Tender For Repair To Certain Roads Under Aor Of Age B/R - Iv Under Ge (S) Meerut Cantt.
Tender Value
1 Crore
Estimated cost
Bid Submission
29 Jul 2026
21 days left
EMD
1.75 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Certain Roads Under Aor Of Age B/R - Iv Under Ge (S) Meerut Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Repair to pot holes any depth n.exc 1 sqm each incl sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc cutting around edges to at lest 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and making good by applying tack coat at 5 kg per 10 sq m. putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again will rammed (including supply or premixed macadam, binder and chippings), depth of potholes exc 30mm complete all as specified and directed. |
| 2 | M&L for 75mm thick (compacted thickness) WBM, with Lime stone sand stone Flint or Quartzite coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled & consolidated to gradient materials & camber required including scarifying the existing surface exc 50 mm & n.exc 100 mm deep complete all as specified and directed. |
| 3 | M&L for Preparation of newly WBM surfaces of roads by brushing with mechanical means, wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying by providing evenly a priming / tack coat with bituminous primer (VG-10) viscosity grade @ 10 Kg per 10 Sqm complete all as specified and directed. |
| 4 | Supplying & fixing in repair of retro-reflectorised traffic sign boards by providing and fixing new retro-reflectorised cautionary, mandatory and informatory sign as per ASTM D 4956-04 made of High intensity grade Microprismatic sheeting Type-IV, fixed over aluminium sheeting 2.0 mm thick of size 1400mmx1000mm supported on a Stainless steel of grade 304 Frame comprising of hollow square section of size not less than 25mm. This frame is further welded to hollow circular section of outer dia not less than 50mm size, 2.4 meter high vertical post complete as per drawing. This vertical post shall be embeded in M15 grade cement concrete in a pit of size 300mm X 300mm X 450 mm, 450 mm below ground level complete in all respect as per direction of the Engineer. Note- The rate quoted by the contractor shall be inclusive of forming letters with retro-reflective taping as per the site requirements and all as per the direction of Engineer-in-charge. |
| 5 | M& L for Preparing surfaces by brushing in Black top with mechanical means ,wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bages to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer(VG-10) at the rate 05 kg per 10 sq meterscompleted as pecified and directed. |
| 6 | M&L for Premix bitumious macadam mixed with paving bitumen @ 4% binder (viscosity grade VG-30) viscocity grade mixed in hot mix plant transported to site on tippers and laid with mechanical paver, laid/rolled and compacted to required gradient and camber (consolidated thickness n. exc 75mm ) with 8 to 12 ton power roller complete all as specified and directed. Note-(a) 5 nos of core cutter test to be carried out by contractor on his own cost before laying of SDAC on BM surface at location directed by Engineer-in-charge and test report to be submitted before processing RAR/Payment.(CTL/IIT Rorkee /any Govt Institution as approved by GE) (b) The unit rates are worked out on the basis of binder content of 4% by total mix. Any addition/deduction in the actual binder content used, the rate shall be adjusted as per given in SSR-II. |
| 7 | M&L for Bituminous premixed semi dense asphaltic 30 mm thick (consolidated thickness) with 5.5% binder content by wt of total mix paving bitumen (VG-30) viscocity grade mixed in hot mix plant transported to site on tippers and laid with mechanical paver, and roled to uniform smooth surface with 8 to 12 tonne capacity power roller and compacted to required camber and gradient and all directed and specified by Engineer-in-charge Note-(a) 5 nos of core cutter test to be carried out by contractor on his own cost after 7 days from date of laying of SDAC at location directed by Engineer-in-charge and test report to be submitted before processing RAR/Payment.(CTL/IIT Rorkee /any Govt Institution as approved by GE) (b) The unit rates are worked out on the basis of binder content of 5.5% by total mix. Any addition/deduction in the actual binder content used, the rate shall be adjusted as per given in SSR-II. |
| 8 | M& L for cleaning the road surface of dirt, seals oil.grese and foreign materials etc and applying 2 mm thick road marking strips (Rectro reflective) of white colour or yellow using hot thermoplastic material by filly/semi automatic thermo plastic paints applicator machine fitted with profile shoe heater drive by operator on road surfaces complete all as specified and directed. |
| 9 | Supply and fixing in repair cat eye solar reflective type of ABS body of size 100mm x 90mm x 20mm with two way prismatic reflector fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 10 | Supply and fixing in repair Solar Cat Eye: Solar Cat eye (Stud) shall be confirming to IRC 35: 2015 or Latest. Solar road stud having 3 LEDs of colour red/yellow to a side (total 6 Nos.) housed in a tough pressure casted aluminum alloy of any size (120 x 130 mm), (100x130mm) and (125x125mm) with built in stem of suitable length for fixing with epoxy. LEDs, solar-cells, battery & light sensor well protected inside under tough unbreakable polycarbonate transparent sheet roof. System workable for 2-3 days (nights) after full charge in 8-10 hours. The bidder shall submit a two year warranty for satisfactory field performance. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4280 |
| 11 | M&L for 75 mm thick cement concrete 1:5:10 type D-2 using (40 mm graded stone agg) as in sub base including demolition of old pcc complete all as specified and directed. |
| 12 | M&L for 80 mm thick, interlocking paver block PCC type M-40 with grey cement & pigment, of shape approved by GE, in paths over & including 25 mm thick sand cushioning bed complete all as specified and directed including demolition of old cement concrete any description any type. |
| 13 | S& in repair speed breaker providing rounded (of 17 meter radius) hump of 1.0 meter width and 0.1RM meter height, with premixed bitumenous macadam 75 mm thick mixed with paving bitumen binder VG-30 Viscosity grade ( considering binder content @4% by wt of total mix), applying providing and laying bituminous premixed asphaltic semi dence concrete 40 mm thick consolidated thickness with machanical paver mixed at hot mix plant, transported to site on tippers,stone chipping mixed with 5.5% by weight of total mix of paving binder (VG-10) viscosity grade by weight of total mix rolled to uniform smooth surface with 8 to 10 tone power roller to required gradient complete all as specified and directed. |
| 14 | Providing and laying in repair at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 15 | M&L for preparation of old concrete surface of any description any type and applying to 1 coat of synthetic enamel paint (colour combination as directed by Engineer in charge) over the prepared surface complete all as specified and directed. |
| 16 | M&L for cement concrete Type B1 (20 mm graded aggregate) as , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender