Tender For Off Beat Destination Upgradation Of Aharbal B.W.O Upgradation Of Departmental Hut, Construction Of 4 Units Toilet Complex With Tuck Shop, Providing And Installation Of Signages, Solid Waste Management Along With Providing Of Dust Bins, Con
Tender Value
20.88 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
7 days left
EMD
41760
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kulgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Off Beat Destination Upgradation Of Aharbal B.W.O Upgradation Of Departmental Hut, Construction Of 4 Units Toilet Complex With Tuck Shop, Providing And Installation Of Signages, Solid Waste Management Along With Providing Of Dust Bins, Construction Of Selfie Points, Lighting/Illumination, Development Of Hiking Trails B.W.O Signages, Benches, Installation Of Zipline, Installation Of Children Recreation Zone. (Sub-Work: Supply, Installation, Testing, And Commissioning (Sitc) Of A 200-Meter Commercial Zip Line System).Advertised Cost=₹20.88 Lacs (Amount Without Gst =17.69 Lacs And Gst Amount =3.19 Lacs )
BOQ
| Sl. No. | Item Description |
| 1 | Primary Cable:Supply, Installation, Testing and Commissioning of Single Continuous Length Primary Cable 12 mm nominal diameter, constructed with 7 strands containing 19 wires each over Independent Wire Rope with Steel Core (7×19 IWRC), complete with end terminations, anchoring arrangements, tensioning/sag adjustment, alignment and associated fittings as required for satisfactory operation.Material of Construction (MOC): High tensile hot-dip galvanized steel wire rope with steel core (IWRC).Nominal Cable Diameter: 12 mmConstruction: 7×19 IWRCSafe Working Load (SWL) / Working Load Limit (WLL): Minimum 25 kNMinimum Breaking Load (MBL): 125 kN or higherMake: Reputed/EIC approved.Certification Requirement:Minimum Breaking Load and rope properties shall be supported by OEM test certificates and comply with relevant EN, IS, ASTM or equivalent accepted standards. |
| 2 | Zipline Trac pulley/Impact trolley for Primary Cable: Supply, Installation, Testing and Commissioning of Zip line trolleys/pulleys compatible for Primary cable with T Handle and Hook/Catch mechanism, continuous Slings & lanyards and carabiner with durable front and rear impact surfaces, having double sealed ball bearing for even load distribution, multiple attachment points for harnesses and safety gear, smooth riding experience and safe braking situation. The trolley should be able to handle the speeds of at least 30m/s, rider capacity of 150kg and minimum breaking strength of 30kN. The trolley must be equipped with rider orientation restraint/forward design and pivoting bar to keep the rider facing forward.MOC: High strength anodized Aluminum housing, Stainless Steel Sheaves, ABS Impact Surfaces, High Strength Polyester tubular webbing resistant to environmental factors.Minimum Breaking Strength: 30kN & 22kN for slingsSize ≥180 x 111 x 33 mm, Sling Quantities in 120cm and 180cm, At least 25mm width and sufficient length to wrap around the Anchoring points.Make: Reputed. |
| 3 | Full Body Harness: Supply, testing and commissioning of full body zipline safety harness compatible with single or double lanyard operation, complete with shock-absorbing positioning lanyards, attachment connectors and all accessories required for safe zipline operation. The harness shall be designed for fall arrest, positioning and rider restraint applications, ensuring secure load distribution and user comfort during prolonged use.Technical Requirements / Specifications:Multiple attachment points including ventral, sternal and dorsal attachment points for fall arrest and positioning applications.Adjustable shoulder, chest and leg straps for proper fit and orientation.Padded waist, leg and shoulder support for improved comfort and load distribution.Double-locking / quick-connect buckles with load-rated attachment hardware.Integrated shock absorbing lanyard system compatible with zipline trolley assemblies.Water and abrasion resistant high-strength webbing.Minimum webbing strength: 25 kNMinimum buckle strength: 19 kNSuitable user load capacity: minimum 150 kgMaterial (MOC): High-density polyester/polyamide webbing with steel or alloy attachment hardwareCompliance: EN 361, EN 358, EN 813, UIAA / CE or equivalent international safety standards.Service life and inspection requirements as per OEM recommendations.Make: Reputed OEM approved for industrial fall protection / adventure activities / zipline applications.Harnesses shall be available in appropriate sizes for children and opearators with adjustable fitting arrangements for varying body dimensions. |
| 4 | Continuous Fall Arrest SystemSafety Cable:Supply, Installation, Testing and Commissioning of Single Continuous Length Safety Cable, 10 mm nominal diameter, constructed with 07 strands each containing 19 individual wires over Independent Wire Rope with Steel Core (7×19 IWRC), independently anchored from the primary cable at both towers, complete with end terminations, anchoring arrangements, tensioning/sag adjustment, alignment and all associated hardware required for satisfactory operation.Material of Construction (MOC): High tensile hot-dip galvanized steel wire rope with steel core (IWRC).Nominal Cable Diameter: 10 mmConstruction: 7×19 IWRCSafe Working Load (SWL) / Working Load Limit (WLL): 17.4 kNMinimum Breaking Load (MBL): 87 kN or higherAnchoring Requirement:Safety cable shall be provided with independent anchoring and support arrangements separate from the primary cable anchorage system to ensure redundancy in the event of primary system failure.Accessories Included: End terminations, anchor connections, tensioning arrangements and installation hardware.Make: Reputed/EIC approved.Certification Requirement:Minimum Breaking Load and cable properties shall be supported by OEM test certificates and comply with relevant EN, IS or equivalent accepted standards. |
| 5 | Zipline Safety Trolley for Safety Cable:Supply, Installation, Testing and Commissioning of heavy-duty zipline safety trolley compatible with the specified safety cable, complete with integrated auto-locking connector/carabiner, continuous Slings and lanyards, rider orientation mechanism required for safe operation. The trolley shall ensure smooth movement along the safety cable, maintain rider stability and provide continuous secondary safety support during operation.Technical Specifications:Suitable for operating speed: ≥ 25 m/sMinimum rider load capacity: 150 kgMinimum breaking strength (MBS): 30 kNSelf-orienting design to maintain rider in a forward-facing position during travel.Integrated auto-locking connector/carabiner compatible with approved zipline harness systems.Anti-derailment / anti-disengagement provision for enhanced operational safety.Sealed maintenance-free bearings for smooth operation and reduced wear.Material (MOC): High strength anodized aluminium alloy body/frame with stainless steel sheaves and corrosion-resistant hardware, High Strength Polyester tubular webbing resistant to environmental factors.Minimum dimensions: 160 × 130 × 90 mm or OEM standard, whichever is higher, Sling Quantities in 120cm and 180cm, at least 25mm width and sufficient length to wrap around the Anchoring points.Compliance: EN 12278 / CE / UIAA or equivalent internationally accepted standards.Suitable for repeated outdoor use under varying environmental conditions.Make: Reputed / EIC approved. |
| 6 | Continuous Fall Arrest System (CFAS) Accessories and Connection Hardware:Supply, installation, testing and commissioning of all additional components required for Continuous Fall Arrest System (CFAS) including auto-locking connectors/carabiners, shock absorbing lanyards, emergency release mechanism, tether swivel, ferrules, bow shackles, end termination fittings, anchoring hardware and allied accessories for maintaining uninterrupted secondary attachment between rider harness and safety trolley throughout the ride. The system shall provide secure load transfer, anti-twist functionality, emergency disengagement/rescue provision and permanent cable terminations, suitable for rider load up to 150 kg and complete in all respects as per relevant EN/IS or equivalent safety standards.MOC: High strength aluminium/steel connectors, galvanized steel fittings, ferrules and associated hardware.Make: Reputed.Standards: EN / IS or equivalent.Any other item not mentioned above but necessary for the complete and functional setup. |
| 7 | Braking System: Supply, Installation, Testing and Commissioning of Bungee cord Braking system, an impact absorbing active block system located at the recieving end ,using Marine grade shock cords configured to progressive counter weights ,with anchoring complete setup,minimum 16mm cord diameter able to handle 150kg of rider weight and stop the rider smoothly without any injury. The braking system shall consist of Quick Release Mechanism with Bungee Cord having Variable Stiffness segments(Soft: Entry ; Medium: Mid & Firm: End) along the length for Progressive braking to improve the braking efficiency. Brake Length: 20-25 meters of bungee cord stretch with 150-175% of extension.Max Rider Weight: 150 kg Max Deceleration Force: 1.5-2 gSpare Cords: Full Replacement set of bungee cords supplied.MOC: Heavy-duty synthetic rubber (EPDM or latex blend), UV and weather resistant cord, Stainless steel frame with heavy-duty anchoring,Specialized pulleys or guides. |
| 8 | Secondary / Emergency Arrest Device: Supply, Installation, Testing and Commissioning of compression Spring emergency arrest device with minimum 05 number of springs each of length 6.5 ft for 7m of braking distance with complete setup and other neccessary accessories able to handle rider speeds of at least 68 kmph and rider weight of 150kg . The EAD should deploy quickly and effectively in an emergency situation with minimum response time. The EAD must be capable of arresting the maximum potential load and maximum speed, including the weight of the rider & design safety factor of 5:1 based on maximum dynamic load. The EAD should be designed for ease of maintenance and regular inspection. Components should be accessible for checks, repairs, and replacements. It should include inspection points or indicators to help with routine maintenance. The EAD should be compact and designed to integrate seamlessly with the zipline system without interfering with the primary operation or rider experience.Distance between the braking system and zipline end must accommodate the maximum braking distance plus the safety buffer. The braking system in place should adjust for the changes in the rider weight and speed to fine tune braking force and distance and should be able to reset itself after each usage and avoid re bouncing effect thus increasing throughput and efficiency. MOC: 304 stainless steel Spring, Rubber Stopper, Built-In iron plateWeight Capacity: >150 KgWorking Range: Compatible for 12mm & 10 mm cablesMake: Reputed |
| 9 | Heavy Duty Turnbuckle: Supply, Installation, Testing, and Commissioning of a heavy duty Jaw and Jaw type Turnbuckles for main and safety cable with suitable tool kit viz. wrenches, pliers, cotter pins/lock wire, measuring Tape, anti galling paste, tension guage and other necessary accessories for adjusting length to accommodate the zipline span, Sag and tension requirements, ensuring safety and performance, secure locking mechanism . This should be designed to match the cable size with FOS 5. It should be able to work in the mentioned working temperature range and should also be and corrosion resistant.The turnbuckle shall conform to Latest IS/EN standards.MOC: SS 304 Minimum Breaking load:220KN Working Load Limit: 44kN Adjustment range:400 mmMake: Reputed. |
| 10 | Safety Helmet: Supply, Testing and Commissioning of Zipline Safety Helmet with Flip and Fit system allowing for secure fit and adjustment for different sizes of heads(Small, Medium and Large) designed to absorb shocks and reduce the risk of head injuries from falls or collisions, anti concussion straps, width not less than 19mm, adjustable chin strap and rear dial fit with quick release mechanism and provision for ventilation, integrated headlamp clips and washable padding. The helmet shall have mountings for video recording device,selfie sticks and other communication devices. MOC: Acrylonitrile Butadiene Styrene (ABS)/ Polycarbonate/ Fiberglass shell, Expanded Polystyrene (EPS) liner, Polyester straps Make : Reputed. |
| 11 | Mitten Gloves: Supply and Testing of heavy Duty High abrasion double leather knitted Mitten Gloves in different sizes designed to ensure safety, grip and comfort. Durable synthetic material for outer layer, breathable(ventilation holes/ mesh panels)and moisture wicking fabrics to keep hands dry, Reinforced palms or padded areas to absorb impacts and reduce vibration for fingers, extra padding/protection to safeguards against bumps or collisions, textured surfaces and non slip material for safe and secure grip, Hook and loop Velcro closures or elastic cuffs and elastic bands for better fit and movement flexibility and snug fit for adjustable straps, extra material on high wear zones like palms and finger tips.MOC: Leather, Kevlar, Reinforced Nylon hard shell protection for added safety.Make: Reputed. |
| 12 | Heavy Duty Carabiner: Supply, Installation, Testing and Commissioning of Heavy duty Carabiners with auto locking gate and triple action mechanism and key lock nose to prevent snagging of oval shape allowing for optimal loading and versatile attachments, integrated full strength attachment point for optional backup connector with other equipment greatly reducing the rope snagging and to prevent the accidental opening.MOC: High strength steel.Minimum Breaking Strength along major axis and minor axis: 50kN and 25 kN respectively.Size: Gate opening of 20-25 mmWeight :180-200gmMake : Reputed. |
| 13 | Heavy Duty U Clamps: Providing and fitting of heavy duty U clamps to clamp the cable , ensuring a stable and safe connection under the load at the termination points(factory made swaged or spelter socketed terminations). These must accompany the relevant accessories such as spring washers, nuts and other peripherals for smooth functioning. The round U clamp shall have M16 threads, Bolt length≥40mm,load capacity ≥5000 kgs.MOC: High strength stainless steel.Working range: Compatible for both main and safety cables.Safe working load: 42 kNMinimum Breaking load:5 x safe Working Load Make : Reputed.For main Cable : |
| 14 | Heavy Duty U Clamps: Providing and fitting of heavy duty U clamps to clamp the cable , ensuring a stable and safe connection under the load at the termination points(factory made swaged or spelter socketed terminations). These must accompany the relevant accessories such as spring washers, nuts and other peripherals for smooth functioning. The round U clamp shall have M16 threads, Bolt length≥40mm,load capacity ≥5000 kgs.MOC: High strength stainless steel.Working range: Compatible for both main and safety cables.Safe working load: 42 kNMinimum Breaking load:5 x safe Working Load Make : Reputed.For Safety Cable : |
| 15 | Heavy Duty D Shackles: Providing and Fitting of heavy duty Wire Rope D ShacklesMOC: Drop forged electro Galvanized steel or AISI 316 SS Safe Working Load: 42kN Minimum Breaking Load : 5 x safe Working Load Shackle size: Pin dia matched for Main and Safety Cable Make : Reputed.For main Cable : |
| 16 | Heavy Duty D Shackles: Providing and Fitting of heavy duty Wire Rope D ShacklesMOC: Drop forged electro Galvanized steel or AISI 316 SS Safe Working Load: 42kN Minimum Breaking Load : 5 x safe Working Load Shackle size: Pin dia matched for Main and Safety Cable Make : Reputed.For Safety Cable : |
| 17 | Heavy Duty Wire Rope Thimbles: Providing and fitting of Deep Groove heavy duty Wire Rope Thimbles to protect the cable from sharp bending.MOC: Drop forged electro Galvanized steel or AISI SS 316Safe Working Load: 20kN Minimum Breaking Load : 5 x safe Working Load Make : ReputedFor main Cable : |
| 18 | Heavy Duty Wire Rope Thimbles: Providing and fitting of Deep Groove heavy duty Wire Rope Thimbles to protect the cable from sharp bending.MOC: Drop forged electro Galvanized steel or AISI SS 316Safe Working Load: 20kN Minimum Breaking Load : 5 x safe Working Load Make : ReputedFor Safety Cable : |
| 19 | Shock Absorber System with Tensioner for safety cable: Supply, Installation, Testing and Commissioning of Shock absorber system and Tensioner complete setup for safety cable in order to mitigate the impact forces during the arrest of falls, progressive spring compression to handle dynamic loads, secure connections for easy integration into the zipline system, designed to stretch sufficiently for the 200m zipline and up to 300kg rider weight with margin of safety 5,and to ensure rider safety typically reducing the impact force below 5kN during fall. The absorber system shall be able to integrate with both horizontal and vertical fall arrest systems to provide comprehensive safety including the features to prevent over compression and ensure smooth operation. MOC: Stainless Steel Casing, Polyester/Nylon Webbing, stainless steel for springs and carabiners, D rings, connectors ,buckles and other hardware, reinforced fabric/foam padding.Make: Reputed. |
| 20 | Heavy Duty Adjustable Clamps: Supply, Installation, Testing and Commissioning of Adjustable clamps able to handle the Safe Working Load of 300 kg minimum (2× rider weight) to accommodate dynamic loading.The system should offer fine adjustment features to ensure proper tensioning and alignment of the cable and can adjust to maintain a secure grip on cables within the range of cable diameter. Clamps should have a robust locking mechanism to prevent accidental loosening. This includes features like safety pins, locking screws, or self-locking designs. The clamps should have anti-slip features to ensure a secure hold on the cable, reducing the risk of movement during use. The clamps should be capable of withstanding environmental factors such as UV radiation, temperature fluctuations, and precipitation, which could affect their performance over time. The design should facilitate easy installation, maintenance, inspection and adjustment. Additional hardware or systems for tensioning the zipline cable effectively should accompany with it and ensure that the adjustable clamps are compatible with these systems.Clamping Range: 10 -12mm cable diameterSafe Working load: 150kg of rider weightMinimum Breaking Strength: 5x Safe Working LoadMOC: Aircraft-grade Aluminum/ Stainless steel |
| 21 | Manual Zipline Rescue cum Retrieval System:Supply, installation, testing and commissioning of Manual Zipline Rescue cum Retrieval System suitable for emergency rescue and recovery of zipline trolley and passenger (conscious or unconscious) from any point along the zipline span. The system shall be designed to facilitate retrieval with minimum manual effort and without requiring rescue personnel to access the cable during normal rescue operations. The system shall be suitable for 200 m zipline span, complete with retrieval line, rescue/retrieval arrangement, anchoring system, connection hardware and all allied accessories required for safe and reliable operation. The complete system shall be capable of retrieving a minimum load of 250 kg, shall incorporate a minimum 5:1 design safety factor, and all critical load-bearing components shall have a minimum breaking strength of 25 kN. Retrieval rope/wire rope shall be of suitable construction and strength for the intended application and outdoor service conditions. The system shall include, but not be limited to, rescue hooks, rescue handles, connectors, bow shackles, anchor slings, rope grabs, ferrules, thimbles, wire rope clips, end terminations, mounting brackets, anchor connection hardware, retrieval attachment assemblies and all other accessories required for complete functionality. All components shall be corrosion resistant, suitable for outdoor use and conform to relevant EN/IS or equivalent standards. OEM test certificates for critical load-bearing components shall be furnished. |
| 22 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : |
| 23 | Providing and laying of stone soling (hand packed) incl. backfilling, compacting in foundation trenches and carriage. |
| 24 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) including carriage |
| 25 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) including carriage |
| 26 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 27 | Centering and shuttering including strutting, propping etc. and removal of form work |
| 28 | Guy Wire Anchoring System: Supply, Installation, Testing and Commissioning of complete heavy duty anchoring system(deadman anchor, anchor plate system or equivalent engineered anchoring solution) for guy wire support comprising hot dip galvanized steel anchor assembly(excluding cable) including anchor rods, anchor plate/deadman anchoring arrangement, shackles, bolts, thimbles, ferrules, wire rope clips or swaged terminations, protective sleeves, corrosion protection treatment, alignment, tensioning, fixing and all allied accessories complete in all respects. The complete anchoring assembly shall be designed with a minimum Factor of Safety (FOS) of 5, and the Safe Working Load (SWL) of the weakest load-bearing component shall not be less than 25 kN. The system shall be adequately protected against corrosion, properly aligned, tensioned, tested and commissioned for safe long-term operation, complete in all respects.Any other equipment not mentioned above but necessary for the complete and functional set up. |
| 29 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : |
| 30 | P/L of stone soling/Nallah boulder dry hand packed including all carriages complete job. |
| 31 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 32 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 33 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level icluding all carriages |
| 34 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. |
| 35 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 36 | Carriage of Materials Coarse aggregates via M.T. 17 Kms |
| 37 | Carriage of Materials Sand via M.T. 32 Kms Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender