Tender For Periodical Services And Day To Day Maintenance To Certain Bldgs Works At Site C , 3 Afsr, Kahikuchi, 8Lu, Mes Area Under Ge(Af) Borjhar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Jul 2026
16 days left
EMD
76000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services And Day To Day Maintenance To Certain Bldgs Works At Site C , 3 Afsr, Kahikuchi, 8Lu, Mes Area Under Ge(Af) Borjhar
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Taking down cement plaster in any description on brick or stone wall etc incl racking out joints.hacking for key scrubbing down with water etc. all as specified and as directed by Engr-in-Charge. |
| 2 | M&L for applying one coat of white wash to old decorated (white washed) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 3 | M&L for applying one coat of white wash to old decorated (white washed) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 4 | M&L for applying one coat of oil bound distemper to old decorated (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 5 | M&L for applying two coats of oil bound distemper to old decorated (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 6 | M&L for complete removal of existing treatment of old wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 2 to 3 mm thick BIRLA/JK water proof wall care putty complete all as directed by Engr-in-charge. |
| 7 | M&L for applying one coat of oil bound distemper to old decorated (distempered) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 8 | M&L for applying one coat of cement base paint to old decorated (cement base painted) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) painting shall be applied post curing , curing done shall be complete all as specified and directed by Engineer -in-Charge. |
| 9 | M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge. |
| 10 | M&L for applying two coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge. |
| 11 | M&L for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge. |
| 12 | M&L for applying two coat of synthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge. |
| 13 | M&L for applying one coat of synthetic enamel paint to old painted brick, stone, concrete, asbestos cement or plastered surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge. |
| 14 | Material & labour for preparing old exterior emulsion paint surfaces of walls by washing, rubbing down stopping of painted surfaces and applying one coat of exterior emulsion paint weather coat, complete all as specified and as directed. |
| 15 | M&L for 15mm thick rendering in cement mortar (1:6) to fair faces of brick or concrete wall surfaces finished even & smooth without using extra cement all as specified and directed by Engineer -in-Charge. |
| 16 | M&L for 5 mm thick rendering in cement mortar (1:3) to fair faces of brick or concrete ceiling surfaces finished even & smooth without using extra cement all as specified and directed by Engineer -in-Charge. |
| 17 | M&L rendering 15 mm thick cement plaster on fair face of brick work or concrete surface in CM (1:4) with water proofing compound mixed @ 3% by weight of cement complete all as specified and as directed. ( Note -W.P.C. shall be measured and paid separetly . ) |
| 18 | Supply only integral water proofing compound all as specified and as directed. |
| 19 | M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surface complete. |
| 20 | M&L for preparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer applied complete all as specified and directed by Engineer -in-Charge. |
| 21 | M&L for preparation of newly plastered wall surfaces and applying 3 mm thick on wall putty complete all as specified and directed by Engineer -in-Charge. |
| 22 | M&L for preparation of newly plastered wall surfaces and applying 3 mm thick on ceiling putty complete all as specified and directed by Engineer -in-Charge. |
| 23 | M&L for applying two coat of cement based paint to newly plastered surface of wall over a coat of primer including preparation complete all as specified and as directed. |
| 24 | M & L for writing letter/number up to 05 letters or figure (Block, Roman, Italic or Indian ,stop, commas, shortline, dashes, hyphens, brackets etc) in Synthetic enamel paint n.exc. 30 cm high on base paint of black colour of area exc 0.0625sqm but not exc 0.122 sqm at any heiht of building (up to G+2) complete. |
| 25 | Dismantling water tanks of any description exc. 250 ltrs and n. exc. 500 ltrs capacity and removing from site. |
| 26 | Dismantling water tanks of any description exc. 500 ltrs and n. exc. 1000 ltrs capacity and removing from site. |
| 27 | S&F of 500 ltr rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 28 | S&F of 1000 ltr rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 29 | M&L for cleaning of building service tanks PVC of OMQ & SMQ area of exe. 250 litres and not exe. 500 litres capacity situated at various places by involving the following four (4) stages of cleaning processshall be carried out as given below:--- a) De-watering PVC tank through wash out pipe completely. b) Total removal of sludges completely .c) Cleaning of walls,ceiling and floor & inspecting for craks if any completely.d) Antibacterial treatment of inside of tank to make it complete bacteria free and completely.Note:- (1) Entire T&P should be arranged by the contractor at their own.Only electric power & water shall be supplied by MES at stipulated rate. (2) (a) Date of cleaning, should be written over the outer surface of tank by synthetic enamel paint with lettering not less than 100 mm height.Cost of the same is deemed inclusive in the quoted unit rate of cleaning of tank. |
| 30 | All as per Item No.29 above but capacity of tank exc. 500 litres and not exc. 1000 litres. |
| 31 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness, including cover fillets, complete all as specified & directed. |
| 32 | M&L for Non asbestos fibrecement building boards 4-6mm in thickness fixed orlaid/ inserted to timber/GI/Aluminium frame work with screws along with Anodised aluminium snap gridframe work for false ceiling Size of grid 605 x 605mm all as specified and directed. |
| 33 | Dismantling AC/CI sheet (Corrugated, Semi corrugated etc) as in roofs etc including ridges, complete all as specified & directed. |
| 34 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed . |
| 35 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding/valley gutter to wall, fixed with self tapping screws, complete, all as specified and directed . |
| 36 | S&F in repairs Mirror cabinet (PTMT) with mirror size 350 mm x 450mm fixed on wall with cadmium plated brass screws, complete all as specified & directed. |
| 37 | S&F in repairs tubular towel rail, aluminium anodized, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified & directed. |
| 38 | S & F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 39 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified & directed. |
| 40 | S&F in repairs vitreous china urinal, half stall type, white including providing & fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia, complete all as specified & directed. |
| 41 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified & directed. |
| 42 | S&F in repairs waste coupling of PTMT (half or full threaded) suitable for WHB/Sink, bore dia of discharge pipe 32mm (Minimum weight 45gms), complete all as specified & directed. |
| 43 | S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle, complete all as specified & directed. |
| 44 | S&F in repairs 15mm bore Stop valve, cast copper alloy, fancy type chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union, complete all as specified & directed. |
| 45 | S&F in repairs 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms complete all as specified & directed. |
| 46 | S&F in repairs 15 mm bore bib tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed. |
| 47 | S&F in repair pillar tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm 110gms) |
| 48 | S&F in repairs 15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes, complete all as specified & directed. |
| 49 | S&F in repair for Brass chromium plated shower rose 125mm size with arm 15 mm bore complete all as specified and directed by Engineer-in-charge . |
| 50 | S & F 15/20mm bore ball/float valve brass valve high pressurewith polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete. |
| 51 | S & F 25mm bore ball brass valve high pressurewith polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete. |
| 52 | S&F in repairs PVC connection 15 mm dia 450/600mmm long as required with 2 Nos PVC check nuts with washer complete all as specified and directed. |
| 53 | S&F in repairs lid for polyethylele water storage tank exc. 250 litres and n.exc.500 litres including fixing PTMT nut/binding wire complete all as specified and directed. |
| 54 | S&F in repairs lid for polyethylele water storage tank exc. 500 litres and n.exc.1000 litres including fixing PTMT nut/binding wire complete all as specified and directed. |
| 55 | S&F in repair for. Swivel shower of PTMT with arm 15 mm size, 195mm long with bend of 45degree with flange of any colour.(Minimum weight 40gms) complete. |
| 56 | S&F in repair 32mm dia PVC waste pipe for WHB & kitchen sink 80cm long with union complete all as specified and directed. |
| 57 | S&F in repair waste coupling brass chromium plated 100mm dia for kitchen sink complete all as specified and directed. |
| 58 | S&F in repairs cp decorative curtain rail, 20mm bore including brackets complete all as specified & directed. |
| 59 | S&F in repairs in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600mm long |
| 60 | S&F in repairs Toilet paper holder , viperous china box type complete all as specified & directed |
| 61 | S & F in repairs hand shower (health faucet) ABS body mile steel chromium plated for 15mm dia, 1.25meter long flexible tube and ABS wall hook including making connections and fixed in postion complete in all respect as specified. |
| 62 | S&F in repairs 15mm dia of fancy type chromium plated Angle stop valvesone way /2 way angle cock cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions and fixed complete all as specified and directed. |
| 63 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified & directed. |
| 64 | M&L for glazed ceramic tiles (coloured)of size 350mm x 250mmx6-7mm /450x 350x6 to 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar (1:4), complete all as specified and directed. |
| 65 | M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6), complete, all as specified & directed. |
| 66 | M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar (1:4), complete all as specified & directed. |
| 67 | M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6), complete all as specified and directed. |
| 68 | Taking up or down steel tubing 15 mm bore and connections including cleaning for refixing or removing from site. |
| 69 | Taking up or down steel tubing 20 mm bore and connections including cleaning for refixing or removing from site. |
| 70 | Supplying and laying of 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.d. |
| 71 | Supplying and laying of 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed. |
| 72 | S &F of Brass Elbow 16/20 mm bore complete all as specified |
| 73 | S &F ofBrass Elbow (3/4 X ½) 20 mm bore complete all as specified |
| 74 | S &F of Brass Tee 16/20 mm bore complete all as specified |
| 75 | S &F of 16/20 mm bore Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified |
| 76 | S &F of 16/20 mm bore Female Brass Threaded Adaptor (FTA/ FBTA)complete all as specified |
| 77 | S &F in repairs of 15/ 20/25 mm bore gate valve complete all as specified |
| 78 | S&F in repair for stainless steel plate rack for kitchen utensil made out of 0.50 mm thick stainless sheeet and over all size 600x750mm and 250 mm depth fixed to wall with screws complete all as specified and as directed. |
| 79 | S & F in repairs squatting pan vitreous china orrisa pattern of Size 580mmx440mm \\"white\\" with integral foot rest (Excluding flushing cistern and flush pipe) including provision of cement concrete bedding, connection to trap and to flushing pipe, anti-syphonage pipe etc complete making good to floor complete |
| 80 | S&F in repairs in repairs Grating doom 100-150mm dia with waste hole or without hole of PTMT and CP complete all as specified & directed (Minium weight 40 gm) |
| 81 | Demolition of Concrete of any description and in any position any depth not otherwise specifically provided forcomplete all as specified and directed |
| 82 | M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified and as directed. |
| 83 | M&L for Prepolished chequered cement concrete tiles with grey cement & pigment of size 30cmx30cmx20 to 22mm thick set & jointed with cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:6) and pointed with grey cement complete all as specified and as directed by Engineer-in-Charge. |
| 84 | M & L for rendring 15mm thick cement plaster with in cement sand mortar (1:3) on brick/ concrete surface over two coat of two component of cementitious and flexible acrylic coating of Tapecrete RTU / Piddifin 2k or equivalent over the cleane and moist surface in opposite direction to form a seamless layer two make the surface water resistance coating as per manufacturer instruction as in sunken slab complete all as specified and as directed by Engr-In-Charge. |
| 85 | M & L for cleaning to concrete/plastered surfaces of sunken slab and applying water proofing treatment in the following courses :-- (a) Applying bitumen primer @ 0.80 kg/sqm. (b) Applying a tack coat of bitumen 85/25 cofirming to IS-702 @ 1.20kg/sqm. (c) Supplying & laying 150 micron thick polyethylene film of Superior quality. (d) Applying a tack of bitumen 85/25 @ 1.20kg/sqm over polythene film incl GI spout pipe of size of 40mm dia and 250 mm long fixed in desired position complete all as specified and as directed by Engineer –in- charge. |
| 86 | M & L cement concrete ( 1:4:8) type D-2, using 40mm graded stone aggregate as in filling sunken floor, surface finished even and fair without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 87 | Dismantling CI/AC/PVC (SWR) pipes & fittings of any description fixed to wall/laid in trenches including making good disturbed portion of wall floor etc. |
| 88 | S & F 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints , laid in trenches or in floor complete all as specified and directed by Engineer-in Charge. |
| 89 | S & F in repairs 110 mm dia PVC (SWR) bends any radius, with access door complete all as specified and directed by Engineer-in Charge. |
| 90 | S & F in repairs 110 mm dia PVC (SWR) bends any radius, without access door complete all as specified and directed by Engineer-in Charge. |
| 91 | S & F in repairs PVC (SWR) junction single (single T) equal or unequal 110mm bore, without access door complete all as specified and directed by Engr-in-charge. |
| 92 | Taking down floor trap/nahani trap of any description any size and making good to disturbed portion with cement concrete type B-1 1:2:4 with water proofing compound complete all as specified and directed. |
| 93 | M & L 50-75mm outlet dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed. |
| 94 | S & F 50-75 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints , laid in trenches or in floor complete all as specified and directed by Engineer-in Charge. |
| 95 | S & F in repairs 75 mm dia PVC (SWR) bends any radius, with access door complete all as specified and directed by Engineer-in Charge. |
| 96 | S & F in repairs50 - 75 mm dia PVC (SWR) bends any radius, without access door complete all as specified and directed by Engineer-in Charge. |
| 97 | M & L reparing of RCC projection chajja, roof, roof facia, celing by scrapping, cutting derusting and cleaning exposed reinforcement surface of damaged loose RCC surface and applying neat cement slurry @3 Kg/Sqm and filling the surface with cement plaster 1:3 one or two layers as reqd or PCC 1:2:4 as directed by engr in charge with or withour facia and smooth finished and smooth edges incl two coat of finished to mathch with the existing surface at any height and any height and in any situation including necessary form work complete all as specified. |
| 98 | Taking down shutter of any description not exceeding 1.00 Sqm each complete all as specified and directed. |
| 99 | All as per Serial Item No 100.00 here-in-above but exceeding 1.00 Sqm and not exceeding 2.00 Sqm each complete all as specified and directed. |
| 100 | Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each, removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed. |
| 101 | All as per Serial Item No 100.00 here-in-above but exceeding 1.5 Square Metre and not exceeding 4 Square Metre each complete all as specified and directed. |
| 102 | Taking down aluminium window frame with shutters (Without taking off shutters from frame) not exceeding 1.5 Sqm each complete all as specified and directed. |
| 103 | Taking down aluminium door frame with shutters (Without taking off shutters from frame) exc 1.5 Sqm not exceeding 4.00 sqm each complete all as specified and directed. |
| 104 | Demolition of brick work or stone / boulder masonary built in CM including all quoins, arches, pillars, etc but excluding ashlar, facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed by Engineer-in-Charge |
| 105 | M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 106 | M&L for PCC (1:2:4), type B1 using 20 mm graded crushed stone aggregate as in hold fast, bed plate etc including necessary form work complete all as specified and directed. |
| 107 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed by Engineer-in-Charge |
| 108 | S&F Framed work of mild steel as in grills, grating with guard bars etc ends of bars shouldered or riveted or forged into spike conforming to Fe-290-0 or Gde E-165 complete all as specified and as directed |
| 109 | S&F Mild steel work as in band, straps, supports for RWP, clamps, hold fasts, wall ties, hooks & pintle hinges and similar small articles conforming to Fe-290-0 or Gde E-165 complete all as specified and as directed by Engineer-in-Charge |
| 110 | Supply & Fixing 2nd class hard wood plain, soild straight chowkats and frames of wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge |
| 111 | S&F for 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified and directed. |
| 112 | S&F Glazed and skelton shutters, 30-35 mm thick of Second class hard wood open rebated and prepared to receive glass, gauge etc without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), chemically treated complete all as specified and directed. |
| 113 | All as per Serial item No .114 here-in-before but 30 mm thick as in window and ventilator etc are provided with stiles and rails, sash bar all as specified in SSR Part I, section 8, clause 8.24 (b), chemically treated, complete all as specified and directed by Engineer-in-Charge. |
| 114 | M&L for preparation of new or untreated painted wood and wooden based surfaces of any description not other wise described over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 115 | S&F aluminium anodised powder coated frame of standard section as directed or as perTD of CE(AF) shillong Zone for doors, windows, ventilators of any colour as approved with one or more rebates including joining cleat, etc for fixing etc. complete all as specified & as directed. |
| 116 | S&F aluminium anodised powder coated door shutters, with top rail of size 47.62mm x 44.45mm, intermediate rail 100mm x 44.5mm, bottam rail 88mm x 44.5mm, style size 44.45mm x 47.52mm, including necessary joining cleats, glazing clips, rubber neoprene packing/ rubber gasket, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified & directed. |
| 117 | S&F aluminium anodised powder coated window and ventilator shutters, sliding type with size of sliding shutter style 39mm x 20mm, top rail size 39mm x 20mm and bottom rail size 41mm x 20mm, joining cleats, glazing clips, rubber packing/rubber gaskets, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) , complete, all as specified & directed. |
| 118 | S&F in Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 119 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 120 | S&F Mild Steel Butt hinges, heavy weight, cold rolled, of size 100 mm complete all as specified and directed. |
| 121 | S&F Mild Steel Butt hinges, heavy weight, cold rolled, of size 75 mm complete all as specified and directed. |
| 122 | S&F 200 mm long mild steel barrel tower bolt, stove enameled black with bright bolt complete all as specified and directed. |
| 123 | S&F 100/150 mm long as required mild steel barrel tower bolt, stove enameled black with bright bolt complete all as specified and directed. |
| 124 | S&F Mild steel pressed handle, oval type, stove enameled black, 150 mm size complete all as specified and as directed. |
| 125 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified and as directed. |
| 126 | S&F 4 mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square not exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. |
| 127 | S&F 5.5mm thick sheet glass, ordinary quality, glazing with oil putty or with wooden beads/ aluminium frame, area exceeding 0.50 Sqm but not exceeding 1.0 Sqm each pane with and including solar control film 25 micron reflective type (greater sun control or equivalent) complete all as specified and directed. |
| 128 | S&F 3mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square not exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. |
| 129 | S&F 3mm thick obscured or frosted sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. |
| 130 | Easing of wooden door/windows wooden/iron including replacement including changing of hinges tower bolt handle if required including taking down carefully of door shutter for replacing unserviceable parts/ components by new parts / components for smooth functioning of door/windows and refixing the same in existing opening/ position complete all as specified and directed. |
| 131 | Easing of aluminium door/windows including replacement including changing of hinges tower bolt handle if required including taking down carefully of door shutter for replacing unserviceable parts/ components by new parts / components for smooth functioning of door/windows and refixing the same in existing opening/ position complete all as specified and directed. |
| 132 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed includind taking down and refixing of shutter as in repairs complete all as specified and directed. |
| 133 | S&F in repairs aluminium body hydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairs complete all as specified and directed. |
| 134 | S&F in repair mild steel mortice lock 4 levers, vertical type, size 100mm complete all as specified and directed. |
| 135 | S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube and edgeswill be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed. |
| 136 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete, all as specified & directed. |
| 137 | M & L in repairs 75 mm outlet dia PVC(SWR) branch piece,single /double( Y) equal or unequal complete, all as specified & directed. |
| 138 | M & L in repairs 110 mm outlet dia PVC(SWR) branch piece,single /double( Y) equal or unequal complete, all as specified & directed. |
| 139 | S&F in repairs Door bottom seal brush with metal frame with nylon brush/ rubber with height upto 30-40mm fixed with screws to any type of doors (wooden/alumium/PVC) including necessary fittings complete all as specified and directed. |
| 140 | M& L For Forming Construction joint 30mm deep x 10mm wide filledwith Grade \\"B'sealing compound complete all as specified and directed. |
| 141 | M&L for 75 mm thick PCC (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in plinth protection, surface finished fair and even, laid to slope of 1:30 in alternative bays not exceeding 3 meter in length, complete, all as specified and directed. |
| 142 | S&F in reapiar Sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or with & including fixing cantilever brackets and connecting union to pipe, overall size 915 x 460 mm bowl size 410 x 330 x160 mm including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM (1:3) or PCC (1:2:4) type B0 including taking down old unserviceable sink complete all as specified and directed. |
| 143 | S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed |
| 144 | Dismantling wrought iron or mild steel work of any dscription not otherwise provided for complete all as specified and directed. |
| 145 | M&L for Mild steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240, complete, all as specified and directed by Engineer-in-Charge.Note :- The cost of nuts, bolts & washers for jointing to the members of trusses shall be deemed to be included in the quoted unit rate by tenderer . Nothing extra shall be admissible on this account. |
| 146 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. complete. |
| 147 | S&F 18-20 mm thick granite slab cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 20mm screed bed in CM(1:6) completed all as directed. |
| 148 | M&L for 18 - 20mm thick Granite (of any type) machine cut, in verticle surfaces bedded and jointed with grey cement slurry, over and including 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete complete all as specified and directed by Engr-in-charge. |
| 149 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform,basin plateform and other similar situations complete all as directed by Engr-in-Charge. |
| 150 | M&L for cement concrete 1:2:4 type B-2 (40mm aggregate)in foundations, filling ,column foundation and mass concrete. complete all as specified and directed by Engr in charge. |
| 151 | S&F in repair of 32 mm bore Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. with bends wherever needed complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender