Tender For Supply Installation Testing and Commissioning of 50Hp/37Kw Pump Set For Improvement Of Water Supply To Mangor And Surrounding Area In Vasco Constituency.
Tender Value
12.09 Lakhs
Estimated cost
Bid Submission
10 Jul 2026
1 days left
EMD
24188
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing and Commissioning of 50Hp/37Kw Pump Set For Improvement Of Water Supply To Mangor And Surrounding Area In Vasco Constituency.
BOQ
| Sl. No. | Item Description |
| 1 | Supply , Installation, Testing, Commissioning of 50HP/37KW pump in Kirloskar/ Jyoti or equivalent horizontal split case, suitable to operate on 3 phase 415V and with specifications as under:: i) Total Head in meters 30 mtrsii) Discharge in M3/HR : 300Cum/hr.iii) Speed in rpm : 1450iv)Stuffing Box Details :Glandv) Impeller : Closed ( CI )vi) Pump Size in mm : 150 x 125vii) Pump Casing : CIviii) Pump Shaft : C-40The Pump Shall be complete with all accessaries Coupling , Coupling Guard, foundation bolts etc. complete and as approved by Engineer-in-Charge. |
| 2 | Supply , Installation, Testing, Commissioning of 37KW , 3 phase, 415Volts , Induction motor make Kirloskar /Crompton/ BBL or equivalent , Pole: 6 Pole, RPM:1450-1500RPM, frequency 50 Hz. Complete as approved by Engineer-in-Charge. |
| 3 | Providing and Fixing of MS base frame of suitable size for above 50 HP pump set, complete as required and as directed by Engineer-in-Charge. |
| 4 | Shifting, testing and commissioning of electronic type three phase energy meter (KWh), 4 wire, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display with other required accessories and wire as per direction of Engineer In Charge. |
| 5 | Supplying at store or site of work including railway freight carting loading unloading stacking etc. Cast iron double flanged manually operated Sluice Valve generally conforming to IS:14846 - 2000 having body door dome wedge in graded cast iron to IS:210 Gr. FG 200 min. four faces and spindle nut of leaded tin bronze to IS:318 Gr. LTB 2 inside screw of non-rising stainless steel AISI 410 spindle flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350mm and above will be fitted with BTB and Spur gear box and back seat bush.) etc complete TYPE P.N. 1.6 (Class A );Dia in mm;200 |
| 6 | Supplying at store or site of work including railway freight carting loading unloading stacking etc. Cast Iron double flanged single door swing non-return valve generally conforming to IS:5312 part-I having body door cover in graded cast iron to IS:210 Gr. FG 200 body Ring in leaded tin bronze IS 318 GR LTB2 and door ring in natural rubber & bearing block of leaded tin bronze to IS:318 Gr. LTB 2 ( 350 mm & above ) hinge pin of stainless steel AISI 410 Flanges drilled to IS:1538 Table 4 & 6 TYPE P.N. 1.6 (Class A);Dia in mm;200 |
| 7 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I;Nominal diamter in mm.;200 |
| 8 | Making flanged joints for C.I./D.I. Pipes and specials with rubber insertion nuts and bolts including necessary hydraulic testing etc. complete including cost of rubber insertion nuts and boltsas directed by the engineer in-charge.;Nominal diamter in mm.;125 |
| 9 | Making flanged joints for C.I./D.I. Pipes and specials with rubber insertion nuts and bolts including necessary hydraulic testing etc. complete including cost of rubber insertion nuts and boltsas directed by the engineer in-charge.;Nominal diamter in mm.;150 |
| 10 | Making flanged joints for C.I./D.I. Pipes and specials with rubber insertion nuts and bolts including necessary hydraulic testing etc. complete including cost of rubber insertion nuts and boltsas directed by the engineer in-charge.;Nominal diamter in mm.;200 |
| 11 | Supplying stacking at site and conveying hoisting laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting bending welding procurement of plates gas cutting to required size rolling tack welding assembling in suitable length to form special welding on automatic machine and forming V edge on both ends of special as required hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete;With 10 mm -12 mm thick plate;Tees bends reducers |
| 12 | Supplying stacking at site and conveying hoisting laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting bending welding procurement of plates gas cutting to required size rolling tack welding assembling in suitable length to form special welding on automatic machine and forming V edge on both ends of special as required hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete;With 10 mm -12 mm thick plate;M.S.socketed tail piece suitable for connectiong M.S pipeline with C.I./D.I pipeline |
| 13 | Supplying stacking at site and conveying hoisting laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting bending welding procurement of plates gas cutting to required size rolling tack welding assembling in suitable length to form special welding on automatic machine and forming V edge on both ends of special as required hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete;With 25 mm thick Plate;Flanges |
| 14 | Supply of 3 core armoured PVC/XLPE insulated PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) IS:7098(Part I) with latest amendments of following size.;3 Core 16 sq.mm |
| 15 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface etc. complete as required |
| 16 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required.;(5) 3 x 16 Sq. mm. |
| 17 | Supply and erecting of 48 inch (1200mm sweep) ceiling fan double ball bearing type complete with all accessories.;(c) Cat C |
| 18 | Supply of 4 feet 36/40 W single patti type fluorescent luminaire with electronic ballst complete with all accessories including 4 feet 36/40 W fluorecent tube.;(b) Cat B |
| 19 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in PVC casing caping with modular switch modular plates suitable size modular surface box of specified Category and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required.;(a) Group A -- with Cat B Modular Accessories |
| 20 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 21 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering shuttering and finishing :;All works upto plinth level |
| 22 | TWO TRACK SLIDING WINDOW (Heavy):-;Providing & fixing Two Track sliding window Yashashri make or equivalent in heavy sections made out of 104mm x 51 mm x 2.5 mm Upvc multi cavity track section & shutter made out of 45mm x54mm x 2.5mm Upvc multi cavity section welded in corners with Glass beading & EPDM Gasket & 4mm clear glass with lock & rollers. The average weight of Two Track Sliding window (Heavy) is 16.75 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender