Tender For Special Repair To Bldg No P-88 At Mil Stn Bhuj Under Ge (A) Bhuj.
Tender Value
37.96 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
16 days left
EMD
75920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhuj → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-88 At Mil Stn Bhuj Under Ge (A) Bhuj.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spcified and directed. |
| 2 | M&L Virified Ceramic tiles Dark shade 8 to 9 mm thick (square/rectangular) polished/Matt/Glossy, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in epoxy grout and including 15 mm thick screed bed in CM 1:4, complete all as spcified and directed. |
| 3 | All as above but on vertical surface as in skirting/Dados over 8 to 9 mm thick plaster cm 1:4 complete all as spcified and directed. |
| 4 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as spcified and directed. |
| 5 | Supply and Fix in repairs, seamless ceiling with using 12mm thick, factory made gypsum fiber board, fixed on GI frame work for seamless ceiling suitable for suspended system with and including applying two coats of oil bound distemper over a coat of primer to give even and smooth finish without showing any joints complete all as specified and directed. |
| 6 | M&L for false ceiling work of galvenised MS ceiling grid system 'UNLOCK\\" comprising of main runner 38mmx24mmx0.35mm cross tee 38mmx24mmx0.25mm and GI suspenders 4mm dia fixed to ceiling with and including supply and fixing water proof laminated gypsum ceiling board of size 600x600x 8 mm thick complete all as specified and directed and fixed as per manufacturers instructions complete all as specified and directed. |
| 7 | Demolition of pre-cast concrete block masonry built in cement mortar of any description in any position complete all as spcified and directed. |
| 8 | M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed. |
| 9 | Dismantling Prelaminated particle boarding, any description, fixed in any position with screws complete all as spcified and directed. |
| 10 | S&F WPC (Wood Polymer Composite) solid wall lining consisting of 9 mm thick any coulour and any pattern WPC sheet inclusive of solvent cement and fixing at site on WPC frame as per specifications complete all as spcified and directed. |
| 11 | S&F Powder coated Aluminium frame for doors, windows, ventilators and partition with or more rebates incl. jointing cleat for fixing etc complete all as spcified and directed. |
| 12 | S&F sheet glass 4 mm thick ordinary quality and glazing with oil putty or rubber beads complete all as spcified and directed. |
| 13 | S&F for Galvanised mild steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm, complete all as spcified and directed. |
| 14 | S&F powder coated Anodised aluminium window and ventilator shutters, fixed/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as spcified and directed. |
| 15 | Taking down chowkat or frames exc 1.5 sqm & n exc 4 sqm with shutters without taking off shutters from the frame and removing to store complete all as spcified and directed. |
| 16 | Taking down chowkat or frames n.exc 1.5 sqm with shutters without taking off shutters from the frame and removing to store complete all as spcified and directed. |
| 17 | M&L for 12 mm thick toughened glass as in partitions,glass doors,Windows all SS fiting required and work stations including all necessary chemicals S/S pivot and all S/S fiting and including sliding channel for door required making good selicon filling in all gap as directed. (Make : Saint Gobain) |
| 18 | S & F powder coated anodised Aluminium alloy sections sliding windows with frames 92 X29.6 X1.10mm , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note : Making all edges i.e. cill and jamb good by cement mortar 1:3 |
| 19 | Demoltion of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as spcified and directed. |
| 20 | M&L for 20mm thick Granite jet Black (of any type) work (table rubbed and polished) in cooking plateform, Jambs cill and like set in cement mortar (1:4) inlcuding pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including rounding of exposed edges of slab smoothly and polished complete all as specified and directed. |
| 21 | M/L for providing cement concrete 1:2:4 type B2 using (40mm graded stone aggregate) lintels upto 1.5m clear span, complete all as specified and directed. |
| 22 | M&L for Form work to sides and soffits of floor or roof RCC beam sides of lintel beam flat rough finish surfaces to receive the plaster, complete all as specified and as directed. |
| 23 | M&L for Form work to edges of concrete flats, floor and roofs not exceeding 20cm wide (horizontal or sloping), rough finish surfaces complete all as specified and as directed. |
| 24 | M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns , beam and slab hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as spcified and directed. |
| 25 | Taking down cement plaster, any description, on brick or blockor stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed |
| 26 | M&L for rendering 15 mm thick in CM 1:6 over block or stone masonary, concrete surfaces, finished even and smooth (without using extra cement), complete all as spcified and directed. |
| 27 | M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as spcified and directed. |
| 28 | M & L existing treatment on old walls and applying two coat of distemper oil emulsion complete all as specified and directed. |
| 29 | S&F (concealed / open)20 mm outer dia CPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified complete with fitting including taking down existing GI tubing 15mm bore complete all as spcified and directed. |
| 30 | S&F (concealed / open) 25mm outer dia CPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified complete with fitting including taking down existing GI tubing 15mm bore complete all as spcified and directed. |
| 31 | M& L for applying Cement putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete as all specified and directed. |
| 32 | M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering,brushing etc , filling in cavities and cracks etc with approved filler and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as spcified and directed. |
| 33 | M & L existing treatment on old ceiling and applying two coat of distemper oil emulsion complete all as specified and directed. |
| 34 | M&L for preparing old painted surfaces of steel and iron surfaces over 10 cm in width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as spcified and directed. |
| 35 | Taking down carefully copper/alumunium point wiring for light, fan, bell, socket or power complete including fittings such as switches, ceiling roses pendents regulators, sockets and tube light fittings etc, removing materials from site or for reuse refixing and making good distrubed surface of wall, floors etc complete all as spcified and directed. |
| 36 | Taking down main switches from DBs with sheet metal enclosure 08/04 way SPN/TPN DBs etc complete all as spcified and directed. Please Enable Macros to View BoQ information |
| 37 | Taking down main switches from DBs with sheet metal enclosure 08/04 way SPN/TPN DBs etc complete all as spcified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender