Tender For Improvement And Rev Ing Of Existing 3 Tpd Bio - Methanation Power Plant At Tnhb Phase - I Ward No.19 In Arcot Municipality ( 15Th Cfc- 2024-25 Tied Grant)
Tender Value
70 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
5 days left
EMD
70000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranipet → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement And Rev Ing Of Existing 3 Tpd Bio - Methanation Power Plant At Tnhb Phase - I Ward No.19 In Arcot Municipality ( 15Th Cfc- 2024-25 Tied Grant)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-Jul-2026 | Date Corrigendum | Date | 14-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Removing, Clearing and Refixing of Existing Removing Sluage of Desludging the Digestor & clearing of the Gas pipeline up to conversion point Etc., Completed As directed by the departmental officer. |
| 2 | Re-aligning the Digestor inner wall with Thermophillic insulation for temperature standardisation. UV resistant five layer FRP segments made up of fiber reinforced plastic of five layers 450 emulation glass matt and isopathallic resin and gel coat segments molded in fiber reinforced plastic mould with ribs for strengthening around gas holder, Mild Steel structure inside to support and strengthening the gas holder. Accelator 6% -32110000 - Technical Grade -Industrial Liquid, Royal Brand - Density -0.8Asitone - 2914 (Colourless Liquid- dimethyl ketone) -118324 -Molecular Weight 58.08. Solubility-100 mg/mL at 72°FCatalyst - 2909600Oil Absorption Value - 15 -20. 99 Percent pure Multiple uses Chalk powder.Gelcoat - 39079120 - Removers of Chalky Residue and Scratches- for Fiberglass and gelcoats. Brand - 3M- Prefect - It™ GelcoatMat 450 E - 70193100 - Fiber Chopped Strand Mat - Compatible it h UP,VE,EP,GP Resins. Thickness -300-400GSM. L- 100 Meters- Material: Fiberglass. Glass Tyoe - E- Glass- Packaging Type - Roll,Rasin - Polyster Resing - GP - 39079120- General Purpose Polyster resin for quick curing unsaturated polyster resin. |
| 3 | Hydraulic water testing for leakages in Digestor and arresting of the same at 4' GI Pipe and 1 1/2\\" Pvc pipe Testing in water etc., Completed As directed by the departmental officer. |
| 4 | Supply of Hydraulic Agitator for Digestor - Customized Hydro motor, High pressure Rubber hose, Center rotating pipe, steel housing with bearing, Bottom supporting with steel ball and ball bearing. Power Bank Tank 7307 - Hydraulic Tank. Speed Gear Pump 3052 Hydraulic Motor 315CC. HYD Bell Housing 1p+5HP Gear Coupling M28 1p+3HP (SET). Pressure Gauge Hydraulic Flow control Valve 1/2\\". Mobile Control Valve 2p40. Hydroline Filler Breather FSB 25 Hydroline Suction strainer SC3 015 1.1/4\\". Level Gauge 5\\". Hyd Adaptor Tank fittngs.Hydraulic Adaptor Pressure Line Fittings. HYD Adaptor Suction Line Fittings.. HYD Dummy Plug 1/2\\" GI Pipe Nipple -12*1/2\\". Hydraulic oil 60 Litres. HYD Adaptor Fastners. Hyd Adaptor Service Testing and assembly ChargesElectric motor 2 HP. 3\\" Gipe - 20ft. HYD Hex Nipple 1/2\\"BSP *1/2\\"BSP HYD Hex Nipple 1/2\\"BSP *1/2\\"BSP. HYD Male Tee 1/4\\" BSP. Hydraulic Reducer Bush 1/2\\" M*1/4\\"F2.5\\" Gipe - 20ft. Pillow Block Bearing. Steel Ball holder Steel Shaft 1ft * 62mm thickness with required lathe work.Coupling -Type: Lovejoy |
| 5 | Supply of Food waste shredder - Mild steel 12 gauge / 2.8 mm thickness Customized 2 HP motor grinder with mild steel plate, harden steel blades, grinding size 3mm to 6mm. Heavy duty bearing, over load alarm, easy feeding system.High grade cutters with double stage cleaner.Cutter thickness 11mm, cutter dia 200mm, cutting area 400 mm.Chain couping drive.Helical gear box 33 RPM.IE2 – Foot cum Flange Mount MotorAuto reverse system.Automatic control panel.Overload alarm indication.Easy feeding system.All fabrications with highly safety aspects.One set of spare blades. Foundation, platform and shed as per site requirement |
| 6 | Supply or Safety and Haring unit for Excess Methane gas which Automatic (Solenoid) Main/ Pilot gas line Valves pilot Burner for Providing Maze Hammer PCC Controlled are damper Periziner for Compliance Compuhia. |
| 7 | Supply of Digestor Gas holder UV resistant five layer FRP segments made up of fiber reinforced plastic of five layers 450 emulation glass matt and isopathallic resin and gel coat segments molded in fiber reinforced plastic mould with ribs for strengthening around gas holder, Mild Steel structure inside to support and strengthening the gas holder. |
| 8 | Supply of Biogas Ballon for Raw gas Storage bio gas storage balloons are flexible collapsilde, inter mdiate storage tank designed to hold raw bio gas elimianating the need for conventional metal tank those balloons are Manufautured from high - grade Materials such as PVC - Coated Fabric, neoprene or high - Density polyethylone. (HDPE), Designed to be UV resistant abrasion resistant and Chemically Compatible with methane etc., Complete as directed by the departmental officer. |
| 9 | Supply of Sludge Pump - Submersible Sludge pump 2.00Hp, Three Phase Power - 2Hp, Pipe diameter - 2 inch, Material - ss voltage - 420V speed - 1450RPM, Frequency - 50HZ Etc., Completed as directed by the departmental officer. |
| 10 | Supply of Flow Meter Cloud Based date Collection and analytics with 10Kpa/0.1bar/ 1.45Psi Maximum Pressure reading 2 m3/h Maximum flow rate IP 65 rated ABS (Flame Retardant) enclosure 170 x 117 x 44 mm Enclosure size etc., |
| 11 | Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unshealhed SC.Cu. conductor of 110V grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessories with TW switch box with SA F.T. switch inflush with wall, covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light/fan point (For Electronic regulator) (5 points per coil) SD 22 |
| 12 | Supply and fixing of single box type 4feet 18 Crystal Glass LED Tube Light Fitting complete with electronic ballast with TW round Copper leads from terminals to the fitting. (PWD PageNO 212) |
| 13 | Wiring with 2 x 1.5 sq.mm. (22/03) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS 2.00 No accessories with 150mm x 100mm x 75mm MS switch box inflush with wall with 3mm thick hylum sheet cover for SA 3pin non interlocking flush type CS plug with painting of suitable colour with continuous earthwire connection of 14SWG TC wire for open plug Point (SD - 11) |
| 14 | Wiring with 2 x 4 sq.mm. (56/0.3mm) PVC insulated SC unsheathed copper cable conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS No accessories with 150mm x 100mm x 75mm MS switch box for 15A 3 pin non interlocking CS plug with painting of suitable colour with continuous earth wire connection by 14 SWG TC wire for open power plug point (SD-13 |
| 15 | Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting, Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs, PVC Clamps and screws, making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. |
| 16 | 32mm dia UPVC pipe (pwd-2025-26 Page No. 169 |
| 17 | PVC screw down tap Heavy type 15mm dia (pwd-2025-26 Page No. |
| 18 | 110mm dia pvc pipe 6kg (pwd-2025-26 Page No.158) |
| 19 | 110mm PVC Elbow (pwd-2025-26 Page No.162) |
| 20 | 110mm PVC Tee (pwd-2025-26 Page No.162 |
| 21 | Supply and run of SERVICE CONNECTION ACCESSORIES L.T. 1100V PVC ALUMINIUM ARMOURED UNDER GROUND CABLE WITH ISI MARK 31/2 core 25 sq.mm. PVC Armoured UG Cable etc., Completed Pwd Page No.227 |
| 22 | Supply and fixingof 4Feet LED 20W Fitting with LED20W tube(HigherEnd) complete with conduit pipe suspension from the ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting with tube etc., Completed SD447 |
| 23 | Supply and fixing of 150W LED street light fitting with LED (Higher end) with 40mm dia. Gl pipe (dass B) with 1 no.40 mm dia GI bend complete on the existing post/ on wall with 1.5 sq.mm PVC unsheathed FRLS copper leads with MS clamps and with painting SD 461 |
| 24 | Supply and fixing of 4 X 16 sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75m for covering the cable complete with 2\\" dia PVC pipe etc. Complete |
| 25 | Supply and run of 4 X 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 Gl bearer wire for service connection mains etc, complete as per standard specifications.SD 68 |
| 26 | RE - Commissioning with initial innoculant Installiation and commissioning Shredder, Conveyor Agitators, heating, System Recirculation system Bio gas set and other requipments. |
| 27 | Provision for Goods and Service Tax @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender