Tender For Construction Of Hatching Pool/Hatchery For Genome Editing Research At Icar-Cifa, Kausalyaganga, Bhubaneswar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Jul 2026
0 days left
EMD
1.19 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Hatching Pool/Hatchery For Genome Editing Research At Icar-Cifa, Kausalyaganga, Bhubaneswar
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.(Item Code : 2.8.1) |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.(Item Code :2.27) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived fromnatural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)(Item Code : 4.1.8) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived fromnatural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)(Item Code : 4.1.3) |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)(Item Code : 5.2.2) |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).(Item Code : 5.3) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)(Item Code : 5.1.2) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.(Item code : 5.9.2) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform(Item code : 5.9.3) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.(Item code : 5.9.5) |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts(Item code : 5.9.6) |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Hot rolled deformed bars(Item Code : 5.22A.4) |
| 13 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in :Cement mortar 1:4 (1 cement : 4 coarse sand)(Item Code : 6.34.1) |
| 14 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate(Item Code : 11.3.1) |
| 15 | 20 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand)(Item Code :13.6.1) |
| 16 | 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand)(Item Code : 13.3.1) |
| 17 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster(Item Code : 13.9.2) |
| 18 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm overand including priming coat of exterior primer applied @ 0.90 litre/10 sqm)(Item Code : 13.47.1) |
| 19 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm(Item Code : 13.48.1) |
| 20 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(Item Code : 13.80) |
| 21 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread offlame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)30 mm thick ( Item Code : 26.88.1) |
| 22 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.50 mm nominal dia Pipes(Item Code : 18.9.6) |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.40 mm nominal dia Pipes(Item Code : 18.9.5) |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.25 mm nominal dia Pipes(Item Code : 18.9.3) |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.20 mm nominal dia Pipes(Item Code : 18.9.2) |
| 26 | Providing and fixing of 50mm dia CPVC Tee of reputed make ISI marked. (Supreeme/Prince/Oriplast) |
| 27 | Providing and fixing of 50mm dia CPVC elbow (90.) of reputed make ISI marked.(Supreeme/Prince/Oriplast) |
| 28 | Providing and fixing of 50mm dia CPVC socket of reputed ISI maked heavy duty. (Supreeme/Prince/ Oriplast) |
| 29 | Providing and fixing of 50mm dia CPVC elbow (45.)of reputed make ISI marked.(Supreeme/Prince/Oriplast) |
| 30 | Providing and fixing 50mm dia CPVC union of reputed make ISI marked. (Supreeme/Prince/Oriplast) |
| 31 | Providing and fixing of 40mm dia CPVC Tee of reputed make ISI marked. (Supreeme/Prince/Oriplast) |
| 32 | Providing and fixing of 40mm dia CPVC elbow (90.) of reputed make ISI marked. (Supreeme/Prince/Oriplast) |
| 33 | Providing and fixing of 40mm dia CPVC socket of reputed ISI maked heavy duty. (Supreeme/Prince/Oriplast) |
| 34 | Providing and fixing of 40mm dia CPVC elbow (45.)of reputed make ISI marked. (Supreeme/Prince/Oriplast) |
| 35 | Providing and fixing 40mm dia CPVC union of reputed make ISI marked. (Supreeme/Prince/Oriplast) |
| 36 | Providing and fixing of 40mm - 25 mm dia CPVC Tee of reputed make ISI marked. (Supreeme/Prince/Oriplast) |
| 37 | Providing and fixing of 25 mm dia CPVC Tee of reputed make ISI marked. (Supreeme/Prince/Oriplast) |
| 38 | Providing and fixing of 25mm dia CPVC elbow (90.) of reputed make ISI marked. (Supreeme/Prince/Oriplast) |
| 39 | Providing and fixing of 25mm dia CPVC socket of reputed ISI maked heavy duty. (Supreeme/Prince/ Oriplast) |
| 40 | Providing and fixing 25mm dia CPVC union of reputed make ISI marked. (Supreeme/Prince/Oriplast) |
| 41 | Providing and fixing of 25mm - 20 mm dia CPVC Tee of reputed make ISI marked. (Supreeme/Prince/Oriplast) |
| 42 | Providing and fixing 25mm dia stainless steel made duckmouth of reputed make ISI marked. (Supreeme /Prince/ Oriplast) |
| 43 | Providing and fixing of 50mm dia UPVC control valve (Heavy Duty) of reputed brand. (Supreeme/Prince/ Oriplast) with cutting of concerete, base, etc. |
| 44 | Providing and fixing of 40mm dia UPVC control valve (Heavy Duty) of reputed brand. (Supreeme/ Prince/ Oriplast) |
| 45 | Providing and fixing of 25 mm dia UPVC control valve (Heavy Duty) of reputed brand. (Supreeme/ Prince/ Oriplast) |
| 46 | Providing and fixing of 15 mm dia CP Shower of reputed brand. (Supreeme/Prince/Oriplast) |
| 47 | Supplying and fixing following way(6way), ingle pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 48 | Supplying and fixing of 6sq.mm service cable (2 core) with PVC guard wire as per requirement of the Institute. |
| 49 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. with dismantling of existing one with white washing as required.(Code:1.10.2) |
| 50 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 51 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes (2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire)of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 52 | Supplying and fixing of 32A DP MCB as required. |
| 53 | Supplying and fixing of 20A SP MCB as required. |
| 54 | Supplying and fixing of 10 A SP MCB as required. |
| 55 | Supplying and fixing of modular fan regulator as required. |
| 56 | supplying and fixing of Suitable sizeGI board with modular cover plate with 1nos. 15A ,modular Switch and 1nos. 15A modular Socket as per requirement of the Institute. |
| 57 | Supplying and fixing of 5A modular socket and 5A switch as required. |
| 58 | Supplying and fixing of 26W BLDC fan as per requirement of the Institute with dismantling of existing fan. |
| 59 | Supplying and fixing of 20W LED batten light as per requirement of the Institute. |
| 60 | Supplying and fixing of 45W street light with bracket,clamp as per requirement of the institute. |
| 61 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including GI wire accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.(Code:5.2) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender