Tender For Renovation Of Electrical Department.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Jul 2026
1 days left
EMD
93450
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Electrical Department.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Jul-2026 | Due date extension | Date | 17-Jul-2026 |
| 2 | 22-Jul-2026 | Due date extension 3 | Date | 29-Jul-2026 |
| 3 | 18-Jul-2026 | Due date extension 2 | Date | 21-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Part A :- Civil Works |
| 2 | Dismantling/ Removal of Old damaged wooden Partitions, existing doors (including frames) etc., from workshop and Handing over the servicable items to Civil Engineering dept., and dispose the un-servicable material to 50M lead complete all as directed by HSL |
| 3 | Demolishing of RR/ PCC/ RCC/ Brick wall in Cement mortar by manually / mechanical means including stacking of serviceable material & handing over of useful materials to scrapyard / YCM Civil R&M section and disposal of unserviceable materials with in a 100M lead etc., complete all as directed by EIC |
| 4 | Chipping and removal of existing PCC/RCC surface upto required depth manually/mechanically including cleaning and disposal of debris out of HSL premises as directed by EIC. |
| 5 | Excavation work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains in all kinds of soil, (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated earth soil and disposal of surplus excavated soil as directed,within a lead of 50 m. |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift. |
| 7 | Providing plain cement concrete 1:2:4 nominal mix by using 20 mm aggregate and baby chips including mixing, depositing in position, tampering, finishing, curing, Shuttering including all materials & labour etc., complete all as directed. (Item includes chipping of damaged concrete and dispose to a lead of 50M) |
| 8 | Providing and laying reinforced cement concrete work in nominal mix of 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III):3 graded stone aggregate 20mm nominal size), excluding the cost of centering, shuttering, finishing and reinforcement and including cost of cement (opc 53 Grade UltraTech, ACC, Nagarjuna & KCP) and all materials & men etc., complete. |
| 9 | Providing water proof MS / Wooden centering and shuttering including strutting, propping for Foundations, footings, bases for columns wherever specified etc., including removal of form work complete all as directed. |
| 10 | Supply and providing HYSD bar reinforcement of Fe-500 grade of approved make SAIL / RINL / TISCO including transportation, straightning, cutting, bending and binding with annealed binding wire of 18 gauge (1.22mm dia) complete all labour and material etc., complete all as directed |
| 11 | Constrcution of Random rubble masnory with hard stone in superstructure above plinth level; and upto five level, including leveling up with cement concrete 1:6:12 (1 cement :6 coarse sand : 12 graded stone aggregate 20mm nominal size) at required areas, stone issued by HSL to be collected from Colony Maintenance Dept.loading & unloading is in contractor's scope. |
| 12 | Construction of Brick work with common burnt clay F.P.S (Non-Modular) bricks of class designation 7.5 in superstructure above plinth level upto 10M height in all shapes and sizes in cement mortar 1:6 (1 Cement : 6 coarse sand) including cost of cement (PPC - Ramco), required materials and scaffolding / staging etc., complete all as directed. |
| 13 | Providing 15 mm thick plaster with CM(1:4) to walls at all heights and to projections, narrow bands and widths etc., including cost of all materials, tools, plant and labour, scaffolding arrangements and curing all as per specifications and directions of the engineer. |
| 14 | Provide and place in position Micro concrete (M-40) which shall be cement based prepacked component such as Rendrock - RG of fosroc make or equivalent mixed with 6mm size coarse aggregate in specified percentage by weight subjecting to the maximum of 50% as dtrected by the engineer incharge including mixing with suitable and approved mixing machine, pumping of concrete under pressure where ever required to ensure that the concrete laid for encasement is dense, properly compacted, free from honey combs, and necessary scafolding as directed by the engineer in charge. (Work shall be carried out at a level of 0.0M to 18.0M from Ground level) |
| 15 | Providing & Fixing Premium quality Vitrified tiles (Double charged) (on existing flooring including hacking of surface) of size 600X600mm 9mm ± 1mm thickness as per market in floors conforming to IS 15622 of approved make Kajaria / Cera / RAK / Johnson in all colours and shades laid on 20mm thick cement mortar (1:4) (1 cement : 4 coarse sand) in spacing of 2mm by using spacebars or lugs and providing matching epoxy pigment of MYK laticrete / Roff / saint gobain to maintain the level including required materials etc., complete all as directed. |
| 16 | Providing and fixing 1st quality anti-skid floor tiles in toilets (on existing flooring including hacking of surface) of size 600mmx600mm (Concept) of 9mm ± 1mm thickness as per market in floors conforming to IS 15622 of approved make Kajaria / Cera / RAK / Johnson in all colours and shades laid on 20mm thick cement mortar (1:4) (1 cement : 4 coarse sand) in spacing of 2mm by using spacebars or lugs and providing matching epoxy pigment of MYK laticrete / Roff / saint gobain to maintain the level including required materials etc., complete all as directed. |
| 17 | Providing and fixing 1st quality Glazed wall tiles in toilets (on existing walls including hacking of surface) of size 600mmx1200mm (Concept) of 15mm ± 1mm thickness as per market in floors conforming to IS 15622 of approved make Kajaria / Cera / RAK / Johnson in all colours and shades laid on 20mm thick cement mortar (1:3) (1 cement : 3 coarse sand) in spacing of 2mm by using spacebars or lugs and providing matching epoxy pigment of MYK laticrete / Roff / saint gobain to maintain the level including required materials etc., complete all as directed. |
| 18 | Providing and fixing 1st quality matt finished vitrified outdoor tile flooring (on existing flooring including hacking of surface) of size 600mmx600mm (Concept) of 9mm ± 1mm thickness as per market in floors conforming to IS 15622 of approved make Kajaria / Cera / RAK / Johnson in all colours and shades laid on 20mm thick cement mortar (1:4) (1 cement : 4 coarse sand) in spacing of 2mm by using spacebars or lugs and providing matching epoxy pigment of MYK laticrete / Roff / saint gobain to maintain the level including required materials etc., complete all as directed |
| 19 | Providing and fixing false ceiling with 7 mm thick pre finished gypsum tile boards of Armstrong / USG knauf or equivalent make (Equivalent cost & Specifications) of Size 600 x 600 mm of approved texture, design and patterns, to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanised powder coated iron section of0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grains per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L- shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall/ partition with the help of plastic rawl plugs at 50mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications complete all as directed. |
| 20 | Providing and fixing anodized extruded aluminium partitions with frame 65 x 40 mm with suitable door, part pannelled and part glazed with ACP Panel sheets / pre-laminated flat pressed particle board (NOVAPAN, ECOBOARD etc) of approved colour & make. Aluminium sections shall be powder coated with approved colour of 50 Microns conforming to IS:1948, fabricated from extruded sections of INDAL / JINDAL or approved equivalent make having minimum 1.9 ± 0.2 mm wall thickness as per IS:1285, IS:733. Glazing shall be frosted / clear float glass (as per user requirement) of 5 mm thickness of approved make SaintGobin / Modifloat including sanp fit type beading, concealed screws, fixtures (like tower bolts, hold fast, handles both sides, door stoppers with rubber shoes, 'L'drops, stays etc) with godrej lokcing arrangement for doors including cost of PVC / neoprene gasket fits all complete with necessary fillingup of gaps at the junctions, at top, bottom and sides etc., complete. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required. (overall dimesinons will be measured for payment) |
| 21 | Supply and Fix the vertical venetian blinds with fabric of thickness 0.35mm of approved make Jacobs / Vista with extruded aluminium head rail, carrier system, operating mechanism and aluminium frame including all fittings and accessories etc., complete all as directed. |
| 22 | Providing two(2) coats of synthetic enamel paint over a coat of zinc rich primer to wooden surafces / steel surfaces like doors, windows, grills etc., of required colour using approved branded paints like Asian / Berger / Nerolac, after removal of paint on old surface using wire brush or sand paper to give an even shade etc., complete all as directed |
| 23 | Removal of door / windows with frame and refixing the same in required location including basic repairs including all accessories all complete as directed by Engineer Incharge |
| 24 | Replacing of damaged glasses with one (4mm thick plain glass)in wooden window shutters including beading materials, labours etc., as directed by Engineer-in-charge. |
| 25 | Providing teak wood work in frames of doors, windows & other frames, wrought framed and fixed in position complete as directed by EIC. |
| 26 | Supply & providing 30mm thick flush door shutters of make KALPATHARU confirming to IS 2202 (Part 1) decorative type, solid core of block board construction withput frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters ( including polishing) ISI marked stainless steel butt hinges, hardware materials like aldrop & tower bolts, door stoppers etc., with necessary screws and complete. |
| 27 | Supply and fixing of 25 mm thick Heavy duty PVC doors with frame & shutter for toilets Sintex or equivalent make (Equivalent cost & Specifications) including aluminium aldrop, towerbolt, handles and butt hinges etc., complete |
| 28 | Apply two coats of premium quality arcylic emulsion paint of interior grade of approved brand like Asian paints (Royal shine) / Berger (silky luxury) and manufacture, Including applying additional costs wherever required to achieve even shade and colour. where ever specified by Engineer including necessary scaffolding and staging where ever required etc., complete. |
| 29 | Providing modified polymer mortar with cement sand ratio in 1:3 using Nito-bond SBR @ 7 Lits per Bag of cement, average thickness of 20 mm over the primed surface using Nito-Bond SBR in 1:1:3 by volume (SBR:Water:Cement) with necessary scaffolding arrangements etc. including cleaning of rest on reinforcement and application of nito zinc primer of fosroc make etc., complete |
| 30 | Providing and applying Floor paint from approved brands like Indigo of approved colour over prepared surface with primer and two coats of paint complete as directed by EIC. |
| 31 | Supply, Fabricate and Fixing of Structural steel work using MS Angles, Square hollow pipes, Flat bars for cladding frame work and fabrication work (to be informed by HSL) including two coat of anticorrosive paint over one coat of primer complete all as directed by the Engineer Incharge. (Note:The nature of work is to be carriedout at 0-10M from the Ground level) |
| 32 | Drilling of 12mm to 20 mm dia,200mm deep holes into the stone masonry wall/RCC structures/ slab etc., using mechanically operated hammer drilled diamond core cutting machine including grouting LOCK FIX or FOSROCor equivalent make (Equivalent cost & Specifications) comlete all as directed. |
| 33 | Anti- Termite Treatment of existing masonry and wood work by chemical emulsion @ one litre per hole at 300 mm interval and @ 0.5 litre per hole at 150 mm interval respectively including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement: 2 coarse sand) to the full depth of the hole With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration etc., complete |
| 34 | Supply and installation of Workstations of size 4x3.7x1.2m with 53 mm thick side walls of approved make Godrej / Featherlite or its equivalent etc., including all accessories, 4 Nos Back Chairs, 4 Nos Mobile Pedestals, 2 No Storage with sliding shutters, 4 Nos ABS Key Board trays and 4 Nos UPS trays |
| 35 | Cutting of trees branches of the girth upto 60 cm and Shift & handed over the useful materials to disposal section in the Yard etc., complete all as directed. |
| 36 | Applying putty of total thickness 1mm in two coats of approved brands Birla / JK / Asian to wall surfaces at all heights including applying suitable primer after through scrapping, sand papering and cleaning the old paint surface by manually / mechanically including necessary scaffolding and staging where ever required. Putty shall be finished till a smooth and even surface is achieved etc., complete all as directed. |
| 37 | Supply and fix 8 hook SS Cloth hangers with hooks of suitable screws, wall plugs, including necessary fixtures complete as directed by the EIC. |
| 38 | Provide and fix ISI marked Stainless steel hinges of size 150 mm long with necessary fittings to doors. |
| 39 | Supply and fix 6\\" (Inch) Premium Stainless Steel Door Handles with necessary fittings etc., complete all as directed. |
| 40 | Provide and fix SS Long tower bolts (powder coated) (barrel type) of size 150x10 mm with necessary fittings for doors. (Item includes removal of old one tower bolt and handed over to CE dept.,) |
| 41 | Provide and fix SS aldrops for doors of size 300mm long 16mm dia with necessary fittings etc., complete all as directed. |
| 42 | Providing and fixing SS die cast body tubular type universal hydraulic door closer of make Godrej or its equivalent (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and SS screws etc. complete all as directed. |
| 43 | Supply and providing Stainless Steel hardware of 150mm door stopper |
| 44 | Supply, fit and fix white glazed earthenware European type water closest of Jaquar or equivalent (Equivalent cost & Specifications) with 'P' or 'S' trap with or without vent hole, colour or black solid plastic seat and cover with low level cistern of 10 litres capacity of same make as specified including all fittings, materials, tools and labour etc., complete |
| 45 | Providing and fixing white vitreous china flat back lipped front urinal basin of 430x260x350 mm with G.I clamps, 32mm dia PVC waste pipe, 15mm dia PVC polythene connector including fittings and brackets, cutting and making good the walls and floors wherever required etc., of make Jaquar or equivalent (Equivalent cost & Specifications) Complete all as directed. |
| 46 | Providing and fixing white vitreous china urinal partition of size 130X345X675mm with G.I clamps including fittings and brackets, cutting and making good the walls and floors wherever required etc., of make Jaquar or equivalent (Equivalent cost & Specifications) Complete all as directed. |
| 47 | Providing & Fixing Stainless steel health faucet set with flexible hose, angle valve, wall hook and all fittings of make Jaquar or equivalent (Equivalent cost & Specifications) Complete all as directed. |
| 48 | Supply & Fixing Stainless steel long body bib cock with wall flange and all fittings of make Jaquar or equivalent (Equivalent cost & Specifications) Complete all as directed. |
| 49 | Supply and providing Stainless steel Long neck pillar cock of make Jaquar or equivalent (Equivalent cost & Specifications) Complete all as directed. |
| 50 | Supply & Fixing Stainless steel Angle cocks of make Jaquar or equivalent (Equivalent cost & Specifications) Complete all as directed. |
| 51 | Providing & Fixing Stainless Steel floor Grating of Jaquar or equivalent (Equivalent cost & Specifications) Complete with all fittings and fixing arrangements. |
| 52 | Providing and fixing Stainless steel soap tray of of Jaquar or equivalent (Equivalent cost & Specifications) Complete with all fittings and fixing arrangements. |
| 53 | Supplying, fitting and glazed vitreous china wash basin 550X400mm Size of Jaquar or equivalent (Equivalent cost & Specifications) with central tap hole including supplying and fixing of C.I brackets painted with one coat of approved red oxide Zinc Chromate primer and two coats of approved synthetic enamel paints, 15mm dia Chromium plated approved deluxe head pillar tap of Hindware/Parry or Equalient make, 32mm dia Chrome Plate waste couplings, flexible waste hose, chain rubber plug etc, all as per drawings, specifications and directions of the Engineer, including all materials, tools, plant and labour etc., complete |
| 54 | Providing and fixing 6 mm thick frame less beveled edge mirror of superior glass of approved quality of saint gobin / modi gaurd complete using stain less steel studs including all accessories etc., complete |
| 55 | Providing and fixing 600mm wide SS Towel rail of standard length of Jaquar or equivalent(Equivalent cost & Specifications) including all accessories etc., complete |
| 56 | Supply of 110 mm dia UPVC (SWR) Soil and waste pipes conforming to IS : 13592 Type B, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes sudhakar/supreme/ prince or equivalent make (Equivalent cost & Specifications) complete |
| 57 | Removal of existing iron door frames, shutters and partitions etc., and useful material has to be handed over to the Disposal section along with weighment receipt and dispose the un-servicable materials with in a 100m lead etc., complete all as directed by HSL |
| 58 | Providing and fixing 25 mm nominal dia Pipes CPVC pipes for plumbing lines of approved make Supreme / Prince / Astrial including fittings and the cost of cutting chases and making good the same including testing of joints (sudhakar/supreme/ prince make) complete as per direction of Engineer in Charge. |
| 59 | Providing and fixing 32 mm nominal dia Pipes CPVC pipes for plumbing lines of approved make Supreme / Prince / Astrial including fittings and the cost of cutting chases and making good the same including testing of joints (sudhakar/supreme/ prince make) complete as per direction of Engineer in Charge. |
| 60 | Disposal of debries, surplus excavated earth, wooden scrap, garbage and rubbish outside the HSL premises to private dumping yard up to 20Km lead (not to dump in HSL colony dumping area & surrounding areas) it is the responsibility of the firm to ensure no objection shall be raised by Muncipal authorities / from any bod. If any dispute arises the agency has to sort out at their own risk etc., complete all as directed. |
| 61 | Drain cleaning, removal of rank vegetation, silt and all types of rubbish from drain and complete all work as directed by EIC. Disposal of same to outside of HSL. |
| 62 | Provision of 110mm dia hole by cutting of existing RR masonry wall by Core cutting machine without damaging the existing wall complete all as directed. |
| 63 | Providing and fixing 32mm nominal bore Gun metal gate valve with C.I wheel of approved quality (screwed end) for supply lines/mains zoloto or equivalent make |
| 64 | Supply, Install & Commissioning of vertical type cylindrical HDPE 2000 lits net capacity Water Tanks of Sintex Reno make including all connections and accessories like inlet, out let, wash out, over flow connections, ball float valves complete all as directed. |
| 65 | Supply and providing 100mm dia SS Vent cowl complete all as directed by EIC. |
| 66 | Removing of existing unused machinery from floor level in the workshop and Handing over the servicable items to Civil Engineering dept./ scrap yard and dispose the un-servicable material to 50M lead complete all as directed by HSL |
| 67 | Part B :- Electrical Works |
| 68 | Supply, fix, test and commissioning of 2X2, 36/39Watt ceiling mounted White LED Light fitting with all accessories (Approved make Wipro/ Jaquar/ philips/ CG/ Havells or Equivalent) |
| 69 | Supply, fix, test and commissioning of 20watt LED Tube light as directed by the engineer incharge. (App .makes CG/Havells/Phillips.) |
| 70 | Supply, fix, test and commissioning of 15/18watt LED round type ceiling light as directed by the engineer incharge. (App .makes CG/Havells/Phillips.) |
| 71 | Supply, fix, test and commissioning of 3phase,4way VTPN DB with 125A isolator as incomer and MCBs,DP 32A -4,SP 16-4no-SP 10A-no4 as directed by the engineer incharge. (App .makes CG/Havells/Phillips.) |
| 72 | Supply, fix, test and commissioning of 6way STPN Double door MBBDB with 10ka,32A isolator as incomer and MCBs SP10A MCBs as outgoings, as directed by the engineer incharge. (App .makes CG/Havells/Phillips.) |
| 73 | Consealed PVC conduit wiring with 3 runs of 1.5 sq.mm FRLSH PVC flexible copper cable for two point controlled by one switch as directed. (App.makes: Universal/Polycab/KEI/Finolex or Equivalent) |
| 74 | Consealed PVC conduit wiring with 3 runs of 2.5 sq.mm FRLSH PVC flexible copper wires run through PVC pipe and all drops and switch boards for One point controlled by one switch.(App.makes: Universal/Polycab/KEI/Finolex or Equivalent) |
| 75 | Consealed PVC conduit wiring with 3 runs of 4.0 sq.mm FRLSH PVC flexible copper wires run through PVC pipe and all drops and switch boards for One point controlled by one switch.(App.makes: Universal/Polycab/KEI/Finolex or Equivalent) |
| 76 | Supply, fix,test & comissioning of 8 modular type switche board along with gang box and 1no -3+2pin Modular sockets and switches as directed by engineer incharge. |
| 77 | Supply, fix,test & comissioning of 8 modular type switche board along with gang box and 3nos 6A Modular sockets & 2 switches as directed by engineer incharge. |
| 78 | Supply, fix,test & comissioning of 3 modular type switche board along with gang box and 1nos 6/16A Modular sockets & switche as directed by engineer incharge. |
| 79 | Supply, fix, test & commissioning of 1phase, 240V, 400 mm sweep Wall mount fan as directed by engineer in-charge. |
| 80 | Supply, fix, test & commissioning of 1phase, 240V, 200 mm sweep Exhaust fan as directed by engineer in-charge. |
| 81 | Supply, fix, test & Commissioning of 32A DP MCB Double door DB with enclosure for AC Incoming supply as directed by engineer in-charge.(App.make: Legrand/ABB/Siemens/Schneider) |
| 82 | Supply, fix, test & Commissioning of 20A DP MCB Double door DB with enclosure for AC Incoming supply as directed by engineer in-charge.(App.make: Legrand/ABB/Siemens/Schneider) |
| 83 | Supply lay,test and comissioning of 3.5C X 16Sq.mm PVC Armoured Aluminium cable, run along with 8SWG GI wire. (App.makes: Universal/Polycab/KEI/Finolex or Equivalent) |
| 84 | Supply lay,test and comissioning of 3.5C X 35Sq.mm PVC Armoured Aluminium cable, run along with 8SWG GI wire. (App.makes: Universal/Polycab/KEI/Finolex or Equivalent) |
| 85 | Supply lay,test and comissioning of 3.5C X 50Sq.mm PVC Armoured Aluminium cable, run along with 8SWG GI wire. (App.makes: Universal/Polycab/KEI/Finolex or Equivalent) |
| 86 | Supply,Install, test and comissioning of 1.5Ton capacity, STAR rated Copper Inverter Split AC,1PH, 230 V, 50 Hz, Copper Condenser, along with supply ,installation of 2.0Kva Stabulizer, control cables,copper pipe with foam, core cutting, Outdoor unit stand, drain pipe, and etc. |
| 87 | Supply,Install, test and comissioning of 2.0Ton,4way, STAR rated Copper Inverter Cassette type AC,1PH, 230 V, 50 Hz, Copper Condenser, along with supply ,installation of 3.0Kva Stabulizer, control cables,copper pipe with foam, core cutting, Outdoor unit stand, drain pipe, and etc. |
| 88 | Supply,Install, test and comissioning of 4.0Ton,4way swing,cassette type, STAR rated Copper Inverter Split AC,1PH, 230 V, 50 Hz, Copper Condenser, along with supply ,installation of suitable rated Stabulizer, cable,control MCB,copper pipe with foam, core cutting, Outdoor unit stand, drain pipe, and etc. |
| 89 | Supply and fixing of De-Humidifier (50pints/day) |
| 90 | Supply lay,test and comissioning of 3.5C X 70Sq.mm PVC Armoured Aluminium cable, run along with 8SWG GI wire. (App.makes: Universal/Polycab/KEI/Finolex or Equivalent) |
| 91 | Providing Standard GI pipe Earth pit with75mm dia, 2400mm long pipe including exvation,constuction of brick mansonary chamber as per IS3043-1987 or latest revision. |
| 92 | Supply and Laying of 25X6mm GI Earth flat from Earth pit to panel with all necessary accessories as directed by the engineer |
| 93 | Design, Supply, Installation, Testing & commissioning of LT DB panel confirming to IP55,3-Ph, 4 wire,433V, 50Hz AC supply cubicle board of 14 SWG thick MS Sheet, consisting of MCB / MCCBs, etc., Al.TPN bus bar with, Digital Voltmeter,Ammeter,MFM, Indication lamps, MCBs for control, Incomer : a) 400A 4Pole MCCB 36KA- 1 Nos.Out Goings:a) 250A 4pole MCCB 36KA - 3 Nosb) 100A 4pole MCCB 25KA - 2 No c) 63A 4P MCB 25ka - 1no d) 32A 2P MCB10ka - 2No d)16A 2P,MCB 10ka- 2nos |
| 94 | Supply, install and commissioning of LED High-bay fixture with high pressure die cast aluminium housing,system wattage of maximum 160/200Watts,lumen output of lamp, minimum system efficacy of 120lumen/watts, with suitable driver and including all necessary accessories as required complete. Make:- Cat No:Philips,Bajaj,Wipro or equivalent approved make. |
| 95 | GI conduit wiring (2 runs of 2.5 Sq.mm) of 1100V grade FRLSH PVC insulated flexible cu.cable of reputed make like FINOLEX or equivalent confirming to IS:694 and with latest amendments including bends, inspection boxes fixing clamps, heavy duty GI saddles/bases, cleats and all other fixing accessories as specified. GI conduit & Cu. wire of 16SWG to be used as earth which ever is feasible as approved by Engineer incharge. |
| 96 | Removal of Old Cable, fans,Light fittings,wires, Acs, and handover to the PM dept. |
| 97 | Part C :- LAN Works |
| 98 | Supply, installation, testing and commissioning of following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate, modules erected with necessary connection as desired by Engineer In charge. Modem Jack for Computer Open RJ-45 CAT VI. |
| 99 | Supplying & erecting approved make UTP cable for LAN of following size in existing pipe as per direction [D] CAT - 6e. |
| 100 | Supply and laying of 1 inch PVC Conduit of approved make |
| 101 | SITC of Jack Panel, fully loaded with 24 nos. UTP ports for PCB based IO Jacks (RJ45, TIA-568C Category-6, Installation and Termination of all 24 nos. Catergory-6 UTP , unloaded with individually replaceable 24 nos. Category-6 I/O Jacks complying with TIA-568.C.2, as per given jack specification Shall be suitable for loading unshielded & shielded jacks for different category systems (CAT 6 & CAT 6A). Make & Model shall be approved by Engineer in-charge prior procurement. |
| 102 | SITC of company fabricated patch cords shall conform to Cat- 6 & conductor shall be stranded for better flexibility shall support network line speeds up to 1 Gbps Shall have RJ-45 jacks. (A) 1 Mtr |
| 103 | SITC of company fabricated patch cords shall conform to Cat- 6 & conductor shall be stranded for better flexibility shall support network line speeds up to 1 Gbps Shall have RJ-45 jacks. (A) 2 Mtr (for System side) |
| 104 | Providing & erecting Fiber Optic Cable, 50/125μ, OM3 Outdoor Shall be 50μ, Multi mode OM3 non-metallic armored cable as per ISO/IEC-11801 Shall be able to meet Gigabit & 10 Gigabit Ethernet performance up to 300 meters requirement specified by IEEE 802.3z (1000 Base-X) & IEEE 802.3ae (10G Base-X) Shall be suitable for using in the building shaft and outdoor laying, Shall be Unitube Jacketing Material Shall be HDPE with nominal thickness of 2.1mm and overall diameter (Nominal )10mm . (A) 6 core Multi mode |
| 105 | Splicing charges per Core |
| 106 | SITC of 24 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP Combo ports Advanced L2 switching and security features L2+ Static Routing Optional “standard mode” or “surveillance mode” management user interface 193 W PoE budget. Recommended Make: HP or equivalent approved by Engineer in-charge |
| 107 | SITC of 8 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP Combo ports Advanced L2 switching and security features L2+ Static Routing Optional “standard mode” or “surveillance mode” management user interface 193 W PoE budget. Recommended Make: HP or equivelnt approved by Engineer in-charge |
| 108 | SITC of Switch connected mm Transceivers (1G). Make: HP or Cisco |
| 109 | Supply and connecting OFC MM Patch Cards SC-LC (3Mtrs) |
| 110 | Providing & Erecting Network rack with following capacity with Necessary cooling fan,Cable manager, 6A PDU, equipment rack with necessary mounting accessories. (A) 6 U. Makes & Models shall be approved by Engineer in-charge prior procurement. |
| 111 | SITC of LIU 24 Port fully loaded Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 29, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 day
Jul 21, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender