Tender For Renovation Of Bio-Secured Ponds With Concrete Dyke And The Gravel Filled Disposal Tank For Genome Editing Research At Icar- Cifa, Kausalyaganga, Bhubaneswar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Jul 2026
15 days left
EMD
1.22 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Bio-Secured Ponds With Concrete Dyke And The Gravel Filled Disposal Tank For Genome Editing Research At Icar- Cifa, Kausalyaganga, Bhubaneswar
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of Soil(Item Code : 2.1.1) |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.(Item Code : 2.27) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived fromnatural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)(Item Code : 4.1.8) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) includingmanufactured sand derived from Recycled ConcreteAggregate (RCA) upto 25% : 3 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%).(Item Code : 4.1.2) |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. (Item Code: 2.8.1) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)(Item Code : 5.1.2) |
| 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)(Item Code : 5.2.2) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form forWalls (any thickness) including attached pilasters,butteresses, plinth and string courses etc.(Item Code : 5.9.2) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Hot rolled deformed bars(Item Code: 5.22A.4) |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). ( Item Code : 5.3) |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and accessplatform ( Item Code : 5.9.3) |
| 12 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster (Item Code : 13.9.2) |
| 13 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.(Item Code : 23.5) |
| 14 | Providing and fixing 160 mm dia UPVC pipe (6kg/cm2) under pond dyke (Minimum 0.6 m below from the top dyke of pond) including cutting of earth, concreting etc. and refilling the trenches with concreting the top (100mm thick) with cement mortar 1:2:4 ( 1 Cement: 2 coarse sand: 4 20mm size aggregate) all all complete as per the direction of EIC. |
| 15 | Supplying and spreading of earth over pond bed including earth excavation, tranportation (mechanical / manualy) with lift of 5.0 m and lead upto 3.0 km as perthe direction of EIC. The earth will be spread over pond bed uniformly upto a height of 0.6m from the buttom of the pond surface in waterly condition. |
| 16 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.All types of soil 350 mm dia.(Item code:23.1.1.2) |
| 17 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia. (Item code:23.3.3) |
| 18 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia. (item code:23.4.3) |
| 19 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.(Item code:23.5) |
| 20 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.(Item code:23.7) |
| 21 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc.,all as per requirement and direction of Engineer-in-charge.(item code:23.12) |
| 22 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia. (Item code:23.13.3) |
| 23 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp. (Item code.23.14.3) |
| 24 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).200 mm dia(Item code:23.15.3) |
| 25 | Providing and fixing 5HP submersible pump of approved brand (Crompton, Kirloskar, Havells etc. |
| 26 | Supplying and laying of PVC sheathed XLPE power cable 1.1 KV grade 3.5 core 35 mm2 armoured cable under ground including earth excavation,sand cushioning, protective cover and refiling of earth. |
| 27 | Providing and fixing electrical panel board of size 600mm x 600mm with 900mm height stand made up of 50 x 50 x 6mm angle with 63A insulator, starter, indicator and painted with high gloss enamel paint. |
| 28 | Supplying and fixing 3 core 4 m2 submersible flat cable as per the instruction. |
| 29 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.50 mm nominal dia Pipes. (Item code:18.9.8) |
| 30 | Providing and fixing of 50mm dia UPVC Tee of reputed make ISI marked. |
| 31 | Providing and fixing of 50mm dia UPVC elbow of reputed make ISI marked. |
| 32 | Providing and fixing of 50mm dia UPVC control valve reputed ISI maked heavy duty. |
| 33 | Providing and fixing of 50mm dia UPVC socket of reputed make ISI marked. |
| 34 | Providing and fixing 50mm dia UPVC union of reputed make ISI marked. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender