Tender For Providing Internal Electrification Work Of In 10 Nos Schools [1. Chebri Govt. Class-Xii School (One Unit Art & Craft Room), 2. Sonatala Govt. Class-Xii School (One Unit Art & Craft Room), 3. Ajagartilla High School (One Unit Art & Craft Ro
Tender Value
8.91 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
8 days left
EMD
17839
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khowai → Tripura
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Internal Electrification Work Of In 10 Nos Schools [1. Chebri Govt. Class-Xii School (One Unit Art & Craft Room), 2. Sonatala Govt. Class-Xii School (One Unit Art & Craft Room), 3. Ajagartilla High School (One Unit Art & Craft Room) Under Khowai R.D. Block/ 1. Dhakalsingbari School (One No Room) 2. Udan Bari Sab School (One No Room) Under Tulasikhar R.D. Block/ 1. Moharcherra Hs School (2 Unit Acr & 1 Unit Computer Room Under Teliamura Rd Block/ 1. Pm Shri West Santinagar High School (One Unit Library,1 Unit Computer Room & One Unit Science Lab). 2. Malay Sardar Para Sb School (One Unit Acr) Under Kalyanpur Rd Block/ 1. Ura Bazar School (One Unit Art & Craft Room, 2. Debendra Chowdhury English Medium School (Two Units Art & Craft Room) Under Padmabil Rd Block)].
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light / fan / exhaust fan / call bell point with 2 x 1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required.(TSR (IE)2021 SL.No.201) |
| 2 | Short point |
| 3 | Medium point |
| 4 | Long point |
| 5 | Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2 x 1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required.(TSR (IE)2021 SL.No.203) |
| 6 | Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2 x 1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required.(TSR (IE)2021 SL.No.204) |
| 7 | Wiring for circuit/Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required. (TSR (IE)2021 SL.No.205) |
| 8 | 2 x 1.5 sq.mm |
| 9 | 2 x 2.5 sq.mm |
| 10 | 2 x 4 sq.mm |
| 11 | 2 x 6 sq.mm |
| 12 | 4 x 4 sq.mm |
| 13 | 4 x 6 sq.mm |
| 14 | 4 x 16 sq.mm |
| 15 | Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/ surface including connection etc. as required.(TSR (IE)2021 SL.No.503) |
| 16 | 1 x 1.5 sq mm |
| 17 | 1 x 2.5 sq mm |
| 18 | Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12\\" x 12\\" having locking arrangement including CC work, holes on earth pipe etc. as required.(TSR (IE)2021 SL.No.701) |
| 19 | Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required.(TSR (IE)2021 SL.No.702) |
| 20 | Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required. (TSR (IE)2021 SL.No.706) |
| 21 | Proving and fixing / Drawing 4.06 mm dia (8 SWG) Copper wire on surface or in existing G.I / PVC / Polythene pipe for loop earthing as required.[TSR (IE)2021 Page 32 SL.No.707] |
| 22 | Providng and laying 15mm dia(medium gauge) G.I. pipe for drawing of 4.06mm (8SWG) dia G.I./ Copper wire for earth connection from earth electrodes etc. as required.(TSR (IE)2021 SL.No.710) |
| 23 | Supplying and Fixing of the following sizes PVC Conduit (medium gauge) on surface with all accessories etc as required.[ TSR (IE)2021 SL.No.602] |
| 24 | 19/20 mm dia |
| 25 | Supply and fixing of 32mm x 6 mm GI strip on walls/ floor of the building for horizontal/ vertical run including necessary spacers and porcelain insulators at regular intervals.[TSR (IE)2021 Page 33 SL.No.713] |
| 26 | Supplying and installation of Switch disconnector fuse unit (main switch) of the following ratings with all accessories including necessary connection etc. as required. (TSR (IE)2021 SL.No.1202) |
| 27 | 32 amps 240 volts DP main switch (rewireable) |
| 28 | 32 amps 415volts TPN main switch (rewireable) |
| 29 | Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required. |
| 30 | 32 amps 415 volts four strip Copper busbar chamber 4 ways of size (300mm x 240mmx80mm) |
| 31 | 63 amps 415 volts four strip Copper busbar chamber 4 ways of size (330mm x 280mmx100mm) |
| 32 | Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/ Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required.(TSR (IE)2021 SL.No.1208) |
| 33 | (2+4) / 6 way SPN MCB DB (Double door):- |
| 34 | (2+6) / 8 way SPN MCB DB (Single door) |
| 35 | (2+6) / 8 way SPN MCB DB (Double door) |
| 36 | (2+10) / 12 way SPN MCB DB (Single door):- |
| 37 | (2+10) / 12 way SPN MCB DB (Double door):- |
| 38 | 4 way Horizontal TPN MCB DB (Single Door) |
| 39 | Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required. (TSR (IE)2021 SL.No.1215) |
| 40 | 6 to 32 amps SP MCB |
| 41 | 6 to 32 amps FP MCB |
| 42 | Supplying &installation of isolators of following ratings in the existing MCB DB including connection etc. as required.[TSR (IE)2021 Page 44 SL.No.1217] |
| 43 | 40 amps DP isolator:- |
| 44 | Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc. as required. (TSR (IE)2021 SL.No.1502) |
| 45 | Supplying of 25 cm long ‘L’ hook made with 40mm x 6mm MS flat and fixing with necessary fasten nuts including finishing, painting etc. as required.(TSR (IE)2021 SL.No.1508) |
| 46 | Supplying & fixing of G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolt etc as required.(TSR (IE)2021 SL.No.1501) |
| 47 | 40 mm dia |
| 48 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt) (TSR (IE)2021 SL.No.1101) |
| 49 | Surface mounted integrated 20 watt LED batten with polycarbonate diffuser |
| 50 | Surface mounted box type batten suitable for single 18/20 watt integrated LED tube lamp (without lamp) |
| 51 | Surface mounted round/Square shaped 18/20 watt LED downlight with integral driver and high quality polycarbonate diffuser |
| 52 | Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/ diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt)(TSR (IE)2021 SL.No.1102) |
| 53 | 45 watt LED street light fixture with integral driver and secondary lens (IP 66) |
| 54 | Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required.(TSR (IE)2021 SL.No.1103) |
| 55 | 9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink. |
| 56 | 18 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- |
| 57 | 18/20 watt LED tube with integral driver and polycarbonate diffuser (50000 burning hours and minimum lumen output of 100 lm/watt):- |
| 58 | Supplying and fixing of the following modular accessories including necessary connection etc. as required.(TSR (IE)2021 SL.No.609) |
| 59 | 5 step fan regulator (2M) |
| 60 | Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required.(TSR (IE)2021 SL.No.602) |
| 61 | 25 mm dia |
| 62 | Supplying & fixing of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR) (ISI marked, BEE 1 star/minimum service value 4.0 m3/ min/W) (TSR (IE)2021 SL.No.802) |
| 63 | Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required(As Per TSR 2021, S.L No.1301) |
| 64 | 3 core 6 Sq mm |
| 65 | Supplying and laying of following sizes XLPE insulated PVC sheathed Aluminium conductor Un-armoured cable including necessary connection etc as required.(As Per TSR 2021, S.L No.1302) |
| 66 | 3 core 4 Sq mm |
| 67 | Drawing of armoured/un-armoured cable with proper saddeling etc as required:-(As Per TSR 2021, S.L No.1511) |
| 68 | Excavation of earth for cable trench of 800mm depth & 300mm width in all kinds of soil including back filling of cable trench with the excavated soil with 20cm layer of sand, 3.5 nos bricks per metre for protection including ramming, consolidating to the original shape as per dirrection of Site Engineer :-(As Per TSR 2021, S.L No.1510) |
| 69 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement- 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size):-(As per TSR-2021 Sl. No.1519) |
| 70 | Supplying and fixing of thermoplastic cable junction box with connectors suitable for following sizes cable : -(As Per TSR 2021, S.L No.1405) |
| 71 | 1.5 sqmm - 4 sqmm Cable:- |
| 72 | Supplying and fixing of Copper terminal ends (LUGS) - long barrel of following sizes.(TSR (IE)2021 SL.No.1402) |
| 73 | 2.5 sq mm |
| 74 | 4 sq mm |
| 75 | 6 sq mm |
| 76 | Supplying and installation of fuse unit kitkat/HRC/HBC of the following ratings in existing main switch/panel board including necessary connection etc as required. (TSR (IE)2021 SL.No.1203) |
| 77 | 32 amps kitkat porcelain fuse unit with base(rewireable) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender