Tender For Comphernsive Maintenance At Dharmund Mil Stn Under Age (I) Bhalra.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
14 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Doda → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comphernsive Maintenance At Dharmund Mil Stn Under Age (I) Bhalra.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises outside Cantt area complete all as specified and directed. |
| 2 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 3 | Non skid ceramic jointless coloured tiles, 7 mm to 8 mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor etc set and jointed in neat cement slury and pointed in white or coloured cement mixed with pigment to match over and including 15 mm thick screed layer in cement mortar 1:6, complete all as specified and directed . |
| 4 | All as per item srl No-3 here-in-before but as in skirting/ dado etc with and including 10 mm thick backing coat in cement mortar 1:4 on wall complete all as specified and directed. |
| 5 | Glazed ceramic coloured tiles of size 450mmx300mm, thickness 7 mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 6 | Vitrified light shade ceremic tiles 600mmx600mmx10mm thick (square/rectangular) polished in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 7 | Vitrified light shade ceremic tiles 600mmx600mmx 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 Sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 8 | Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms and like including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including screed bed or bedding layer of mortar 15 mm thick for laying floor in CM 1:4 finished even and rough to receive top layer including rounding/ bull nose to expose edge, complete all as specified and directed. |
| 9 | Machine cut Kota stone slab flooring not less than 18 mm - 20 mm thick (size of stone shall not less than 55 cm x 55 cm), 75 mm wide white marble border alround, laid over and including 20 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified and directed. |
| 10 | Machine cut Kota stone slab not less than 16 mm thick as in riser of steps, skirting, dado and pillar laid over and including 10 mm thick screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified and directed. |
| 11 | Precast designer coloured Endura tiles with glossy finish (factory made rectified) of size 300mmx300mmx10mm, top layer glazed made in any type of cement and pigment, in required patterns in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the shade of tile over and including 15 mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes, complete all as specified and directed. |
| 12 | Plain cement concrete 1:4:8 type C-2, (using 40 mm graded crushed stone aggregate) as in Sub-base to floor finishes complete all as specified and directed. |
| 13 | 40 mm thick plain cement concrete 1:2:4 type B-1 (using 25 mm graded crushed stone aggregate) as in sub bases of floors rough finished complete all as specified and directed. |
| 14 | Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed. |
| 15 | Brickwork with bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and directed. |
| 16 | Except brick of any description in CM:6 complete all as specified and directed. |
| 17 | Brick work with sub class 'B' modular bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick walls complete all as specified and directed. |
| 18 | Taking down cement or cement lime plaster of any description on brick or stone walls, ceiling including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 19 | Rendering 15 mm thick cement plaster in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed. |
| 20 | 10 mm thick rendering on fair faces or brick work or concrete surfaces in cement mortar 1:6 surface finished even and smooth (with out using extra cement) complete all as specified and directed. |
| 21 | Preparing newly plastered or unplastered surfaces of wall and applying two coats of white wash complete all as specified and directed. |
| 22 | Preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant cement primer and over a coat of putty complete all as specified and directed. |
| 23 | Preparing new surfaces (plastered or unplastered) of walls and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and directed. |
| 24 | Preparation of old decorated plastered surfaces of walls including cornices by washing, rubbing down and stopping of distempered and painted surfaces smoke soot, moulds, moss and effloresnt salt and trading oil or greasy spots etc, and applying one coat of cement base paint complete all as specified and directed. |
| 25 | Preparation of old decorated plastered surfaces of walls including cornices by washing, rubbing down and stopping of distempered surfaces of walls and applying one coat of oil bound distemper white or tinted complete all as specified and directed. |
| 26 | Two coat of white wash on old surface on ceiling including preparation of surface complete all as specified and directed. |
| 27 | Demolition of cement concrete any description (unreinforced) in ground floors and pavings not exceeding 15 cm in thickness all (below or above ground level) complete all as specified and directed. |
| 28 | 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection laid in alternate bays finished even and smooth without using extra cement including formwork complete all as specified and directed. |
| 29 | Dismantling of plain or corrugated steel sheeting, any guage, thickness, including Nainital or similar pattern roof coverings, ridges, hips, valleys and flashings complete all as specified and directed. |
| 30 | Dismantling timber scantling 40 Sqcm and over in section, in any position etc complete all as specified and directed. |
| 31 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 32 | Rolled section conforming to Fe-290 (grade E-165) as in purlins, rafter, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 33 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of colour as approved having tensile strength of 550 MPa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 34 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour as approved having tensile strength of 550 MPa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 35 | Galvanised, corrugated mild steel sheeting of thickness 0.63 mm with two corrugations side lap, fixed with fixed with L-type or J-type or cranked hook in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed. |
| 36 | Plain, galvanised, mild steel sheeting of thickness 0.80 mm , in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed. |
| 37 | PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping, bed plates benching, floor by maintaing required gradient/ undulation etc slightly rounded or chamferred angles and throating, including necessary formwork complete all as specified and directed. |
| 38 | Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed. |
| 39 | Preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed. |
| 40 | Dismantling of wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards/ slabs/ blankets any thickness, including cover fillets including removal of Debries outside Cantt area complete all as specified and directed. |
| 41 | False ceiling of 9.5 mm thick gypsum tiles (600mm x 600mm) laminated with PVC film on the face side and metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/ Cross-T/ Wall angle/ level clip and suspenders of standard galvanised sections in a grid size of 600mm x 600mm including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed. |
| 42 | PVC wall panelling made up of PVC hollow panels 25cm/ 30cm in width and 10 mm thickness interlocking pattern of approved shade and design fixed to walls or ceiling complete all as specified and directed. |
| 43 | PVC Louvers panel made up of PVC panels 15 cm in width and 23 mm thickness fluted type interlocking pattern of approved shade and design fixed to walls complete all as specified and directed.Note: Material manfactured by MES approved firms/ ISI approved firms shall only be used in the work. |
| 44 | 5 mm thick PVC sheet corner fillet of width 35 mm for opening wall paneling inclusive of fixing on to walls to make PVC frame as per specification and drawing complete all as specified and directed. |
| 45 | Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed. |
| 46 | Taking down chowkats or frames with shutters (with out taking off shutters from the frames) not exc 1.5 Sqm each complete all as specifed and directed. |
| 47 | Taking down shutters of any description exc 1 sqm and not exc 2 Sqm each complete all as specified and directed. |
| 48 | Taking down, easing and adjusting shutters of any description, exceeding. 1.00 Sqm and not exceeding 2.00 Sqm each and re-fixing in the same or other opening complete all as specified and directed. |
| 49 | Factory made solid PVC Door Frames of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S.Square tube, suppling and fixing in opening as per specification complete all as specified and directed. |
| 50 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed. |
| 51 | Pressed steel frames for doors of size 105mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one coat of shop coat complete all as specified and directed. |
| 52 | Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one coat of shop coat complete all as specified and directed. |
| 53 | Factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 54 | 2nd class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and directed. |
| 55 | Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 56 | Preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 57 | Preparation of old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 58 | Taking down existing aluminium door/ window and refixing to the same opening after repairing, easing and adjusting incl replacement of damaged hinges, brass mortice lock, sheet glass, door closer, elco panel , floor spring, rubber neoprene packing, aluminium beading, glazing clips and stainless steel screws complete all as specified and directed (Mortice lock, sheet glass, hydraulic door closer, floor spring and composit panel to be measured and paid seperately under supply only). |
| 59 | Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. having minimum thickness of powder coating 50 micron including taking down complete all as specified and directed. |
| 60 | Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.incl powder coating of any colour not less than 50 micron thickness complete all as specified and directed. |
| 61 | Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.), hinges type B-21 100 mm long (2 No.) suitable handle (1 No.) including powder coating of minimum thickness of powder coating not less than 50 micron complete all as specified and directed. |
| 62 | Aluminium (extruded section body) door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 Kg and fixed complete all as specified and directed. |
| 63 | Sheet glass 4.8 mm thick, ordinary quality fixed with aluminium beading and rubber gasket exc 0.50 Sqm each complete all as specified and directed. |
| 64 | Aluminium 4 Lever Mortice lock, vertical type of size 100 mm complete all as specified and directed. |
| 65 | Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 66 | Aluminium 4 Lever Mortice lock, vertical type of size 100 mm, fixed in repairs complete all as specified and directed. |
| 67 | 4 mm thick Aluminium composite panel for fixing to aluminium shutter and the like squares with aluminium beading/ gasket complete all as specified and directed. |
| 68 | Pre laminated lead free factory made 12 mm (+/- 0.7mm) thick 100% solid NFC (Natural fiber composite) sheet having high natural fiber content 25% to 30% wood colour sheet having density not less than 600 Kg/Cum and should be 100% termite/ water proof, fire retardant, eco friendly, finish at all edges for making edges lipping/ bending, manfactured by single layer extrusion process with excellent screw holding capacity and shore D hardness, fixed in repairs complete all as specified and directed. |
| 69 | Plain cement concrete (1:3:6) type C-0 ( using 12.50 mm graded crushed stone aggregate) as in filling of door frames complete all as specified and directed. |
| 70 | Butt hinges of size 100 mm length, extruded aluminium alloy with galvanished mild steel hinges pin, anodized and fixed, type C-21 complete all as specified and directed. |
| 71 | Alluminium, anodized, barrel tower bolts 150 mm extruded section complete all as specified and directed. |
| 72 | 150 mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and directed. |
| 73 | Aluminium alloy sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia and including a minimum of 6 bolts and nuts, four on bolt type and two on staple plate 250 mm long complete all as specified and directed. |
| 74 | Floor door stopper 150 mm length of cover plate of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 75 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ spribng clips and providing and fixing new ones exc 1.5 Sqm complete all as specified and directed. |
| 76 | 3 mm thick sheet glass, ordinary quality & glazing with oil putty/ wooden beading/ rubber packing around the glass in square not exc 0.5 Sqm in each pane, including hacking out old glass of any description complete all as specified and directed. |
| 77 | 4 mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beading/ rubber packing around the glass in square exc 0.5 Sqm in each pane including hacking out old glass of any description complete all as specified and as directed. |
| 78 | Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm fixed with tinned tacks, or galvanised wire staples wire complete all as specified and directed. |
| 79 | Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm fixed with tinned tacks, or galvanised wire staples wire, fixed in repairs complete all as specified and directed. |
| 80 | Rotational moulded polyethylene water storage tanks three layered white in colour of 500 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20 mm thick ball valves high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including dismantling of old broken water tanks and refixing of inlet, outlet and over flow pipe etc complete all as specified and as directed. |
| 81 | Rotational moulded polyethylene water storage tanks three layered white in colour of 1000 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20 mm thick ball valves high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including dismantling of old broken water tanks and refixing of inlet, outlet and over flow pipe etc complete all as specified and as directed. |
| 82 | 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminum rod and high-density plastic ball screwed for iron pipe and fixed (minimum weight 15 mm - 142 gms / 20 mm - 210 gms / 25 mm - 455 gms / 40 mm -690 gms), fixed in repairs complete all as specified and directed. |
| 83 | Taking up or down steel water tubing and connections 15mm bore including cleaning for refixing or removing to store complete all as specified and directed. |
| 84 | Medium grade 15mm bore galvanized tubing with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 85 | Taking up or down steel water tubing and connections 20 mm bore including cleaning for refixing or removing to store complete all as specified and directed. |
| 86 | Medium grade 20 mm bore galvanized tubing with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 87 | Refixing old steel tubing 20 mm bore and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and directed. |
| 88 | 15 mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and directed. |
| 89 | 20 mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and directed. |
| 90 | CP bib taps long body, cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm bore, fixed in repairs complete all as specified and directed. |
| 91 | CP angle or plain stop valves, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore, fixed in repars complete all as specified and directed. |
| 92 | 15 mm bore Pillar taps cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or with out lettred 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for pipes and fixed in repairs, complete all as specified and directed. |
| 93 | CP Central hole wash basin mixer without popup waste system with 450 mm long braided hoses cast copper alloy for iron pipes 15 mm bore, screwed for iron pipe and fixed complete all as specified and directed. |
| 94 | 15 mm dia PVC Connection 450 mm long with brass nuts, fixed in repairs complete all as specified and directed. |
| 95 | 10 litre PVC valve less symphonic action type Low level flushing cistern with inlet ball valve float and handle including CI bracket and 32 mm bore PVC flush pipe and connection to pipe, fixed in repairs complete all as specified and directed. |
| 96 | Towel rail 450 mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats, fixed in repairs complete all as specified and directed. |
| 97 | Glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, fixed in repairs complete all as specified and as directed. |
| 98 | CP Brass shower rose 200mm x 200mm size with flexible brass arm 450mm - 550mm long for 5 mm bore pipe complete all as specified and directed. |
| 99 | Soap dish material stainless steel finish, glossy fixed to plugs with CP brass screws complete all as specified and directed. |
| 100 | Vitreous china squatting pan of patern 'Orissa pattern' size 580 mm x 440 mm white with integral foot rests, flush pipe including provn of cement concrete bedding and making good the dismantled surface in PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) fixed as in repairs complete all as specified and directed. |
| 101 | Wash down water closet (Pedestal pattern), complete, including provision of cement concrete bedding, CI ‘P’ trap 100 mm dia connection to trap and flushing pipe, anti-syphonage, fixed in repairs complete all as specified and directed. |
| 102 | One piece EWC \\"S\\" with slim seat cover and fittings complete, including provision of cement concrete bedding, CI ‘P or S’ trap 100 mm dia connection to trap and flushing pipe, anti-syphonage, fixed in repairs complete all as specified and directed. |
| 103 | Vitreous china wash hand basin white flat back of size 550mm x 400mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts, fixed in repairs complete all as specified and directed. |
| 104 | Vitreous China Urinal, half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) fixed including fixing of CP coupling, waste pipe and CP brass spreader with necessary fittings, complete all as specified and directed. |
| 105 | Plastic water closet seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device, fixed in repairs complete all as specified and directed. |
| 106 | 32 mm bore PVC flexible waste pipe for WHB, fixed in repairs complete all as specified and as directed. |
| 107 | CP Brass Hand Shower (Health Faucet) with 8 mm dia,1.2 m long long flexible tube chrome finish and wall hook for water closet complete all as specified and directed. |
| 108 | 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated bars screws and cup washers complete all as specified and directed. |
| 109 | Chequered cement concrete tiles 20cm x 0cm x 25mm thick, set, jointed with grey cement and no pigment, pointed in neat cement slurry in floor over and including 15 mm thick screed layer in cement mortar 1:6, complete all as specified and directed . |
| 110 | 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches including taking down and removing from site complete all as specified and directed. |
| 111 | 110 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors etc including taking down and removing from site, fixed in repairs complete all as specified and directed. |
| 112 | PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement, laying in repairs, complete all as specified and directed. |
| 113 | PVC SWR pipe 110 mm bends complete all as specified and directed. |
| 114 | 60 mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 grade of approved shape, size and colour conforming to IS 15658-2006 and laid over and including 25 mm thick grid/ sand cushion complete all as specified and directed. |
| 115 | 18mm/ 19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws totimber frame work in cupboard shutter and wall, complete all as specified and directed. |
| 116 | Precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in kerb and edging to road and foot path, etc., including chamferred, weathering, throating etc., and setting in CM 1:4 complete all as specified and directed. |
| 117 | 20mm to 25mm dia stainless steel drapery curtain rod with brass /nickel chrome polish / designer lattos and brackets including taking out old pelmet with curtain rods complete all as specified and directed. |
| 118 | 300 mm long mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 119 | Mild Steel framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces and stair case etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanksand fixing and similar work conforming to Fe-290 grade E-165 complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender