Tender For Repair To Roof, Perimeter Fencing, Pathway, Cgi Sheets, Plinth Protection And Certain Misc Wks At Sector B Under Age B/R-Ii Of Ge 865 Ews
Tender Value
47 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
10 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Roof, Perimeter Fencing, Pathway, Cgi Sheets, Plinth Protection And Certain Misc Wks At Sector B Under Age B/R-Ii Of Ge 865 Ews
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Jul-2026 | REVISED BOQ | BOQ | 22-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fix of 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screw and washers, in roofs, walls etc with grade of zinc coating 275 incl taking down of existing sheeting complete all as specified and directed. |
| 2 | Supply and fix 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 incl taking down of existing sheeting complete all as specified and directed. |
| 3 | Material and labour pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl taking down of existing sheeting complete all as specified and/or directed by Engr-in-Charge. |
| 4 | Material and labour pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge/flushing fixed with self tapping screws including taking down complete all as specified and/or directed by Engr-in-Charge. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and/or directed by Engr-in-Charge. |
| 6 | Supply and fix for rolled mild steel work in roof trusses (framed) trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe 410- W (Gde-E-250 quality A), complete all as specified and directed. |
| 7 | Supply and fix for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and similar work conforming to grade Fe 410- W (Gde-E-250 quality A), complete all as specified and directed. |
| 8 | Dismantling chain link fencing wiremesh any type, complete all as specified and directed. |
| 9 | Dismantling posts or struts (steel or RCC) any section embedded in concrete, brick work etc. including taking out embedded portion complete all as specified and or/ as directed by Engr-in-Charge. |
| 10 | Excavating in post holes in hard/dense soil (of similar holes) each not exc. 0.50 cum getting out, returning, filling in, and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm, watering and removing surplus soil to a distance not exc. 50 m and making good surface, complete all as specified and/or as directed by Engr-in-Charge. |
| 11 | Supply and fix angle iron with swan neck as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engr-in-charge. |
| 12 | Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and/or as directed by Engr-in-Charge. |
| 13 | Supply only chain link MS galvanised wire chain link fencing square mesh of any size made out of any size wire, complete all as specified and/or as directed by Engr-in-Charge. |
| 14 | Supply and fix mild steel screw bolt 5 to 10 mm dia (machine made) with hexagonal head at one end and screwed the other, screwed end to be fitted with one washer and hexagonal nut length exc. 5cm but not exc. 10 cm long, complete all as specified and/or as directed by Engr-in-Charge. |
| 15 | Supply and fix in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbed at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and/or as directed by Engr-in-Charge. (each line of wire to be measured). |
| 16 | Material and labour for preparation of new/ previous untreated steel surface of any description over 10 cm grith or width, not otherwise described with one coat of red oxide zinc chrome primer followed by two coats of synthetic enamel paint, complete all as specified and/or as directed by Engr-in-Charge. |
| 17 | Material and labour PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate), as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs not provided, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and/or as directed by Engr-in-Charge. |
| 18 | Taking down existing water proofing treatment including cement plaster and cleaning with wire brushes roughening the surface and hacking out dirt, where directed and disposal of rubbish to a distance not exc. 100 m from the site. |
| 19 | Material and labour for 25 mm thick PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in padding on roof top finishing even and smooth without using extra cement to proper slope including mixing WPC as per manufacturer's instructions, complete all as specified and as directed.Note : WPC to be measured and paid separately. |
| 20 | Material and labour for rendering 5 mm thick cement plaster in CM 1:4 on concrete surface finished even and smooth without using extra cement including mixing with water proofing compound as per manufacturer's instructions, complete all as specified and directed. Note : WPC to be measured and paid separately. |
| 21 | Material and labour for priming surfaces and applying normal treatment (for moderate condition) for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforcement with polyster non woven fabric (weight not less than 150 gms/sqm) and applying two coats of aluminium paint on top of membrane, complete all as specified and/or as directed by Engr-in-Charge. |
| 22 | Supply only Integral water proofing compound. |
| 23 | Material and labour for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) in alternate bay as in plinth protection 1.20 sqm each, 12 mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume) all as specified. Note : The unit rate include for use of form work (straight or curved). |
| 24 | Demolition of unreinforced cement concrete in ground floors and paving not exc. 15 cm thickness (below or above ground level) and removing demolished material to a distance not exc 100 m from the site, complete all as specified and directed by Engineer-in-Charge. |
| 25 | Taking down chowkat or frame with shutters (without taking of shutters from the frame) exc. 1.5 sqm each but not exc 4 sqm each any type of door (wooden, aluminium & steel etc.) complete all as specified and/or as directed by Engr-in-Charge. |
| 26 | All as per Srl item No 25 above, but not exc. 1.5 sqm. |
| 27 | Taking down shutters of any description exc. 1 sqm but not exc. 2 sqm each complete all as directed by Engr-in-Charge. |
| 28 | Supply and fix solid PVC door frame of size 50 x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube, in opening, complete all as specified and directed. |
| 29 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20 mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame wedded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 30 | Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, battens for grids of ceiling & lining wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and directed. |
| 31 | Supply and fix for 30 mm thick 2nd class hard wood plain framed paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supply and fixed to chowkats, complete all as specified and directed. |
| 32 | Supply and fix 30 mm thick 2nd class hard wood glazed and skelton shutter, open and prepared to receive the glass, gauze etc. (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. complete all as specified and directed |
| 33 | Supply and fix for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides, supply and fixed to chowkats, complete all as specified and directed |
| 34 | Material and labour PCC 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in hold fast, bed block and like of any description, complete all as specified and directed. |
| 35 | Supply and fix 18/19 mm thick block / MDF boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work including dismantling, complete all as specified and directed. |
| 36 | Supply and fix for continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap (when open) 40 mm, complete all as specified. |
| 37 | Supply and fix 100 mm long mild steel butt hinges, medium weight cold rolled, complete all as specified and as directed. |
| 38 | Supply and fix 200 mm long aluminium anodized, barrel tower bolt of extruded section and fixed, complete all as specified and/or as directed by Engr-in-Charge. |
| 39 | Supply and fix 150 mm long aluminium anodized, barrel tower bolt of extruded section and fixed, complete all as specified and/or as directed by Engr-in-Charge. |
| 40 | Supply and fix 100 mm anodised aluminum handles, fabricated type. |
| 41 | Supply and fix 125 mm anodised aluminum handles, fabricated type. |
| 42 | Material and labour for hasp and staple size 100 mm, aluminium anodised, including bolt to hinge plate and fixed with screws, complete all as specified and/or as directed by Engr-in-Charge. |
| 43 | Supply and fix 200 mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed, complete all as specified and/or as directed by Engr-in-Charge. |
| 44 | Supply and fix stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staples, complete all as specified and as directed. |
| 45 | Supply and fix in repairs stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and as directed. |
| 46 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames fixed with putty or beads, complete all as specified and/or directed by Engr-in-Charge. |
| 47 | Supply and fix 3mm thick transparent fibre glass ordinary quality as in glazing not exc. 0.50 sqm in each pane fixed in wood or steel frames with oil putty or wooden beads or self tapping screw complete all as specified and directed. |
| 48 | Supply and fix for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.50 sqm in each pane, complete all as specified and/or directed by Engr-in-Charge. |
| 49 | Supply and fix 4mm thick figured glass, pin head type and glazing with oil putty in squares not exc. 0.5 sqm in each pane, complete all as specified and/or directed by Engr-in-Charge. |
| 50 | Demolition of brick work built in cement mortar including all quoins, arches, pillar including coping etc. complete all as specified and/or directed by Engr-in-Charge. |
| 51 | Material and labour precast solid blocks in cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in block masonry, exc.10 cm in width and set in cement mortar 1:6, complete all as specified and/or directed by Engr-in-Charge. |
| 52 | Taking down cement plaster on brick/PCC block or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and/or as directed by Engr-in-Charge. |
| 53 | Material and labour for 15mm thick rendering on fair faces of block / brick work or concrete surfaces of wall finished even and smooth without using extra cement in cement mortar 1:6, complete all as specified and as directed by Engineer-in-Charge. |
| 54 | Material and labour for 15mm thick rendering on fair faces of block / brick work or concrete surfaces of wall finished even and smooth without using extra cement in cement mortar 1:4, complete all as specified and as directed by Engineer-in-Charge. |
| 55 | Material and labour for preparing newly plastered surfaces of wall and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistant priming paint, complete all as specified and/or as directed by Engr-in-Charge. |
| 56 | Material and labour for preparation of new plastered wall surface of any description and applying two coats of cement base paint over a coat of chalk whiting complete all as specified and/or as directed by Engr-in-Charge. |
| 57 | Material and labour for joint free non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exc. 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed and bedding layer in CM 1:6 for laying floors finishes incl dismantling floor tiling including CM bedding (but not backing), removing serviceable tile to store and rubbish off the premises, complete all as specified and/or as directed by Engr-in-Charge. |
| 58 | Material and labour for joint free non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exc. 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed and bedding layer in CM 1:6 for laying floors finishes incl dismantling floor tiling including CM bedding (but not backing), removing serviceable tile to store and rubbish off the premises, complete all as specified and/or as directed by Engr-in-Charge. |
| 59 | Material and labour for vitrified ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles including 15 mm thick screed bed and bedding layer in CM 1:6 for laying floors finishes incl dismantling floor tiling including CM bedding (but not backing), removing serviceable tile to store and rubbish off the premises, complete all as specified and/or as directed by Engr-in-Charge. |
| 60 | Material and labour for vitrified ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles including 15 mm thick screed bed and bedding layer in CM 1:6 for laying floors finishes incl dismantling floor tiling including CM bedding (but not backing), removing serviceable tile to store and rubbish off the premises, complete all as specified and/or as directed by Engr-in-Charge. |
| 61 | Material and labour for glazed ceramic coloured tiles in vertical surfaces of size 450x350x7mm/ 350x250x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over and including rendering 10 mm thick in cement mortar (1:4) as in backing coat including dismantling of tiles, removing serviceable tiles to store and rubbish off the premises complete all as specified and/or as directed by Engr-in-Charge. |
| 62 | Material and labour for machine cut Kota stone slab flooring 14-16 mm thick over cement screed bed 20mm thick in CM 1:4, set and jointed in neat cement slurry laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including dismantling of existing stone slab flooring/ skirting, complete all as specified and/or as directed by Engr-in-Charge. |
| 63 | Material and labour for Kota stone slab 14-16mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 10 mm screed bed in CM 1:4 including dismantling of existing stone slab flooring/ skirting, complete all as specified and as directed. |
| 64 | Supply and fix 25 mm dia 3 layer PP-R polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacturer's instructions and as directed by Engr-in-Charge including taking up or down 25 mm bore steel tubing / PPR pipe and connections and set aside for re-use or removal to store. |
| 65 | Disconnection of existing PVC/ferro cement/MS tank of capacity exc. 250 ltr but not exc. 500 ltr for cleaning and removing all scale and dirt etc. from tanks and from mouth circulating pipes etc. and hoisting if required, reconnecting and re-fixing in position, all as directed by Engr-in-Charge. |
| 66 | Disconnection of existing PVC/ferro cement/MS tank of capacity exc. 500 ltr but not exc. 1000 ltr for cleaning and removing all scale and dirt etc. from tanks and from mouth circulating pipes etc. and hoisting if required, reconnecting and re-fixing in position, all as directed by Engr-in-Charge. |
| 67 | Supply and fix 500 litres capacity rotational moulded polyethylene water storage tank inner and out white, two layers ISI marked (cylindrical vertical, with closed top), hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (i.e. GI nipple etc.), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling existing water tank and removing to store, complete all as specified and as directed by Engr-in-Charge. |
| 68 | Supply and fix 1000 litres capacity rotational moulded polyethylene water storage tank inner and out white, two layers ISI marked (cylindrical vertical, with closed top), hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (i.e. GI nipple etc.), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling existing water tank and removing to store, complete all as specified and/or as directed by Engr-in-Charge. |
| 69 | Supply and fix in repairs 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, as in floor and trenches, complete all as specified and/or as directed by Engr-in-Charge. |
| 70 | Supply and fix in repairs 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls with stack clamps, complete all as specified and/or as directed by Engr-in-Charge. |
| 71 | Supply and fix in repairs 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, as in floor and trenches, complete all as specified and/or as directed by Engr-in-Charge. |
| 72 | Supply and fix in repairs 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls with stack clamps, complete all as specified and/or as directed by Engr-in-Charge. |
| 73 | Supply and fix 110 mm bore, PVC (SWR) junction, (single T) equal or unequal, complete all as specified and/or as directed by Engr-in-Charge. |
| 74 | Supply and fix 75 mm bore PVC (SWR) junction, (single T) equal or unequal, complete all as specified and/or as directed by Engr-in-Charge. |
| 75 | Material and labour 75 mm size PVC (SWR) floor trap, plain with grating including jointing with solvent cement, with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete including taking down old unserviceable floor trap, complete all as specified and/or as directed by Engr-in-Charge. |
| 76 | Supply and fix 75 mm bore PVC (SWR) bends, complete all as specified and/or as directed by Engr-in-Charge. |
| 77 | Supply and fix 110 mm bore PVC (SWR) bends, complete all as specified and/or as directed by Engr-in-Charge. |
| 78 | Supply and fix in repairs brass chromium plated tubular towel rail, 20 mm dia, D type 60 cm long, fixed to wall with CP brass screw and PVC rawl plugs, complete all as specified and/or as directed by Engr-in-Charge. |
| 79 | Supply and fix brass chromium plated mixer for mixing hot and cold water, screwed down for iron pipe for 15 mm dia bore pipe, fixed in repair, complete all as specified and/or as directed by Engr-in-Charge. |
| 80 | Supply and fix in repairs 32 mm waste coupling of PTMT (half or full threaded) (min weight - 60 gms), complete all as specified and/or as directed by Engr-in-Charge.specified and directed. |
| 81 | Supply and fix in repairs 40 mm waste coupling of PTMT (half or full threaded) (min weight - 60 gms), complete all as specified and/or as directed by Engr-in-Charge. |
| 82 | Supply and fix in repairs plastic water closet seat, black or white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, complete all as specified and/or as directed by Engr-in-Charge. |
| 83 | Supply and fix in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and/or as directed by Engr-in-Charge. |
| 84 | Supply and fix in repairs flexible waste pipe for sink, wash basin/urinal, complete all as specified and/or as directed by Engr-in-Charge. |
| 85 | Supply and fix in repairs PVC connection 15 mm size, 600 mm long with PTMT nuts, complete all as specified and/or as directed by Engr-in-Charge. |
| 86 | Supply and fix in repairs 15 mm bore PTMT ball valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule, complete all as specified and/or as directed by Engr-in-Charge. |
| 87 | Supply and fix in repairs 20 mm bore PTMT ball valves, high pressure, with polythene float and fly nuts complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and/or as directed by Engr-in-Charge. |
| 88 | Supply and fix in repairs 15 mm bore PTMT bib tap any colour high pressure, screwed for iron pipe or brass ferrule and fixed (min weight - 90 gms), complete all as specified and/or as directed by Engr-in-Charge. |
| 89 | Supply and fix in repairs 25 mm bore PPR Gate valve (brass insert) screwed for PPR pipe or brass ferrule, complete all as specified and/or as directed by Engr-in-Charge. |
| 90 | Supply and fix of wooden panelling on wall/ceiling using following specifications including taking down old wooden panelling, complete all as specified and directed :-(i) Supply and fix 2nd class hard wood wooden gutties of size 25 x 25 x 200 mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3.(ii) Supply and fix horizontal runner 2nd class soft wood @ 1.2 m C/C cross sectional area exc. 13 sqcm and 25 sqcm clean swan with nails or screws, treated with two coats of cerosite oil mixed with good quality pesticide for antitermite treatment.(iii) Supply and fix 2nd class soft wood (Deodar) boarding (knottypine) 12 to 15 mm thick as in wall panelling planed one side, wrought and other side clean sawn and applying two coats of good quality varnish on plain surfaces over a coat of primer mixed with good quality pesticide for antitermite treatment on the other side and fixed with screws/nails on wooden runners.(iv) Supply and fix 1st class soft wood (Deodar) decorative beading 40 mm wide on top surface of wall panelling including two coats of varnish. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 22, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender