Tender For special Repair To Tiles In Swimming Pool And Other Places, Diving Board And Other E/M Misc Work In Swimming Pool At Danapur Cantt
Tender Value
37.37 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
19 days left
EMD
74740
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Tiles In Swimming Pool And Other Places, Diving Board And Other E/M Misc Work In Swimming Pool At Danapur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises . |
| 2 | M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick jointless set and joint in neat cement slury and pointed in white or colour cement to match the shade of tile over and including 10mm thick rendering in CM 1:4 as backing coat to receive tiles complete all as specified and directed. |
| 3 | M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade if tile over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 4 | M&L for Johnson Endura or equivalent swimming pool tiles 247 mm x 122 mm x 8 mm thick coloured for floor / wall fixed with approved adhesive epoxy based using Ardex endura tiles fixing with adhesive compound including all necessary fittings accessories complete (internal cove, external angle junction of three external angle, internal angle of wall - floor junction etc, fixed with using Ardex Endura tiles adhesive compound and gap between tiles to be filled with ardex Endura grout complete all as specified and directed. |
| 5 | S&F in repair diving board 5 mtr F.R.P laminated with 99.7% water resistant polyester resin compositely reinforced with csm-450 chopped glass strand mat , Molded with anti slippery top laminated with wr-300 mat , thickness 2.5 \\" -1.5 \\" Width 20 \\" including MS Roller and fulcrum with hinge and fasteners complete all as specified and directed. |
| 6 | M&L for dismantling of GI pipe connections from the pressure sand filter plant capacity 85000 Ltr/hr, opening the manhole and removal/taking out the old filter media’s completely from pressure filter and depositing the same to a distance not exceeding 100 meters and re-fixing the pipes in the original existing position after replacement/ filling of unserviceable following items including replacement of gasket of manhole cover and necessary nuts and bolts as required complete all as specified and as directed. |
| 7 | Removing existing sand, gravel and filter media from pressure sand filter including handling complete all as specified and directed. |
| 8 | Disposal of removed filter media within premises including loading and shifting Complete all as specified and directed. |
| 9 | M&L for Cleaning of internal surface of filter shell and under-drain area by wire brushing and water washing Complete all as specified and directed. |
| 10 | M&L for Applying one coat epoxy primer and two coats food-grade epoxy paint to internal surface of filter Complete all as specified and directed. |
| 11 | M&L for Cleaning of external suface of filter including removal of rust, dust and loose paint complete all as specified and directed. |
| 12 | Applying one coat primer and two coats synthetic enamel paint to external surface of filter complete all as specified and directed. |
| 13 | Supply and filling of washed graded support gravel 40-60mm, layer thickness of 150mm complete all as specified and directed. |
| 14 | Supply and filling of washed graded support gravel 20-40mm, layer thickness of 150mm complete all as specified and directed. |
| 15 | Supply and filling of washed graded support gravel 12-20mm, layer thickness of 100mm complete all as specified and directed. |
| 16 | Supply and filling of washed graded support gravel 6-12mm, layer thickness of 100mm complete all as specified and directed. |
| 17 | Supply and filling of washed graded support gravel 2-6mm, layer thickness of 100mm complete all as specified and directed. |
| 18 | Supply and filling of coarse silica sand 1.0-2.0mm, layer thickness of 400mm complete all as specified and directed. |
| 19 | Supply and filling of fine silica sand 0.5-1.0mm, layer thickness of 500mm complete all as specified and directed. |
| 20 | Supply and filling of anthracite filter media 0.8-1.5mm, layer thickness of 500mm complete all as specified and directed. |
| 21 | Supply and replacement of under-drain nozzles including fixing complete all as specified and directed. |
| 22 | Cleaning and minor rectification of under-drain header and laterals complete all as specified and directed. |
| 23 | Labour charges for layer-wise filling, leveling and compaction of filter media complete all as specified and directed. |
| 24 | Initial backwashing of filter media and trial filtration run complete all as specified and directed. |
| 25 | Taking out MS / GI / CI / DI pipe any type including fittings with / without spigot and socketed end laid in trenches including removing of lead of Size 100 mm bore Note :- Old lead shall be re used. |
| 26 | S&F in replacement ductile iron pressure pipes 100 mm bore, class K7, centrifugally cast with spigot and socket ends as per following conforming to IS 8329/2000 with cement mortar lining inside the pipes with outside zinc coating suitable for push-on-joint (rubber gasket D jointing) in any length including DI specials as required at site confirming to IS 8329/2000 and all jointing materials and making good for disturbed surfaces of roads, path ways etc while laying the pipe line at site, site clearance for the route of pipe line, welding, excavation of pipe line,connections etc complete all as specified and directed. |
| 27 | S&F in replacement of Mild steel(MS) pipe of size 100 mm Dia of approved quality and thickness, with MS flanges welded at both ends, including nits,bolts,rubber gsakets, cutting, welding, grinding , painting with two coats of anti-corrosive primer and one coat of synthetic enamel paint, making good joints, hydraulic pressure testing and all labour, tools and materials etc complete all as specified and directed for the following sizes:- |
| 28 | Supply and fix in replacement Sluice Valves flanged of class 1.6 PN of size 100 mm Dia. Make : Kirloskar/Beer/Upadhyay |
| 29 | S&F in replacement DI specials such as bends (any type, radius or angle) tapers any type (Straight, bend, increase, decrease or double socket etc) tee pieces, single 'Y' branch, double branch cross (all sockets, socket and spigots, collars, cap plugs etc up to 150mm bore complete all as specified and directed. |
| 30 | Core cutting / drilling of Bldg Roof / Wall for passing of GI Pipe up to 40 mm dia including necessary machineries complete all as specified and directed. |
| 31 | S & F in repair cast iron butter fly valve of class 1.6 PN installed complete with ISI marked (IS-13095) of size 100 mm complete all as specified and directed. |
| 32 | S & F in repair cast iron foot valve of size 100 mm with and including flanges, gaskets,bolts,nuts,alignment, leak-proofing ,testing and commissioning complete all as specified and directed. Please Enable Macros to View BoQ information |
| 33 | S & F in repair cast iron foot valve of size 100 mm with and including flanges, gaskets,bolts,nuts,alignment, leak-proofing ,testing and commissioning complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender