Tender For Deep Drilling Of 125 Mm Dia Bore Hole By Using Odex Method Including Providing, Installation, Testing, Commissioning Of Submersible Pump Set Including Allied Electro-Mechanical Work At Village Pipple Near Chandi Mata Mandir In Pyt. Sulghar
Tender Value
4.63 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
1 days left
EMD
9260
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Deep Drilling Of 125 Mm Dia Bore Hole By Using Odex Method Including Providing, Installation, Testing, Commissioning Of Submersible Pump Set Including Allied Electro-Mechanical Work At Village Pipple Near Chandi Mata Mandir In Pyt. Sulghar Of District Udh Ur On Turnkey Basis (Epc) Under Cdf (2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | Deep drilling of bore hole 125 mm dia. using ODEX method and simultaneously driving of 125 mm dia ERW casing pipe as per the Strata encountered. The job also includes extraction of M.S casing pipe if any required during the drilling work. |
| 2 | Providing of 125 mm dia. M.S. Casing Pipe. The 125 mm dia. M.S. Casing Pipe ISI marked should have thickness of 5.4 mm conforming to as per IS 4270 / 2001 medium class (Part-I) 2004, (Medium B - Class, weight per mtrs=18 kg) electric resistance welded beveled ended inside beed free pipes. All pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. There should be no circumferential weld. The pipe from inside should be beed free having smooth finish. Each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with IS 4270/2001 with latest amendments. All the physical and chemical properties of pipe including tensile strength should be in accordance with IS 4270/2001 with latest amendments. The cost includes transportation charges upto the site and 3rd party inspection charges of the material at the manufacturer end. |
| 3 | Providing, fitting, installation, testing and commissioning of suitable parameter Submersible pump motor set of reputed make (preferable Make viz. KSB, Crompton, Kirloskar, CRI makes Conforming to relevant IS Code) The job includes lowering of submersible pump set into the bore hole by way of providing and lowering of 32 mm Dia UPVC water well column pipes of 3 metres of length (Pressure= 9-12 Kgf/cm²) each along with coupler. Submersible cable with fixtures such as support wire, clamps, nuts, bolts & washers. Fabrication and fitting of well cap. Providing and fitting of suitable rated automatic voltage stabilizer of ISI reputed make. Providing, fitting and installation of single-phase starter controller panel of reputed make to run submersible pump. Fabrication, providing, installation and fitting of box type sheet enclosure for fitting of panel and voltage stabilizer with proper spacing. Providing and laying of 2.5 sq. mm 3 core sub cable of suitable length as per site condition. Providing and laying of 2 core PVC insulated 6 sq. mm (Aluminium) as service line requirement from LT pole to starter panel of reputed make. Making of electrical connection with the starter panel, service line and submersible pump set after properly thimbling and testing and commissioning thereof providing and fitting of UPVC pipe of 32 mm dia for interconnections from outlet of bore to designated points as required at the site. The job also includes providing, fitting of elbows, bends, sockets of 32 mm Dia for fitting of outer connections. The job includes cost of material and labour charges of tools and tackles and installation & testing of bore at site |
| 4 | Cost of 32 mm dia UPVC water well column pipe 3 metres of length (Pressure= 9-12 Kgf/cm²) each along with coupler |
| 5 | Providing and laying of 2.5 mm² 3 core submersible cable 0-90Mtr. |
| 6 | Installation of Plaque (Metal Fabricated) of suitable size carrying the inscription 'Members of the Legislative Assembly Constituency Development Scheme Work' indicating the cost involved, the commencement, completion and inauguration date and the name of MLA sponsoring the project which should be erected near the hand pump. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender