Tender For Repairs To Kitchen, Bath/Toilets, Internal Water Supply & Plumbing Works & Other Misc Works In Certain Md & Otm Accn At Range Hill Area Under Ge (Mh & Rh) Khadki.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Jul 2026
15 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Kitchen, Bath/Toilets, Internal Water Supply & Plumbing Works & Other Misc Works In Certain Md & Otm Accn At Range Hill Area Under Ge (Mh & Rh) Khadki.
BOQ
| Sl. No. | Item Description |
| 1 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed. |
| 2 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed. |
| 3 | Supply and fix 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors, complete all as specified and directed. |
| 4 | Fixing only tubes of 15 mm bore, any grade, to walls and ceiling or laying in floors, complete all as specified and directed. |
| 5 | Supply and fix 20 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors, complete all as specified and directed. |
| 6 | Fixing only tubes of 20 mm bore, any grade, to walls and ceiling or laying in floors, complete all as specified and directed. |
| 7 | Cutting chases, pinning in brick walls, making good to facing where required and pointing in cement mortar (1:3) and making good , cutting n.exc 10cm girth, complete all as specified and directed. |
| 8 | Dismantling water tanks of capacity exc 250 litres but n exc 500 litres and removing to store complete all as specified and directed. |
| 9 | Dismantling water tanks of capacity exc 500 litres but n exc 1000 litres and removing to store complete all as specified and directed. |
| 10 | Supply and fix rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litre hoisted and fixed in position complete all as specified and directed. |
| 11 | Supply and fix rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 litre hoisted and fixed in position complete all as specified and directed. |
| 12 | Supply and fix in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. |
| 13 | Supply and fix in repair ball valves suitable for 20 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed, (minimum weight 210 gms) complete all as specified and directed. |
| 14 | Supply and fix in repair ball valves suitable for 15 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed, (minimum weight 455 gms) complete all as specified and directed. |
| 15 | Supply and fix in repairs stop valves, 15 mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 16 | Supply and fix in repairs PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts complete all as specified and directed. |
| 17 | Supply and fix in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts complete all as specified and directed. |
| 18 | Supply and fix in repairs PVC waste outlet pipe for 32/40mm dia WHB complete all as specified and directed. |
| 19 | Supply and fix in repairs PVC waste outlet pipe for 32/40mm dia kitchen sink complete all as specified and directed. |
| 20 | Cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment/surface and Material and labour for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed. The PU foam shall have 100% solids and solvent free, and shall expand 30 to 40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50, complete all as specified and directed. Make: PIDILITE or equivalent |
| 21 | Making hole and Material and labour for fixing the metallic packer for hydrophobic PU foam and Sealer as per manufacturers specification. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50, complete all as specified and directed. Make: PIDILITE or equivalent |
| 22 | Material and labour for tile joint chemical cleaning and re-grouting carefully by washing the existing tille with heavy duty tile cleaner preferbly of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, curing , cleaning the surface etc and as per the sample done at ground level, complete all as specified and directed |
| 23 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 24 | Material and labour for Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in CM 1:6 complete all as specified and directed. |
| 25 | Material and labour for Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick plastering in cm 1:4 complete all as specified and directed. |
| 26 | Material and labour for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in CM 1:6 complete all as specified and directed. |
| 27 | Material and Labour for Vitrified ceramic coloured tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding in layer in cement mortar 1 :6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tiles, complete all as specified and directed. |
| 28 | Supply and fix in repairs Wash basins, vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing and supply of waste pipe complete all as specified and directed. |
| 29 | Supply and fix in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 30 | Supply and fix in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 31 | Supply and fix in repairs 15mm dia bore fency type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 32 | Supply and fix in repairs CP two way bib taps screwed for iron pipe and fixed necessary fitting with and incl PVC connection complete all as specified and directed. |
| 33 | Taking down drain pipes (any size or pattern), including all fittings, T, bends,etc, including cleaning or refixing (measured overall as fixed along the centre line over fitting and accessories), complete all as specified and directed. |
| 34 | Supply and fix PVC (SWR) pipes 110 mm dia single sockets, in any length rubber ring joints, laid in trenches or in floor complete all as specified and directed. |
| 35 | Supply and fix PVC (SWR) 110mm dia bends any radius complete all as specified and directed. |
| 36 | Supply and fix PVC (SWR) branch 110mm bore piecs, single ( single Y ) equal or unequal complete all as specified and directed. |
| 37 | Supply and fix PVC (SWR) pipes 75 mm dia single sockets , in any length rubber ring joints, laid in trenches or in floor complete all as specified and directed. |
| 38 | Supply and fix PVC (SWR) 75 mm dia bends any radius complete all as specified and directed. |
| 39 | Supply and fix PVC (SWR) branch 75 mm bore piecs, single ( single Y ) equal or unequal complete all as specified and directed. |
| 40 | Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 41 | Supply and fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and directed. |
| 42 | Supply and fix in repairs wash down water closet ( European type) excluding fixing bolts, flushing cistern, & flush pipe but including connecting to existing out let pipe etc complete all as specified and directed. |
| 43 | Supply and fix in repairs Plastic seat cover to EWC with aluminium hinging device complete all as specified and directed. |
| 44 | Supply and fix in repairs PVC (SWR) 75mm outer dia multi floor trap with grating including jointing with solvent cement complete all as specified and directed. |
| 45 | Supply and fix in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed. |
| 46 | Supply and fix in repairs Looking mirror 600mm x 450 mm beveled edge of selected quality glass fixed with PVC moulded frame, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 47 | Supply and fix in repair PVC water tank cover with fitting suitable for tank of capacity of 500 liters etc including device, complete all as specified and directed. |
| 48 | Supply and fix in repair PVC water tank cover with fitting suitable for tank of capacity of 500 liters to 1000 liters etc including device complete all as specified and directed. |
| 49 | Supply and fix in repair tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated,complete all as specified and directed. |
| 50 | Supply and fix in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 51 | Demolition stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar, complete all as specified and directed. |
| 52 | Material and labour for Granite slab 20 mm thick machine cut bedded and jointed with grey cement and pointed and adhesive of pigment to match the shade incl cutting and polshing complete all as specified and directed. |
| 53 | Material and labour for 20mm to 25mm thick machine cut cuddappah stone slab flooring over cement screed bed laid and jointed with grey cment slurry mixed with pigment to match the shade of the slab incl grinding polishing complete all as specified and directed. |
| 54 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed. |
| 55 | Supply and fix in repair plate rack made of stainless steel 1mm thick kitchen including fixing overall size 915mm x 915mm x 255 mm complete all as specified and directed. |
| 56 | Supply and fix in repairs Health faucet brass chromium plated with connecting decorative pipe including all accessories required for fixing of 15 mm bore of pipe complete all as specified and directed. |
| 57 | Supply and fix in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and directed. |
| 58 | Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc, complete all as specified and directed. |
| 59 | Material and labour for rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar 1:6, complete all as specified and directed. |
| 60 | Material and labour for rendering 10 mm thick in cement mortar 1:4 on fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement complete all as specified and directed. |
| 61 | Material and labour for applying two coat of oil bound distemper over a coat of primer to newly plastered surface including preparation of new plastered surfaces to wall complete all as specified and directed. |
| 62 | Material and labour for applying three coats of white wash to newly plastered surface of ceiling including preparation, complete all as specified and directed. |
| 63 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) complete all as specified and directed. |
| 64 | Material and labour for waterproofing treatment to RCC sunken slab as specified below complete all as specified and directed. Make: PIDILITE , Dr Fixit or equivalent. |
| 65 | Clean the sunken portion of toilet/Bath/WC/Kitchen thoroughly to remove laitance, dirt , dust etc |
| 66 | Form angle fillet of size 40 mm x 40mm along the junction of wall and floor using polymer modified mortar (\\"Dr Fixit\\" Pidicrete URP\\" or equivalent) |
| 67 | Sanitary pipes entering through walls and floor shall be sealed with \\" Dr Fixit Bathseal Tape\\" and the gaps to be grouted with non-shrink cementitous grout \\" Dr Fixit Bathseal Gruot\\" or eqvt . Nahani traps , etc to be fitted securely and the gaps around it to grouted in the same manner. |
| 68 | Apply one coat of a Bitumen- modified polymer coating \\" Dr Fixit Bathseal Plus\\" or eqvt on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. |
| 69 | In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first coat is dry. Extend the coating upto 150mm above the FFL. Above FFL, another cementitious waterproof coating \\" Dr Fixit Pidifins 2K\\" or eqvt can be further applied right upto 2.1 mtr to waterpoof the shower area also , if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6 to 8 hours allow to dry completely. |
| 70 | After 2 to 3 days, sunken portion must be overlaid with a 50mm thick concrete screed M 15 type B0 (12.5 mm graded stone aggregate) mixed with integral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40mm OD UPVC pipe at the lowest point with 300mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2 (40 mm graded stone aggregate), complete all as specified and directed |
| 71 | After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of approved makes such as Dr Fixit, FOSROC , SIKA, MC BUCHEMIE, ROFF etc , complete all as specified and directed(Note:- Tiling work will be measured and paid separately) |
| 72 | Material and labour for PCC (1:5:10) type E2 using 40mm graded stone aggregate as in mass concrete or as in sunken portion or floor complete all as specified & directed |
| 73 | Material and labour for 25 mm thick PCC 1 :2 : 4 type B0 ( Using 12.5 graded stone aggregate ) as in base of floors complete all as specified and as directed by Engineer-in-Charge. |
| 74 | Material and labour for 75mm thick PCC 1:4:8 type D2 ( 40 mm graded stone aggregates) as in sub base of floor all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender