Tender For Repairs To Joinery, False Ceiling, Wall Paneling And Other B/R Works At Md Accn And Otm Accn At Nagpur Under Ge K Tee.
Tender Value
25 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
19 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Joinery, False Ceiling, Wall Paneling And Other B/R Works At Md Accn And Otm Accn At Nagpur Under Ge K Tee.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkat with shutter (Without taking of shutter from frame) area exc 1.50 Sqm but nexc 4.00 Sqm each complete all a specified and directed. |
| 2 | Taking down chowkat with shutter (Without taking of shutter from frame) area nexc 1.50 Sqm each complete all a specified and directed. |
| 3 | Taking down shutter of any description exc 1.00 Sqm but n exc 2.00 Sqm each complete all a specified and directed. |
| 4 | Cutting holes for inserting hold fast and making good dismaltled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1as required exc one brick but not exc two bricks complete all as specified and direcrted. |
| 5 | S&F 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints complete all a specified and directed. |
| 6 | S&F Mild steel bands, straps, support clamps, hold fasts etc and similar small articles conforming to Fe-410-0 or 310-0 complete all a specified and directed. |
| 7 | M&L for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making hold fast and fixing in concrete 1:3:6 type CI incl tie bars of 10 mm dia and hold fast of flat iron 40 X 5 mm all complete confirming to Fe 290 (Gde E-165) complete all as specified and directed. |
| 8 | S&F 35 mm thick plain framed panelled factory made shutter made out of IInd class hard wood rail and styles and panel of 12 mm thick veneered particle board or 9 mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1083 (part-I) kiln seasoned an chemically pressure freated of any number of panel all as directed and directed. |
| 9 | S&F 2nd class hard wood 30mm thickness Glazed and skeleton shutters ( Factory made), open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all a specified and directed. |
| 10 | S&F 30mm thick Flush shutters solid core construction with Block board and plywood face panels commercial type both side complete all a specified and directed. |
| 11 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as specified and drawing complete all a specified and directed. |
| 12 | S&F factory made solid flush PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tube for top & bottom rails M.S. frame shall be covered with heat molded wood plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet as for top rail lock rail & bottom rail on either side,all as directed by engr-in charge. |
| 13 | All as per above item 12.00 but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all a specified and directed. Please Enable Macros to View BoQ information |
| 14 | All as per above item 12.00 but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all a specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender