Tender For Comprehensive Maintenance Of B/R Works In Certain Buildings Of Md Accn At Afs Amla
Tender Value
30 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
19 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Betul → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Of B/R Works In Certain Buildings Of Md Accn At Afs Amla
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M&L for Joint free, Non - skid coloured ceramic tiles; 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match set, over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 3 | M&L for Non - skid coloured ceramic tiles; 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in coloured cement to match the light shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 4 | All as per item No 03 above but in vertical surfaces as in skirtings, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in cement mortar 1:3 complete all as specified and directed. |
| 5 | M&L for digital coloured glazed ceramic tiles in vertical surfaces 350 x 250 x 7mm/ 450 x 300 x 7 to 8 mm thick, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles including 10mm thick backing coat in 1:4 cement mortar complete all as specified and directed. |
| 6 | M&L for yellow/ Red colour pre-polished rubber moulded chequred cement concrete tile 300mm x 300mm x 20-22mm thick with anti skid properties set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 7 | Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed. |
| 8 | M&L for Granite (Z Black) 18 to 20 mm thick table rubbed & polished in steps, jambs, cills, shelves etc including cutting of holes for fixing WHB in cement mortar 1:4 & pointing with white cement with marble dust using admixture of pigment to match with the shade of granite over and including 15mm thick screed in CM 1:4 complete all as specified and as directed . |
| 9 | Dismantling of Asbestos cement (corrugated or semi corrugated) sheets as in roof covering complete all as specified and directed. |
| 10 | Fixing only 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with `L' type or `J' type or cranked hook bolts complete all as specified and as directed. |
| 11 | M&L 6mm thick asbestos cement,corrugated or semi-corrugated sheet in roof, walls etc fixed with `L' type or `J' type or cranked hook bolts complete all as specified and as directed |
| 12 | M&L for 6mm thick asbestos cement two piece, adjustable serrated ridge for corrugated sheets in roofs, walls etc fixed with `L' type or `J' type or cranked hook bolts complete all as specified and as directed |
| 13 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 14 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength 550 Mpa as in roof covering /cladding to wall /roof covering fixed with self tapping screw complete all as specified and directed. |
| 15 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 16 | Dismantling of wall, display board/ceiling board fibre, pulp,insulation etc or insulation board /slab/wool of any thickness including cover fillets complete all as specified and directed. |
| 17 | S&F size of grid 605X605mm Anodised aluminium snap grid frame work for false ceiling all as specified and directed with hangers 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceiling cleat of GI flat 40x3mm and 60mm long and expension holed fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 18 | M&L for 4mm thick non asbestos fibre cement building board fixed in cement ceiling flat or sloping to GI/aluiminium frame work complete all as specified and directed. |
| 19 | S&F in repairs for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinet ,wall hung type complete all as specified and directed. |
| 20 | S&F in repairs for 12mm thick fire impact and Termite-Resistant MDF (Medium density fibre board) boards with smooth surface, surable and eco friendly use for Wall Panels, Kitchen Cabinets, Wardrobes, Storage Units, Partitions and more fixed with screws to timber frame work, wall hung type complete all as specified and directed. |
| 21 | Taking down PVC chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 22 | Taking down chowkats or frames with shutters any type exceeding 1.5 Sqm and not exceeding 4.0 Sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 23 | Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 sqm each complete all as specified and directed. |
| 24 | S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 25 | S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 26 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and directed. |
| 27 | S&F 35mm thick 2nd class hardwood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, but divided in to square with plain, chamfered or rounded, mitred and rebated sash bar, any number fitted with cut and mitred beads for securing glass etc, size of member of shutter as specified in SSR Part-I section 8 cluase 8.20 (a) supplied and fitted to chowkats complete all as specified and directed. |
| 28 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 29 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed. |
| 30 | S&F in repairs 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 31 | S&F in repairs 150mm long (ISI marked) aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 32 | S&F in repairs 150mm long size (ISI marked) extruded aluminium alloy handles, cast type anodised complete all as specified and directed. |
| 33 | S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fix complete all as specified and directed. |
| 34 | M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane including hacking out broken glass pane complete all as specified and directed. |
| 35 | S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 36 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 37 | M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 38 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 39 | M & L for rolled mild steel angles conforming to Fe 410-w (Gde-E-250) quality A, of any size as in frame work for door frame including flat iron hold fasts, all cutting, welding, finishing, etc., complete all as specified and directed. |
| 40 | M&L for preparation new painted steel surfaces of any description over 10cm width or grith not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide and zinc chrome complete all as specified and as directed. |
| 41 | M&L for cutting holes in brick walls built in cement mortar for inserting hold fast and making good dismantled portion in cement concrete 1:2:4 type B-1, depth exceeding half brick but n. exc one brick complete all as specified and directed. |
| 42 | S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 43 | S&F in Repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed. |
| 44 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, traight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and directed. |
| 45 | S&F 4.00 mm thick sheet glass selected quality and glazing in squares not exceeding 0.50 sqm in each pane of aluminium door / window complete all as specified and directed. |
| 46 | S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor,Overall length of cover plate 150mm complete all as specified and directed. |
| 47 | S&F in repairs door strip with rubber sheet 4mm thick, 12cm wide as in door fixed with nails complete all as specified and directed. |
| 48 | S&F in repairs decorative mild steel coloured curtain rod of 20 mm dia powder coated approved pattern & design including side cups & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs complete all as specified and directed. |
| 49 | M&L for welding in repair exc 2.5cm but n exc 5cm in length, thickness of metal n. exc 6 mm complete all as specified and directed. |
| 50 | M&L for PCC 1:2:4, type B-0, (using 12.5mm graded stone aggregate) as in filling hollow sections of pressed steel door frames, cills, bed blocks, for embedding hold fasts etc, complete all as specified and directed. |
| 51 | S&F in repairs Anodised aluminium grill (Dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, as per requirement complete all as specified and directed. |
| 52 | S&F in repair Vitreous china squatting pan, Orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern) including connection to trap, flushing pipe to squatting pan, anti-syphonage pipe, etc., and making good to floor complete all as specified and directed. |
| 53 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white including seat & cover, flush pipe, connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed. |
| 54 | S&F PVC(SWR) 110mm dia S trap including connecting to out let with solvent cement complete all as specified and directed. |
| 55 | M&L in repairs for PVC (SWR) nahani trap, plain with grating suitable for 75mm dia outlet pipe including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with solvent cement complete all as specified and directed. |
| 56 | S&F in repair 10 litre capacity PVC valveless syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed. |
| 57 | S&F in repairs PVC syphon with rod including PVC handle with adjustable lever (flushing kit) suitable for 10 litre capacity PVC flushing cistern complete all as specified and directed. |
| 58 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm fixed to pipes and valves complete all as specified and directed. |
| 59 | S&F in repairs vitreous china wash hand basin white flat back size 550mmx400mm excluding taps waste chain and plug and percelain stopper including two coats of synthetic enamel paint over coat of red oxide primer on exposed surfaces of breckets waste coupling brass CP 32 mm bore with long screwed shanks bedded in red lead cement and other end fixed and pillar taps 15 mm bore cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks screwed and removing debris out of MoD land complete all as specified and directed. |
| 60 | Taking up or down 15mm dia bore GI tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 61 | Taking up or down 20mm dia bore GI tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 62 | S&F 15mm dia bore GI tubing medium grade, galvanised with all fittings fixed to wall and ceiling or laid in floors complete all as specified and directed. |
| 63 | S&F 20mm dia bore GI tubing medium grade, galvanised with all fittings fixed to wall and ceiling or laid in floors complete all as specified and directed. |
| 64 | S&F in repairs 15 mm bore bib taps cast copper alloy with Chromium plated crutch or butterfly handle scrwed, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 65 | S&F in repair 15mm bore stop valves fancy type, chromium plated screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions fixed complete all as specified and directed. |
| 66 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed on the wall using wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 67 | S&F Stainless steel tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges fixed on the wall using wooden plugs with chromium-plated brass screws and cup washers complete all as specified and directed. |
| 68 | M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A complete all as specified and directed. |
| 69 | S&F in repair straight glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 Cm wide with chromium plated bracket guard and railing 60 Cm long complete all as specified and directed. |
| 70 | S&F in repair corner glass shelf assembly consisting of 5 mm thick toughened glass with CP railing and brass brackets complete all as specified and directed. |
| 71 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 72 | S&F in repairs Brass chromium plated shower rose 150mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 73 | S&F in repair brass chromium plated overhead shower 125mm dia round shape with swivel joints complete all as specified and directed. |
| 74 | S&F in repair Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour (Minimum weight 40gms) complete all as specified and directed. |
| 75 | S&F in repairs 32mm Waste fitting, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 76 | S&F in repairs 32mm Waste fitting, brass, chromium plated for glazed ware sinks, basins, etc(sink coupling) with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 77 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 78 | S&F in repair 15mm dia Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete including taking down old rusted tap complete all as specified and directed. |
| 79 | S&F in repairs Toilet paper holder of brass, chromium plated or stainless steel with flat recessed type stainless steel Complete all as specified and directed. |
| 80 | S&F in repairs Soap dish, stainless steel, approximate size 160 x 160 x 90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 81 | S&F in repairs Mirror cabinet of PTMT alloy of size 400mm x 500mm, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 82 | S&F in repairs collapsible waste pipe of size 31/32 x 800 mm, fixed to waste fittings ,complete all as specified and directed. |
| 83 | S&F in repair 15mm bore brass chromium plated basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 84 | S&F in repair 15mm bore brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 85 | S&F 100mm dia grating doom of stainless steel (Minimum weight 25gms) complete all as specified and directed. |
| 86 | S&F 40mm unplasticide PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceiling or in floorsincluding all fittings like bend, T, elbow etc complete all as specified and as directed |
| 87 | S&F in repairs plastic water closet seat cover, closed pattern with flat bottom and cover fixed with mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 88 | S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall complete all as specified and as directed. |
| 89 | S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall complete all as specified and as directed. |
| 90 | S&F in repairs 75mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 91 | S&F in repairs 110mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 92 | S&F in repairs 12\\" long Cast Iron wash basin brackets, L shape including necessary fastener and steel plugs for fixed to wall complete all as specified and directed. |
| 93 | S&F in repair stainless steel plate rack of size approved pattern and size 0.90 x 0.60m and thickness of sheet 1mm complete all as specified and directed. |
| 94 | Demolition of plain cement concrete as in ground floor and paving not exceeding 15 cm thickness below or above ground level (unreinforced concrete) including disposing of debris off the premises complete all as specified and directed. |
| 95 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base 75mm thick, finished fair & even complete all as specified and directed. |
| 96 | M&L for 100 mm thick; Plain Cement Concrete (PCC) 1:2:4 Type B-2 using 40mm graded stone aggregate, as in top layer of the floor, pavings etc., including finishing the surface by spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all specified and directed. |
| 97 | M&L for 75 mm thick; PCC 1:3:6 type C2 using 40mm graded stone aggregate, as in plinth protection, including finishing the surface by spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green and making saucer drain complete all as specified and directed. |
| 98 | M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A complete all as specified and directed. |
| 99 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing the debris outside the defence land all as specified and directed. |
| 100 | M&L for brick work with Fly ash brick 75 kg/cmsq compressive strength. Modular size , is straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 101 | Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 102 | M&L for rendering 10 mm thick on fair faces of brick or stone surfaces of walls in cement mortar 1:6 finished even and smooth without using extra cement with and including sagol finish complete all as specified and directed. |
| 103 | M&L for (10+5)mm thick for rendering fair faces of brick work or Concrete surface in two coats 10mm thick in CM(1:6) as under coat 5mm thick CM (1:4) as finishing coat in two separate layer mixed with Liquid water proofing compound finished even and smooth without using extra cement at any height including necessary scaffolding, ladder, formwork etc complete all as specified and as directed. Note: Water proofing compound shall be measured and paied seperately. |
| 104 | M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk white primer complete all as specified and directed. |
| 105 | M&L for preparing newly plastered surfaces of walls and applying two coat of cement base paint over a coat of alkali-resistant primer complete all as specified and directed. |
| 106 | M&L for preparing of old external decorative surface of walls and applying one coat of cement base paint, including filling cracks with exterior wall care putty wherever necessary complete all as specified & directed. |
| 107 | M&L for preparing of old decorative distempered internal surface of walls and applying one coat of distemper oil emultion complete including filling cracks with wall care putty wherever necessary complete all as specified & directed. |
| 108 | M&L for preparing of old decorative surfaces of walls and applying one coat of white wash on walls including cornices etc complete including filling cracks with wall care putty wherever necessary complete all as specified & directed. |
| 109 | M&L for preparing of old decorative surface of ceilings and applying one coat of white wash on ceiling including cornices etc complete including filling cracks with wall care putty wherever necessary complete all as specified & directed. |
| 110 | M&L for complete removal existing treatment of old decorative surface of walls (i.e. white wash, colour wash, cement base paint, synthetic enamel paint etc.) and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete including filling cracks with wall care putty wherever necessary complete all as specified & directed. |
| 111 | M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed. |
| 112 | M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed. |
| 113 | M&L for Mixing & applying two coat of Smart Care Damp Block 2K/Dr. Fixit Pidifin 2K, Make : Asian Paints/Dr. Fixit on wall/floors of bricks/concrete/stone masonry surface as per manufacturer's directions including scaffoldings complete all as specified and directed. |
| 114 | M&L for repairing of R.C.C projections, chajjias, roofs, facia, columns, beams etc., in patches not exceeding 3 Sqm in each patch by necessary preparation, Scrapping, cutting, chiseling Dusting and cleaning exposed reinforcement, surfaces of damaged, loose R.C.C surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforced with welded mesh (If Reqd) with or without facia and finished with 15 mm thick cement and sand mortar (1:4) using coarse sand and thickness of R.C.C member n. exc 75mm including necessary form work at any height including dismantling of damaged concrete complete all as specified and directed. Note : welded mesh will be measured and paid separately. |
| 115 | S&F in repairs 15mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm - 210 gms/25mm-455gms/40mm - 690 gms) complete all as specified and directed. |
| 116 | S&F in repairs 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm - 210 gms/25mm-455gms/40mm - 690 gms) complete all as specified and directed. |
| 117 | S&F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 118 | S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 119 | S&F in repairs PVC water tank cover with thread suitable for 500 ltrs tank, fixed with and including hinge complete all as specified and directed. |
| 120 | M&L for running welding of thickness n'exc 6mm in repairs complete all as specified and directed. |
| 121 | S&F in reparis stainless steel F type glass shelf adjustable bracket of size 6\\" of length complete all as specified and directed. |
| 122 | Demolition of reinforced cement concrete (ie manhole cover) in ground floors not exc 15 cm thick (below or above ground leave) reinforcement cut as recquired to facilitate demolition complete all as specified and as directed. |
| 123 | M&L for provididng precast reinforced cement concrete 1:2:4 ytpe B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man hloes etc,) chullah hoods, chajjas set in cement mortar 1:4 incuding necessary form work complete all as specified and directed. |
| 124 | M&L for mild steel TMT bars, 10mm dia and ove, cut to length bent to shape required, including cranking bending spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 125 | M&L for handles, rungs, brackets etc. and mimilar articals made out of mild steel round bars 10mm dia and over bent to bent to shape required complete all as specified and directed. |
| 126 | Dismantling water tanks of capacity exc 250ltrs but n.exc 500ltrs complete all as specified and directed. |
| 127 | Dismantling water tanks of capacity exc 500ltrs but n.exc 1000ltrs complete all as specified and directed. |
| 128 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top),of capacity 500ltrs hoisted and fixed in position complete all as specified and directed in SSR Part I |
| 129 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top),of capacity 1000ltrs hoisted and fixed in position complete all as specified and directed in SSR Part I |
| 130 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain shutter of 30mm size for door comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws for fixing including all fittings such as handle, tower bolt hasp staple, hinges etc complete all as specified and directed. |
| 131 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain shutter of 30mm size for glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, but divided in to square with plain, chamfered or rounded, mitred and rebated sash bar, any number fitted with cut and mitred beads for securing glass etc comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws for fixing including all fittings such as handle, tower bolt hasp staple, hinges, SS wire mesh etc complete all as specified and direction. |
| 132 | Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender