Tender For Special Repair To Bldg No. P-103 At Arsenal Of Cafvd Khadki Under Ge (Central) Khadki.
Tender Value
46.25 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
14 days left
EMD
92500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No. P-103 At Arsenal Of Cafvd Khadki Under Ge (Central) Khadki.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Single or double layer Mangalore pattern or similar tiles on ridge/roofing complete all as specified and as directed. |
| 2 | Dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified and as directed. |
| 3 | Dismantaling battens for tiles, singles etc of any size including tiling fillets spaced exc.15 cm complete all as specified and as directed. |
| 4 | Supply and fix roof tiles, Mangalore Pattern, inter locking at side joints laid dry complete all as specified and as directed. |
| 5 | Description allas per item No 4 above but (except) Mangalore tiles NOTE :- Material shall be used from dismantling |
| 6 | Supply and fix ridge or hip tiles to suit mangalore pattern of roofing tiles bedded and jointed in CM 1:6 complete all as specified and as directed. |
| 7 | Supply and fix 0.63mm thickness galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers, in roofs(in any position and bent to any radius curve), walls etc. with grade of zinc coating 275 etc complete all as specified and as directed. |
| 8 | Supply and fix for plain, galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) by using 1.00mm thick sheet grade of zinc coating @120 Gms/Sqm both sides and welded or soldered joints are provided complete all as specified and as directed. |
| 9 | Dismantaling timber in scantling 40 sq.cm and over in section in any position and any description unframed wk or unframed work. |
| 10 | Supply and fix for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (Gde-E- 250) quality-A etc complete all as specifed and as directed. |
| 11 | Supply and fix for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290, Gde-E-165 etc complete all as specified and as directed. |
| 12 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles and removing the debris outside the defence land complete all as specified and as directed. |
| 13 | Material and labour for pre-cast cement concrete solid block masonry with solid block of the grade Type C-1, (1:3:6) using 20mm graded aggregate set in CM (1:4) complete all as specified and as directed. |
| 14 | Material and labour for 15mm thick rendering on fair faces of concrete surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified and as directed. |
| 15 | Material and labour for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:6 with water profing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specifed and as directed. NOTE :- Water proofing compound shall be measured & paid separetely |
| 16 | Material and labour for preparing new plastered surface of walls and applying two coat of oil bond distemper of alkali resistant primer at any height including necessary scaffolding ladder etc complete all as specifed and as directed. |
| 17 | Material and labour for preparation of old plastered or unplastered surface of wall and applying two coat of oil bond emulsion, white or tinted complete all as specified and as directed. |
| 18 | Material and labour for preparation of new or previously untreated steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 19 | Material and labour for preparation of old plastered or unplastered surface of walls and applying two coats of cement base paint of approved tint upto height 15 mtr including necessary scaffolding etc complete all as specified and as directed. |
| 20 | Material and labour for preparation of old painted steel surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed |
| 21 | Material and labour for 50 mm thick plain cement concrete type D-2 (1:4:8) (using 40mm graded stone aggregate) as in sub base complete all as specifed and as directed. |
| 22 | Material and labour for Rubber moulded coloured glossy finish (Red, Yellow & Black) precast concrete interlocking paver blocks with grey cement and pigment any shape and size, shade as approved by GE, 60mm thick conforming to IS 15658-2006 M-35 grade and interstices filled with sand including 25mm thick sand cushion a complete all as specified and as directed. |
| 23 | Material and labour for plain cement concrete (1:3:6) type C-2, 75mm thick (using 40mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement including provision of construction joints complete all as specified and as directed. |
| 24 | Material and labour for cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) as in bed block, benching, kerb, mud stop, rounded or chamferred on edges, coping including necessary formwork wherever required complete all as specifed and as directed |
| 25 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thickness (below of above ground level) and removing the debris outside the defence land complete all as specifed and as directed. |
| 26 | Material and labour for granolithic topping floor 30 mm thick with M-20 grade (Desine mix) over and incl 75 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate laid on floors finishing cement concrete surface even and smooth using extra cement complete all as specified and as directed. |
| 27 | Material and labour 38 mm plastic dividing strips complete all as specified and as directed. |
| 28 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 29 | Supply and fix, plain sheet glass 4mm thick, ordinary quality, not exc 0.50 Sqm in each pane fixed to aluminium door/window and steel window/frame with oil putty and securing pins, spring clips etc complete all as specified and as directed. |
| 30 | Material and labour for Granite 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like in 10mm thick screed bed or bedding layer cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 31 | Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed. |
| 32 | Supply and fix powder coated aluminuiim partitions wall including anchorage rod, aluminium cleats, drilling, punching, plastering, and making good to the existing surfaces and comprising of following specification as directed :- (a) aluminium section of size 49.91x44.45x2.00 mm thick (b) 5 mm thick tinted glass with aluminium galzing clips and rubber beads, area not exceedings 1.5 sqm (c) 12 mm thick both side prelaminated particle baord fixed with aluminium clips and rubber beads complete all as specified and as directed. |
| 33 | Material and labour for glazed rified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 34 | Supply and fixing powder coated aluminium door made out of hollow extruded aluminium section as mentioned below. Each door having 02 Nos disc or D type handels, 02 Nos aluminium tower bolts 200 mm size one aluminium sliding door bolt or 250mm size, one brass mortice lock of six levers with key in duplicate regulated by double action hydrolic floor door spring (Make Sandhu/TITZ) shutter to be partly glazed with 5 mm thick tinted glass and partly paneled with 12 mm thick pre laminated particle board fixed with glazing clips, rubber beading/gasket anodized aluminium beading screws complete. Chowkhat Frame : 101.60x44.45x1.55 mm Shutter verticle/stile: 85.00x44.45x1.56 mm Shutter middle rail : 83.50x44.45x1.54 mm Shutter top and bottom rail : 110x44.45x1.54 mm (ii) Particle board : Novapan, Duratuff (iii) Glass : Saint, Gobain, Modi Guard, TATA |
| 35 | Taking down carefully existing unserviceable aluminum / copper point wiring of any description & in any position with and including existing steel conduit / PVC Conduit / Casing caping fixed on surface/wall/angle/gardder and including all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, sockets, etc including sunken boxes/junction boxes and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and as directed. |
| 36 | Material and labour for point wiring in PVC casing caping of suitable size but not less than 20mm including all fittings such as elbow, bends, junction boxes, saddles, etc. on surface with and including ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sqmm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sqmm (green colour) ISI marked PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire to be terminated in and incl PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover for one light point or one fan point controlled by one switch including making good the disturbed wall and painting the same with matching to existing wall all as specified and as directed. |
| 37 | Description all as per Srl item No 36 above but light/fan/exhaust fan point controlled by one switch. |
| 38 | Description all as per Srl item No 36 above but 5 pin switch socket outlet 5 Amps on independent board controlled by one switch. |
| 39 | Description all as per Srl item No 36 above but 5 pin switch socket outlet 5 Amps on same board controlled by one switch. |
| 40 | Description all as per Srl item No 36 above but for for one 6 pin switch socket outlet 15 Amps/AC Point on independent board controlled by one switch in PVC casing caping |
| 41 | Supplying and fixing switch flush type, 5 Amps, single pole, one way , 230 volts AC circuit complete all as specified and as directed. |
| 42 | Supplying and fixing socket outlet, five pin, 5 Amps, flush type, multipurpose, 230 volts AC circuit complete all as specified and as directed. |
| 43 | Supplying and fixing switch flush type, 15 Amps, single pole, one way , 230 volts AC circuit complete all as specified and as directed. |
| 44 | Supplying and fixing Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type , flush type, 230 volts AC circuit complete all as specified and as directed. |
| 45 | Supplying and fixing ceiling rose PVC/polycarbonate, isolated body, three terminals, complete all as specified and as directed. |
| 46 | Supply and fixing in replacement Stepped type electronic fan regulator flush type suitable for ceiling fans, prewired 230 volts AC 50Hz supply 100Watt complete all as specified and as directed. |
| 47 | Supply, fixing, connecting and testing in replacement Industrial Earth Plug & socket with sheet metal enclosure of IP44 rating electric driven single phase including MCB 'C' series SP 20 Amps and supplied with neutral links complete all as specified and as directed. |
| 48 | Dismantling and Taking out old unserviceable copper/aluminium sub main wiring/Unarmoured cable (used as Sub main wiring) from any height of any Size and Core with all connecting accessories incld. conduit or casing caping and incld. making good to the disturbed wall and painting the same with matching paint as of existing wall incld material all as specified and as directed. |
| 49 | Material and labour for sub main wiring at any height with 2 single core PVC insulated, multi stranded copper conductor cable (FRLSH), unsheathed, 2.5 sqmm, 1100 volt grade conforming to IS drawn through and including New 20 mm PVC conduit and including one single core PVC insulated multi stranded unsheathed copper conductor cable, 2.5 sqmm,, FRLSH green in colour as continuous earth wire including all accessories and fixing arrangements, supporting clamps, bends, sockets and connecting items etc. all as specified and as directed. |
| 50 | Material and labour for Sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, conforming to IS, FRLSH type, 4.0 Sqmm, 1100 volts grade, drawn through and including New PVC conduit 20 mm dia including connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, FRLSH type, 4.0 sqmm, 1100 Volts grade,,green in colour as earth contuinity wire all as specified and as directed. |
| 51 | Dismantling and Taking down unserviceable existing light fittings of any size and capacity from any location/height after disconnecting of electrical connection complete including all connected accessories complete all as specified and as directed. |
| 52 | Supply & fixing, CRCA housing box LED Type luminiare suitable for and including 2x20 W 4 feet long complete including tube rod & connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 53 | Supply & fixing, CRCA housing box LED Type luminiare suitable for and including 2x20 W 4 feet long complete including tube rod & connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender