Tender For Construction Of Garrage Cum Office Near Town Hall Achabal.Advertised Cost=₹07.38 Lacs (Amount Without Gst =06.26 Lacs And Gst Amount =1.12 Lacs )
Tender Value
7.38 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
3 days left
EMD
14760
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Garrage Cum Office Near Town Hall Achabal.Advertised Cost=₹07.38 Lacs (Amount Without Gst =06.26 Lacs And Gst Amount =1.12 Lacs )
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Jul-2026 | Corrigendum | Fee | 15-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | (PART A) Fire Hydrant SystemSupply, installation, testing & commissioning of First-Aid fire hose reels wall mounting swinging type, fitted with of heavy duty mild steel construction with CI brackets, 25 mm dia. ball valve and 20 mm dia. and 40 m long high pressure Hose Reel tubing as per IS:444 with Stainless Steel shut-off nozzle having 5 mm dia. orifice. The hose reel shall strictly confirm to IS:884-1985. |
| 2 | Providing and fixing 2 way gunmetal fire brigade inlet breaching head as per IS:904 specification tested for 20Kg/sq-cm with 63mm dia instantaneous type inlet and 150/100mm dia flanged outlet with built in check valve for fire brigade connection to under ground tanks and fire risers including companion flanges including nuts, bolts & washers etc. |
| 3 | Supply, installation, testing & commissioning of Gun Metal Fire brigade suction hose coupling (Draw-out Connection) with nut for female coupling as per IS:902-1974 complete with 100 mm dia. GI suction pipe and 100 mm dia. 1 No. CI foot valve flanged (to be connected to static water tank). |
| 4 | Providing and fixing MS cabinet (to enclose above Draw-out/Fire brigade inlet connections) fabricated from 16g sheet with full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and suitably mounted on a raised masonry platform as required |
| 5 | Supply, installation, testing & commissioning of pressure gauges with isolation cocks and chrome plated copper pipes as hydrant station to read pressure from 0-25 kg/cm2 complete and of dial dia 150 mm |
| 6 | Supply, installation, testing & commissioning of air cushion tank (air-vessel) 250 mm dia.x1.0 m high with dished top, made of minimum 6 mm thick MS pipe/plate complete with 25 mm dia. brass air valve (ball valve, pressure gauge type), 25 mm dia brass stop cock, nipple, tees, B46 elbow, pipe and all accessories as required including fixing brackets. |
| 7 | (B) Internal PipingSupply, installation, testing & commissioning of Black steel pipe (IS:1239 Part-I) heavy C-class including cutting, threading, welding etc. bends, elbows reducers, clamps, hangers etc. including cutting holes in brick or RCC walls/slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. MS rods, angles channels, slotted angle, etc., cutting to sizes, drilling welding fixing to insert plates, including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and red shade including all steel work. 100 mm dia |
| 8 | Supply, installation, testing & commissioning of Black steel pipe (IS:1239 Part-I) heavy C-class including cutting, threading, welding etc. bends, elbows reducers, clamps, hangers etc. including cutting holes in brick or RCC walls/slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. MS rods, angles channels, slotted angle, etc., cutting to sizes, drilling welding fixing to insert plates, including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and red shade including all steel work. 80 mm dia |
| 9 | Supply, installation, testing & commissioning of Black steel pipe (IS:1239 Part-I) heavy C-class including cutting, threading, welding etc. bends, elbows reducers, clamps, hangers etc. including cutting holes in brick or RCC walls/slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. MS rods, angles channels, slotted angle, etc., cutting to sizes, drilling welding fixing to insert plates, including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and red shade including all steel work. 65 mm dia |
| 10 | Supply, installation, testing & commissioning of Black steel pipe (IS:1239 Part-I) heavy C-class including cutting, threading, welding etc. bends, elbows reducers, clamps, hangers etc. including cutting holes in brick or RCC walls/slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. MS rods, angles channels, slotted angle, etc., cutting to sizes, drilling welding fixing to insert plates, including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and red shade including all steel work. 50 mm dia |
| 11 | Supply, installation, testing & commissioning of Black steel pipe (IS:1239 Part-I) heavy C-class including cutting, threading, welding etc. bends, elbows reducers, clamps, hangers etc. including cutting holes in brick or RCC walls/slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. MS rods, angles channels, slotted angle, etc., cutting to sizes, drilling welding fixing to insert plates, including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and red shade including all steel work. 25 mm dia |
| 12 | Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate of nominal size 40 mm in thrust blocks at bends, tees etc and alsos as support to vertical pipes of yard hydrants including excavation and refilling of earth work centering and shuttering for concrete complete in all respects. |
| 13 | Supply, installation, testing & commissioning of gun metal ball valve 50mm dia for flushing connection. |
| 14 | Supply, installation, testing & commissioning of gun metal ball valve 25mm dia. |
| 15 | FIRE PUMPS, VALVES & ACCESSORIESSupply, lnstallation, testing & Commissioning. of Electrical Motor Diven Automatic pressurisation (Terrace) pumping set (factory Filted) consisting of the following as per specifications.a) Providing and fixing of horizontal split casing single/multi stage, single outlet punping set with bronze impeller & with gland capable of delivering 450 LPM against at total head of 35 M with Cl. body and connected by a flexible coupling to a totally cnclosed fan cooled induction motor mounted on a common structural base plates with all pump accessories complete as per specifications including pressure gauge with gunmttal isolation valves and anti vibration pads, motor to be suitable for 415 volts, 3 phase, 50 cycles AC supply (Specification as per fire fighting requirements).b) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 volts ±15%, 3 phase 50 Hz AC supply of suitable capacity (approx. 10 KW) for the above pump with synchronous speed of 2900 RPM confining to IS:325 & duly coupled with above pump coupled with flexible coupling inciuding earthening as per relevant Indian Standard and specifications.c) Common bed plate for mounting pump and motor fabricated of suitable MS channel as per manufacturer's recommendations.d) Suitable RCC Pump foundations as per manufacturer's design 4 Nos Duniop Anti vibration (cushy foot) heavy duty mounting pads. |
| 16 | Panel For Fire PumpsProviding and fixing motor conrol centres fabricated out of l6 gauge M.S. shect with powder Coated finish. The control panels should he compatible with HP. of the motor as under and as per specitications with automatic star delta starter.One incoming main isolation MCCB TPN of Min. 100 Amps. rating. Fully taped aluminium bus bar of required capacity in a separate bus bar chamber. Isolation MCCB of required rating and with push button automatic starter as per requirement with and ON/OFF indicating lights for One pump of minimum 10 HP Single phasing preventors of suitable rating for motor.Rotary type Auto/Manual/ ON/OFF selection Switches.One 96 mm square panel type voltmeer reading 0-500 V with rotary selector switch for reading voltage between phases.One 96mm square panel type Amp. meter reading 0-500 Amp. for pump.Appropriate etched plastic plate for each starter/switch. |
| 17 | Providing and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 5.5 kg/cm2 and test pressure 10.0 kg/cm2 with unit control including nuts, bolts matching flanges (screwed or welded) complete with 1.5mm thick compressed asbestos gasket of same rating.65 mm dia or as per nominal pump dia |
| 18 | Providing and fixing CI double flanges Y suction strainer (PN 2.0) “Y” type including, nuts, bolts matching flanges (screwed or welded) complete with 1.5mm thick compressed asbestos gasket of same rating .65 mm dia or as per nominal pump dia |
| 19 | Providing and fixing butterfly valves, wafer end type class PN 1.6 as per IS: 13095-1991 or BS: 5155, including necessary nuts, bolts, gaskets etc. complete (without gear box) & matching flanges (screwed or welded) complete with 1.5mm thick compressed asbestos gasket of same rating .100mm dia nominal bore or as per nominal pump dia. |
| 20 | 80mm dia nominal bore or as per nominal pump dia. |
| 21 | 65mm dia nominal bore or as per nominal pump dia. |
| 22 | Providing and fixing CI double flanged horizontal/ vertical type non-return valve including nuts, bolts,matching flanges (screwed or welded) complete with 1.5mm thick compressed asbestos gasket of same rating, complete to IS:5312, part-I, swing type, class PN 1.6.100 mm dia nominal bore or as per nominal pump dia. |
| 23 | 65 mm dia nominal bore or as per nominal pump dia. |
| 24 | Providing and fixing of sluice valve of 1.6 PN rating flanged at both ends of following sizes including necessary nuts, bolts, gaskets etc. complete (without gear box) 100mm dia nominal bore. |
| 25 | Providing earthing station with GI Earthing Plate (600mm x 600mm) 8 mm thick for pumps and MCC panels including excavation, CI manhole cover and frame complete as per specifications and IE rules. |
| 26 | GI Strip of following sizes 25 x 6 mm G |
| 27 | Providing and fixing pressure switch (for operation at 0-35 kg/cm2) with required fittings and accessories complete. |
| 28 | Structural Steel like angles, channels etc at various locations for supporting Pipe headers, Pressure vessel, Valves etc |
| 29 | Providing and fixing liquid level controller for fire pump to cut off in case low level of water in tank including cables, pannel etc. and making necessary connection to panel and commissioning. |
| 30 | P/F of electrical cables from main incomer to control panel and from Control panel to Electric driven fire pump as per sizes given.3.5 Core x 35 Sq mm Al Cable. |
| 31 | 100mm width x 50mm depth x 2mm thick perforted M.S. cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S suspenders and including painting etc. as reqd. |
| 32 | Providing and Fixing of ISI marked (IS:15683:2006) protable CO2 type fire extinguisher type 4.5 kg capacity, including valve, discharge hose of not less than 10 mm dia and 1 metre long complete in all respects including initiall filled CO2 gas confirming to IS : 307 - 1966 & filled to a filling rate of not more than .667 and wall suspension bracket. |
| 33 | Supply, installation, testing & commissioning of 9-kg stored-pressure AFFF foam portable fire extinguisher For Garage with minimum fire rating 13A/55B, ISI-marked to IS 15683, complete with discharge hose/nozzle, wall bracket, first fill, and commissioning; placement as per IS 2190, with signage. |
| 34 | Providing and Fixing of ISI marked (IS:15683:2006) protable ABC type portable extinguisher of capacity 4 kg , dry powder type (Gas Cartridge) confirming to IS: 15683 : 2006 with cylinder initially fully charged with dry powder, ISI marked confirming to IS: 15683 : 2006 complete with stsndard discharge valve with tube , CI bracket for wall mounting. |
| 35 | Providing and fixing of fire bucket stands for 6 No. Buckets at designated locations. |
| 36 | Providing and fixing of fire buckets of 9 Litre capacity to the stands. |
| 37 | Providing, fitting of total 5000 ltr (2500 ltr x 2No.) terrace HDPE tank with necessary connections (Equivalent Assembly) along with RCC foundations. |
| 38 | Providing, fitting of 25/50 mm dia Automatic Airrelease Valve as per Standard Fire Practice. |
| 39 | Supply and fixing of illuminated Fire exit signages. This sign may be used to Indicate all exits which can be used in the event of an emergency. It shall be accompanied: by an arrow as per IS-12349(1988) standards. |
| 40 | PART B: Fire Alarm and Detection System.Supply,Installation,Testing and Commissioning of Miroprocessor based 2 -Zone Conventional Fire Alarm Control panel with 2 hours battery back up with built in charger. |
| 41 | Supply,Installation,Testing and Commissioning of Conventional smoke Detector with builtin LED and mounting base complete with all connections etc as required. |
| 42 | Supply,Installation,Testing and Commissioning of Conventional Heat Detector operating at 54/57 C with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all the connections as required. |
| 43 | SITC of Conventional Manual Call point of MS construction in surface/recess with Stainless steel chain and hammer assembly complet with glass and push button as required. |
| 44 | SITC of Conventional type Electronic Hooter for alarm/evacuation signal and necessary fixing arrangements with key complete as required. |
| 45 | LSZH- 2 C X 1.5 Sq mm armoured cable |
| 46 | Supplying and Fixing of Following sizes of PVC Conduit along with Accessories in surface/Recess including painting in case of surface conduit,cutting the wall and making good the same in case of recessed conduit as required.25mm PVC Conduit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 15, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender