Tender For Renovation Of Front Facia Of Lifts Installed In Five Blocks At 106 Residential Flats, Shyam Lal, Begumpet, Hyderabad
Tender Value
14.19 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
6 days left
EMD
28380
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Front Facia Of Lifts Installed In Five Blocks At 106 Residential Flats, Shyam Lal, Begumpet, Hyderabad
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work of thickness of tiles 10 mm to 25 mm in floors including skirting and walls laid in cement mortar material within 50 metres lead as per the direction of the Engineer-in-charge. |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead as per specification and directions of Engineer-in- Charge |
| 3 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved |
| 4 | Brick work with common burnt clay FPS (Non- Modular) bricks of class designation 7.5 in superstructure above plinth level up to floor five level in all shape & size in cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | Cleaning of reinforcement Bars upto 12 mm diameter from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge |
| 6 | Structural steel work in single section, fixed with Chequred plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as directed by the Engineer-in-charge. |
| 7 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 8 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 9 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 10 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 11 | Providing, mixing and applying 12 mm average thickness SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).all complete as per the direction of Engineer-In-Charge. |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%) |
| 13 | Providing and fixing 18 mm thick gang saw cut Granite of Z Black/Ruby Red shade, mirror polished , machine cut for kitchen platforms, Wash basin counters, window sills, facias , Entrance of Lift and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, full edge moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 14 | Providing edge moulding to 18 mm thick marble stone counters/Granite, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 15 | Providing and injecting Epoxy injection grout in concrete/RCC work of approved make in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. |
| 16 | Providing and Fixing nomecalture of specified size floor number signage made with sunboard 5 mm thick in bilingual format hindi & English. Complete as the direction of EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender