Tender For Preventive Maintenance Of Pumps, Submersible Pumps And Motors Of Various E/M Installations Under Age E/M-Ii Of Ge 865 Ews
Tender Value
45 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
13 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Preventive Maintenance Of Pumps, Submersible Pumps And Motors Of Various E/M Installations Under Age E/M-Ii Of Ge 865 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Supply, laying, fixing, jointing and testing LT PVC insulated and PVC sheathed single core cable, with copper conductor, heavy duty 1100 volts grade of 25 sqmm complete including taking down of existing unserviceable cable all as specified laid in trenches/ laid under floor or wall in flexible PVC pipe etc. complete all as specified and/or as directed by Engr-in-Charge.Note : Excavation and earth work shall be measured and paid separately. |
| 2 | All as per Srl item No 1 above, but of size 16 sqmm. |
| 3 | Taking down and replacement of MCCB, 4 pole, 160 Amp, ICU = 36 KA, 415 Volts, 50 Hz, AC with fixed terminal and magnetic release duly connected with copper spreader links and proper size lugs, nuts, bolts and washers for proper connection, complete all as specified and/or as directed by Engr-in-Charge. |
| 4 | Taking down and replacement of MCCB, 4 pole, 200 Amp, ICU = 36 KA, 415 Volt, 50 Hz, AC with fixed terminal and magnetic release duly connected with copper spreader links and proper size lugs, nuts, bolts and washers for proper connection, complete all as specified and/or as directed by Engr-in-Charge. |
| 5 | Cutting, facing of existing mild steel cold drawn ERW column pipe 100 mm dia to desired length and re-threading up to 80 mm run to suitable existing coupling complete all as specified and or/ as directed by Engr-in-Charge. Note :- Rate quoted by tender shall be deemed to include all transportation charge from site to work shop and back including loading / unloading. |
| 6 | Cutting, facing of existing mild steel cold drawn ERW column pipe 80 mm dia to desired length and re-threading up to 80 mm run to suitable existing coupling complete all as specified and or/ as directed by Engr-in-Charge. Note :- Rate quoted by tender shall be deemed to include all transportation charge from site to work shop and back including loading / unloading. |
| 7 | Taking out rusted after disorienting old worn pump MS foundation bolt from cement concrete foundation base and fixed by providing new mild steel full threading bolt of 20 mm dia not exc. 300 mm long with proper cement concrete foundation 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) and making the surface smooth to match with existing surface, complete all as specified and/or as directed by Engr-in-Charge. |
| 8 | Supply and fix phase sequence changer of any type / make capacity 15 HP to 52 HP including wiring as required, complete all as specified and/or as directed by Engr-in-Charge. |
| 9 | Taking down of RYB phase indicator and renewal of RYB phase indicator of any size and type on LT panel, complete all as specified and/or as directed by Engr-in-Charge. |
| 10 | Supply and fix in repair digital Ammeter 96 mm square flush mounted type 0-200 Amp, 3 phase, complete all as specified and/or as directed by Engr-in-Charge. |
| 11 | Supply and fix in repair digital voltmeter 96 mm square flush mounted type 0-450 Volt, 3 phase, complete all as specified and/or as directed by Engr-in-Charge. |
| 12 | Dismantling the existing rubber/fiber board gasket flanged joint and replacing it with new joint including nuts, bolts and washer of appropirate size, complete all as specified and/or as directed by Engr-in-Charge for the following sizes:- |
| 13 | 150 mm dia bore. |
| 14 | 100 mm dia bore. |
| 15 | 80 mm dia bore. Please Enable Macros to View BoQ information |
| 16 | 80 mm dia bore. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender