cocrete complete all as specified and directed. |
| 154 | M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete. |
| 155 | Dismantling of tiles/stone slabs of any description or thickness, laid dry or laid dry and pointed in floors, aprons etc |
| 156 | M&L Pre-cast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in kerb stone block set in cement mortar 1:6,complete all as specified and directed. |
| 157 | M&L for Chequered cement concrete tiles (in any shade) 30cmx30cmx25mm thick, set, jointed and pointed with grey cement and pigment in floors over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 158 | M&L 15 mm thick rendering on fair faces of bricks work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed. |
| 159 | M&L 15 mm thick rendering on other than fair faces of bricks work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed. |
| 160 | M&L Preparing old painted surfaces of walls, pillars etc by washing rubbing down and stopping and applying one coat of cement base paint white or tinted complete all as specified as directed. |
| 161 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 162 | S&F framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete incl pintel hinges, stops hand made sliding bolts etc conforming to Fe 410-W (Gde-E-250) quality-A, |
| 163 | Dismantling posts or struts (wood or steel or RCC) any section including taking out embedded portion and making good disturbed ground surfaces complete all as specified and directed. |
| 164 | Dismantling of fencing wire mesh any type |
| 165 | Excavation in post holes (or similar holes each n exc 0.5 cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 mtr and making good surface in soft/loose soil. |
| 166 | S&F MS angle Iron as in fencing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc conforming to Fe 410-O or Fe 310-O complete all as specified and directed. |
| 167 | S&F MS work conforming to Fe 310-O as in FI fillets for securing chain link fencing, angle iron horns, posts, etc cut to length bent to shape with necessary cuts, drilling holes etc complete all as specified and directed. |
| 168 | Supply only chain link fencing of MS GI wire mesh, 4mm dia of GI wire and mesh 75x75 mm up to into mattresses or cages lapped wired incl. staple etc complete all as specified and directed. |
| 169 | Fixing only chain link fencing of any mesh size/any type incl. link wire to any type of standard rails/supports etc & straining bolt etc incl. provision of binding wire complete all as specified and directed. |
| 170 | Supply only ms round bar 10mm dia conforming to Fe 290 Gde E-165 as line wire for chain link fencing. Note : Cutting to length, bent to shape required including binding with MS wire is included in this item. |
| 171 | S&F in repair mild steel, screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exc 5cm but not exceeding 10cm long and dia of shank 05 to 10mm all as specified and directed. |
| 172 | S&F in repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or typing at crossing with and provision of galvanised MS wire stapples or steel pins etc as directed (each line wire to be measured). |
| 173 | M&L 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, park, lawn, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and inlcuding 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using p[late vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 174 | M&L 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, park, lawn, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and inlcuding 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using p[late vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender