Tender For Installation Of Di Sluice Valve And Construction Of Reinforced Cement Concrete Chambers Near Hdfc Bank ,Aquem In Margao Constituency.
Tender Value
14.68 Lakhs
Estimated cost
Bid Submission
10 Jul 2026
4 days left
EMD
29374
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of Di Sluice Valve And Construction Of Reinforced Cement Concrete Chambers Near Hdfc Bank ,Aquem In Margao Constituency.
BOQ
| Sl. No. | Item Description |
| 1 | Cutting the bituminous road for laying the pipeline in trenches including labour, tools, etc. and disposing the excavated excess material from the trench to a distance of 1000 metres, including making level the trench surface by utilising the serviceable material to the level of the top surface of road, by compacting, watering ramming with rolling with road roller after completion of laying of pipe and refilling the trenches etc. complete as per the direction of engineer in charge.;By Manual Means :;District Road, State highways, National highway and roads of similar standards |
| 2 | Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts.; Mechanic al Compression CollarCoupling ;Nominal Dia in mm;100 |
| 3 | Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts.; Mechanical Compression CollarCoupling ;Nominal Dia in mm;150 |
| 4 | Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts.; Mechanic al Compression CollarCoupling ;Nominal Dia in mm;250 |
| 5 | Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts.; Mechanic al Compression Collar Coupling ;Nominal Dia in mm;300 |
| 6 | Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts.; Mechanic al Compression CollarCoupling ;Nominal Dia in mm;350 |
| 7 | Supplying stacking at site and conveying hoisting laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting bending welding procurement of plates gas cutting to required size rolling tack welding assembling in suitable length to form special welding on automatic machine and forming Vedge on both ends of special as required hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete;With 10 mm -12 mm thick plate; Tees bends reducers |
| 8 | Supplying at store or site of work including freight transit insurance carting loading unloading stacking etc. Ductile Iron double flanged manually operated Sluice valve generally confirming to IS 14846- 2000 non rising spindle type (soft seated) resilient seated with Body Bonnet of Ductile Iron of grade GGG40 or SG 400/12 400 /15 500/7 or equivalent grade as per IS 3896 part 2- 1985 and subsequent revisions Wedge fully rubber lined with food grade EPDM( WRAS approved) and seals of NBR spindle stem SS/AISI 410 and having glandless operation. The valve should be vacuum tight 100% leak proof with face to face dimensions as per IS14846-2000 or BS 5163- 89 or DIN 3202-F4. The valves shuld be coated with electrostatic Powder/ Epoxy Coating on both inside and outsideminimum 250 microns thickness of blue color RAL5017/5005 suitable for drinking water and shall have pocket less body passage. The flanges shall be Drilled as per IS: 1538 with latest amendments. The valve shall be supplied with Hand Wheel for operation (by-pass and gear arrangements for sizes above 400mm dia) and relevant Test & Guarantee certificates. TYPE P.N. 1.6 (Class A);Nominal Diameter in mm;100 |
| 9 | Supplying at store or site of work including freight transit insurance carting loading unloading stacking etc. Ductile Iron double flanged manually operated Sluice valve generally confirming to IS 14846- 2000 non rising spindle type (soft seated) resilient seated with Body Bonnet of Ductile Iron of grade GGG40 or SG 400/12 400 /15 500/7 or equivalent grade as per IS 3896 part 2- 1985 and subsequent revisions Wedge fully rubber lined with food grade EPDM( WRAS approved) and seals of NBR spindle stem SS/AISI 410 and having glandless operation. The valve should be vacuum tight 100% leak proof with face to face dimensions as per IS14846-2000 or BS 5163- 89 or DIN 3202-F4. The valves shuld be coated with electrostatic Powder/ Epoxy Coating on both inside and outsideminimum 250 microns thickness of blue color RAL5017/5005 suitable for drinking water and shall have pocket less body passage. The flanges shall be Drilled as per IS: 1538 with latest amendments. The valve shall be supplied with Hand Wheel for operation (by-pass and gear arrangements for sizes above 400mm dia) and relevant Test & Guarantee certificates. TYPE P.N. 1.6 (Class A);Nominal Diameter in mm;150 |
| 10 | Supplying at store or site of work including freight transit insurance carting loading unloading stacking etc. Ductile Iron double flanged manually operated Sluice valve generally confirming to IS 14846- 2000 non rising spindle type (soft seated) resilient seated with Body Bonnet of Ductile Iron of grade GGG40 or SG 400/12 400 /15 500/7 or equivalent grade as per IS 3896 part 2- 1985 and subsequent revisions Wedge fully rubber lined with food grade EPDM( WRAS approved) and seals of NBR spindle stem SS/AISI 410 and having glandless operation. The valve should be vacuum tight 100% leak proof with face to face dimensions as per IS14846-2000 or BS 5163- 89 or DIN 3202-F4. The valves shuld be coated with electrostatic Powder/ Epoxy Coating on both inside and outsideminimum 250 microns thickness of blue color RAL5017/5005 suitable for drinking water and shall have pocket less body passage. The flanges shall be Drilled as per IS: 1538 with latest amendments. The valve shall be supplied with Hand Wheel for operation (by-pass and gear arrangements for sizes above 400mm dia) and relevant Test & Guarantee certificates. TYPE P.N. 1.6 (Class A);Nominal Diameter in mm;200 |
| 11 | Supplying at store or site of work including freight transit insurance carting loading unloading stacking etc. Ductile Iron double flanged manually operated Sluice valve generally confirming to IS 14846- 2000 non rising spindle type (soft seated) resilient seated with Body Bonnet of Ductile Iron of grade GGG40 or SG 400/12 400 /15 500/7 or equivalent grade as per IS 3896 part 2- 1985 and subsequent revisions Wedge fully rubber lined with food grade EPDM( WRAS approved) and seals of NBR spindle stem SS/AISI 410 and having glandless operation. The valve should be vacuum tight 100% leak proof with face to face dimensions as per IS14846-2000 or BS 5163- 89 or DIN 3202-F4. The valves shuld be coated with electrostatic Powder/ Epoxy Coating on both inside and outsideminimum 250 microns thickness of blue color RAL5017/5005 suitable for drinking water and shall have pocket less body passage. The flanges shall be Drilled as per IS: 1538 with latest amendments. The valve shall be supplied with Hand Wheel for operation (by-pass and gear arrangements for sizes above 400mm dia) and relevant Test & Guarantee certificates. TYPE P.N. 1.6 (Class A);Nominal Diameter in mm;300 |
| 12 | Supplying at store or site of work including freight transit insurance carting loading unloading stacking etc. Ductile Iron double flanged manually operated Sluice valve generally confirming to IS 14846- 2000 non rising spindle type (soft seated) resilient seated with Body Bonnet of Ductile Iron of grade GGG40 or SG 400/12 400 /15 500/7 or equivalent grade as per IS 3896 part 2- 1985 and subsequent revisions Wedge fully rubber lined with food grade EPDM( WRAS approved) and seals of NBR spindle stem SS/AISI 410 and having glandless operation. The valve should be vacuum tight 100% leak proof with face to face dimensions as per IS14846-2000 or BS 5163- 89 or DIN 3202-F4. The valves shuld be coated with electrostatic Powder/ Epoxy Coating on both inside and outsideminimum 250 microns thickness of blue color RAL5017/5005 suitable for drinking water and shall have pocket less body passage. The flanges shall be Drilled as per IS: 1538 with latest amendments. The valve shall be supplied with Hand Wheel for operation (by-pass and gear arrangements for sizes above 400mm dia) and relevant Test & Guarantee certificates. TYPE P.N. 1.6 (Class A);Nominal Diameter in mm;350 |
| 13 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer incharge.; Double socketed specials such as bends collar couplings etc;Nominal Diameter in mm;100 |
| 14 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force toolshydraulic testing of joints etc complete as per the direction of the engineer incharge.; Double socketed specials such as bends collar couplings etc;Nominal Diameter in mm;150 |
| 15 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force toolshydraulic testing of joints etc complete as per the direction of the engineer incharge.; Double socketed specials such as bends collar couplings etc;Nominal Diameter in mm;200 |
| 16 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer incharge.; Double socketed specials such as bends collar couplings etc;Nominal Diameter in mm;300 |
| 17 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force toolshydraulic testing of joints etc complete as per the direction of the engineer incharge.; Double socketed specials such as bends collar couplings etc;Nominal Diameter in mm;350 |
| 18 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I; Nominal diamter in mm.; 100 |
| 19 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I; Nominal diamter in mm.; 150 |
| 20 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I; Nominal diamter in mm.; 250 |
| 21 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I; Nominal diamter in mm.; 300 |
| 22 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc . complete as directed as per IS:2685-1971 CLASS II & III.;Nominal diamter in mm.;350 |
| 23 | Construction of Reinforcement cement concrete chamber 90x90x150cm inside with 30 cms wall thickness in Cement Concrete 1:2:4 ( 1 cement : 2coarse sand:4 graded granitic or basaltic stone aggrt. 20mm. nominal size ) including centering /shuttering and TMT steel not less than 70kg/cu.m for sluice valves or equivalent main valves of suitable diameter with necessary excavation 15cms thick rubble packing and 10cms thick foundation concrete 1:3:6 ( 1 cement : 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 40 mm nominal size) and inside plastered with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement complete and as per standard drawing (rate is inclusive of earthwork excavationand all other materials and labour as per details above excluding cost of surface chamber cover) as directed by the Engineer in- charge. |
| 24 | Manufacturing Fabricating supplying and fixing in position over the main valve chamber. Two/three shutter M. S. cover manufactured out of 10mm thick M.S.plate size (1.2 mx1.2m)with bottom angles of size 65x65x6mm supporting parallel in the middle M.S. I beam of size 125x75 as per requirement & size of chamber with both side extended 20cm to 30cm to be fixed in the wall further supporting Diagonal angles and cross angles of size 65x65x6mm to both way perfectly hinged with 8nos of bar hinges capable to withstand heavy vehicle impact 4 nos. of handles made out of 12mm to 16mmdia bar bottom side locking arrangement for both main shutter as well a side shutter and welded 4 nos. of holdfast of L.S. 65x65x6mm to 40cm-long 4nos of bar hinges of high strength double angles and hold fast should be embedded in reinforcement concrete of 1:2:4 or richer mix incl. Transportation labour Priming coat painting etc. complete As per standard drawing. (10mm thick 1.2m x 1.2m M.S plate surface cover for R.C.C chamber size 90 cmx90cmx150cm) as directed by the Engineer incharge. |
| 25 | Construction of Reinforcement cement concrete chamber 120x120x170cm inside with 30 cms wall thickness in Cement Concrete 1:2:4 ( 1 cement : 2coarse sand:4 graded granitic or basaltic stone aggrt. 20mm. nominal size ) including centering/shuttering and TMT steel not less than 70kg/cu.mfor sluice valves or equivalent main valves of suitable diameter with necessary excavation 15cms thick rubble packing and 10cms thick foundation concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 40 mm nominal size) and inside plastered with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement complete and as per standard drawing (rate is inclusive of earthwork excavationand all other materials and labour as per details above excluding cost of surface chamber cover) as directed by the Engineer incharge. |
| 26 | Manufacturing Fabricating supplying and fixing in position over the main valve chamber. Two/three shutter M. S. cover manufactured out of 10mm thick M.S.plate size (1.5 mx1.5m)with bottom angles of size 75x75x8mm supporting parallel in the middle M.S. I beam of size 150x100 as per requirement & size of chamber with both side extended 20cm to 30cm to be fixed in the wall further supporting Diagonal angles and cross angles of size 75x75x8mm to both way perfectly hinged with 8nos of bar hinges capable to withstand heavy vehicle impact 4 nos. of handles made out of 12mm to 16mmdia bar bottom side locking arrangement for both main shutter as well a side shutter and welded 4 nos. of holdfast of L.S. 75x75x8mm to 40cm-long 4nos of bar hinges of high strength double angles and hold fast should be embedded in reinforcement concrete of 1:2:4 or richer mix incl. Transportation labour Priming coat painting etc. complete As per standard drawing. (10mm thick 1.5m x 1.5m M.S plate for surface cover for R.C.C chamber size 12 0cmx120cmx170cm ) as directed by the Engineer in charge |
| 27 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity including the cost of hire charges of mechanical grinder diesel operated electrical generator set suitable for supplying power for the grinder for cutting cost of grinding blades skilled work force fuel etc required for completion of job as per the direction of Engineer in -charge;Dia in mm;100 |
| 28 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity including the cost of hire charges of mechanical grinder diesel operated electrical generator set suitable for supplying power for the grinder for cutting cost of grinding blades skilled work force fuel etc required for completion of job as per the direction of Engineer in -charge;Dia in mm;150 |
| 29 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity including the cost of hire charges of mechanical grinder diesel operated electrical generator set suitable for supplying power for the grinder for cutting cost of grinding blades skilled work force fuel etc required for completion of job as per the direction of Engineer in -charge;Dia in mm;250 |
| 30 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity including the cost of hire charges of mechanical grinder diesel operated electrical generator set suitable for supplying power for the grinder for cutting cost of grinding blades skilled work force fuel etc required for completion of job as per the direction of Engineer in -charge;Dia in mm;300 |
| 31 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity including the cost of hire charges of mechanical grinder diesel operated electrical enerator set suitable for supplying power for the grinder for cutting cost of grinding blades skilled work force fuel etc required for completion of job as per the direction of Engineer in -charge;Dia in mm;350 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender