Tender For Repair/ Replacement Fo Street Light, Solar Light, Garden Light, Gate Light And Other Allied Works At 19 Wing & 14 Brd Under Ge (Af) Borjhar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Jul 2026
17 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Fo Street Light, Solar Light, Garden Light, Gate Light And Other Allied Works At 19 Wing & 14 Brd Under Ge (Af) Borjhar
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing FRP cable junction boxes of size 225 x 295 x 122 mm, with five way connector (Heavy duty) terminals for 16-35sq mm, 1100V cable, IP 66, weather proof, outdoor installation type with threaded cable glands & pole mounting brackets with one SP MCB 6 Amps etc complete all as specified & directed. |
| 2 | Supply and fixing FRP cable junction boxes of size 205 x 255 x 112 mm, with five way connector (Heavy duty) terminals for 10 - 25 sq mm, 1100V cable, IP 66, weather proof, outdoor installation type with threaded cable glands & pole mounting brackets with one SP MCB 6 Amps etc complete all as specified & directed. |
| 3 | Supply and fixing FRP cable junction boxes of size 155 x 210 x 92 mm, with five way connector (Heavy duty) terminals for 10 - 16 sq mm, 1100V cable, IP 66, weather proof, outdoor installation type with threaded cable glands & pole mounting brackets with one SP MCB 6 Amps etc complete all as specified & directed. |
| 4 | M &L 2.5 Sqmm, 3 Core Black PVC Insulated Single strand solid Aluminium conductor round service cable 1100V for connection from loop /junction box to street light / security light drawn through PVC conduit with necessary clamping with necessary clamps etc complete all as specified and directed. |
| 5 | M&L for painting of RCC pole, 7.5 m approx above ground level with one coat of cement based paint over a coat of primer on plaster/ cement surfaces & one coat of white colour anti algae or fungal paint over a coat of primer on plaster/ cement surfaces (rest of part of the pole) of any description including preparation of old painted surfaces and steel bracket to be painted with two coat of aluminium paint (second coat of paint to be carried out one day later after the first coat), over a coat of red oxide primer and writing pole number complete all as specified & directed. Note:- Anti Fungal/ Algae Paint to be of Apex of Asian Paint or Weather Coat of Berger or equivalent to Dulux/ Nerolac. |
| 6 | M&L for painting of steel tubular swaged pole, 7.5 m approx above ground level incl bracket, clamp etc with two coats of sky blue enamel paint over a coat of red oxide primer upto 1.5 m from the ground level and above 1.5m from ground level and two coats of aluminium paint over a coat of red oxide primer of any description including preparation of old painted surfaces and writing pole number complete all as specified & directed. |
| 7 | M&L for painting of steel tubular swaged swan neck pole, 7.5 m approx above ground level incl bracket, clamp etc with two coats of sky blue synthetic enamel paint over a coat of red oxide primer upto 1.5 m from the ground level and one coat of aluminium paint over a coat of red oxide primer on steel surfaces on rest of part of the pole of any description including preparation of old painted surfaces and writing pole number complete all as specified & directed. |
| 8 | M&L for painting of steel tubular swaged pole, 9.1 m approx above ground level incl angle, clamp etc with two coats of sky blue synthetic enamel paint over a coat of red oxide primer (upto 1.5 m from the ground level) and two coats of aluminium paint over a coat of red oxide primer (rest part of the pole) of any description including preparation of old painted surfaces and writing pole number complete all as specified & directed. |
| 9 | M&L GI tubes 15 mm bore light grade with all fittings laid in trenches/ wall/ pole through MS flat (25X3 mm), nut, bolt & washers [ where ever reqd ] of proper sizes for protection of cables complete all as specified and directed. |
| 10 | M&L for hot dip galvanised (as per BS EN ISO 1461 1991) brackets of 40 mm dia (medium grade), 1.5 m long for fixing LED type street light luminaires, fixing it to pole through MS Clamp, nut, bolt & washers incl taking down old one complete all as specified and directed. Note: Any welding works related to bracket should be carried out at the factory premises of the manufacturers |
| 11 | Supply and fixing all in one comprising of high efficiency LEDs (180 lm/W), solar street Light with luminaire wattage 30W, High Efficiency Mono Crystalline Solar PV Module 12 V 60W, lithium Ferro phosphate battery 12.8V 24Ah with inbuilt BMS technology having autonomy of 24 hours, high efficiency LED >93%, MPPT solar charge controller and aluminium extruded body, specially designed PIR sensor to control the dimming and brightness of light leads to extend working time and 5 mtr long octagonal pole (type CPT-5030) top dia 70 mm bottom dia 130 mm sheet thickness 3 mm including base plate of size (L x B x T) 200 x 200 x 12 mm, bolt size 4 x 16 mm dia and bolt length 450 mm including suitable Excavation work and PCC work as recommended by manufacturer complete and include taking down of old unserviceable solar light of any capacity all as specified and directed including manufacturer's warranty of Min 03 years. |
| 12 | M & L for Energy saving, environmental friendly, long life, exclusive innovative die-casting aluminium IP66 flood light of capacity 50W,suitable for highlighting architectural facade and general purpose lighting complete having Lumen efficiency of LED >140 lm/W, System lumen efficiency> 110 lm/W and viewing angle of 120°, Operating temperature: -10 °C to +50 °C, Operating voltage range: 100 V - 300 V, LED Life L70 >50000 hrs Powered by Built-In Potted, isolated electronic LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Over Voltage protection, Surge Voltage Protection upto 10kV & other safety test as per IS 15885 Part-2/Sec 13 including taking down old one complete & with manufacturer's warranty of minimum 03 years. |
| 13 | M & L for Energy saving,environmental friendly, long life, exclusive innovative die-casting aluminium IP66 flood light of capacity 100W,suitable for highlighting architectural facade and general purpose lighting complete having Lumen efficiency of LED >140 lm/W, System lumen efficiency> 110 lm/W and viewing angle of 120°, Operating temperature: -10 °C to +50 °C, Operating voltage range: 100 V - 300 V, LED Life L70 >50000 hrs Powered by Built-In Potted, isolated electronic LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Over Voltage protection, Surge Voltage Protection upto 10kV & other safety test as per IS 15885 Part-2/Sec 13 including taking down old one complete & with manufacturer's warranty of minimum 03 years. |
| 14 | M & L for Energy saving,environmental friendly, long life, exclusive innovative die-casting aluminium IP66 flood light of capacity 200W,suitable for highlighting architectural facade and general purpose lighting complete having Lumen efficiency of LED >140 lm/W, System lumen efficiency> 110 lm/W and viewing angle of 120°, Operating temperature: -10 °C to +50 °C, Operating voltage range: 100 V - 300 V, LED Life L70 >50000 hrs Powered by Built-In Potted, isolated electronic LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Over Voltage protection, Surge Voltage Protection upto 10kV & other safety test as per IS 15885 Part-2/Sec 13 and repair/replacement of manufacutring warranty of minimum 3 years. |
| 15 | Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete having Lumen efficiency of LED >140 lm/W, System lumen efficiency> 110 lm/W and viewing angle of 120°, Operating temperature: -10 °C to +50 °C, Operating voltage range: 100 V - 300 V, LED Life L70 >50000 hrs Powered by Built-In Potted, isolated electronic LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Over Voltage protection, Surge Voltage Protection upto 10kV & other safety test as per IS 15885 Part-2/Sec 13 including taking down old one complete & with manufacturer's warranty of minimum 03 years. |
| 16 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete having Lumen efficiency of LED >140 lm/W, System lumen efficiency> 110 lm/W and viewing angle of 120°, Operating temperature: -10 °C to +50 °C, Operating voltage range: 100 V - 300 V, LED Life L70 >50000 hrs Powered by Built-In Potted, isolated electronic LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Over Voltage protection, Surge Voltage Protection upto 10kV & other safety test as per IS 15885 Part-2/Sec 13 including taking down old one complete & with manufacturer's warranty of minimum 03 years. |
| 17 | Supply and fixing LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete having Lumen efficiency of LED >140 lm/W, System lumen efficiency> 110 lm/W and viewing angle of 120°, Operating temperature: -10 °C to +50 °C, Operating voltage range: 100 V - 300 V, LED Life L70 >50000 hrs Powered by Built-In Potted, isolated electronic LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Over Voltage protection, Surge Voltage Protection upto 10kV & other safety test as per IS 15885 Part-2/Sec 13 including taking down old one complete & with manufacturer's warranty of minimum 03 years. |
| 18 | S & F energy saving LED spike light of IP66 using COB LED of capacity 8/9 W all as specified and directed. |
| 19 | Excavating in trenches manually not exceeding 1.5m wide and not exceeding1.5 mtr in depth/ width for laying under ground cable / foundations and getting out in soft / loose soil all as specified and directed. |
| 20 | Returning, filling in incl spreading, leveling, watering and well ramming in layers not exceeding 25cm all as specified and directed. |
| 21 | Removing of surplus excavating material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed. |
| 22 | M&L for HDPE Double wall corrugated pipe of size 63/50 mm as per IS: 16098 Part-II-2013 and ISO 21138 & BSEN 13476-1TO 3 laid in trenches/wall for protection cables complete all as specified and directed. |
| 23 | M&L for cement concrete in foundations, filling and mass concreteType C2 1:3:6, 40mm graded aggregate all as specified and directed. |
| 24 | M&L of UG cable XLPE insulated,armoured heavy duty electric cable with aluminium conductor,1100 Volts grade,cross section area incl lugs of size 25 sqmm 3.5 core complete all as directed. |
| 25 | All as per above Serial item no.25.00 here in above but size 16 sqmm 4 core complete all as directed. |
| 26 | S&L in repair of UG XLPE insulated, armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area 10 Sqmm 2 core including taking out old cable all as specified and directed. |
| 27 | M&L for boring under roads or any other specified location by reqd T&P without disturbing the top surface of the road for insertion of GI Pipe of 50 to 100 mm dia etc complete all as specified and directed. |
| 28 | M&L for tubes 50 mm bore light grade galvanized with all fittings laid in trenches/ wall/ pole through MS flat (25X3 mm), nut, bolt & washers [ where ever reqd ] of proper sizes for protection cables complete all as specified and directed. |
| 29 | S&F Double wall corrugated pipe coupler for pipe size 63/50 mm all as directed by Engr-in-Charge. |
| 30 | Supply and fix timer switch astro type (Having longitude and latitude of Indian cities in memory) 250 V single phase of Max load capacity 12 KW rating with contactor rating 65/TP and MCB rating 63/TPN fitted inside steel enclosure conforms to IS/IEC 60947-4-1 with IP54 protection and H class insulation. |
| 31 | M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. Note: The rate quoted shall inclusive of GI wire 4 mm dia with GI pipe protection 15 mm (light grade) up to 7.5 m. |
| 32 | S&F LED decorative Bollad light of 10 W, IP66 & IK08 protection against water and impact resistance with operating voltage range 140V-270 V,Lumen efficiency of of LED> 130 lm/W with manufacturer's warranty of minimum 03 years including taking down old unserviceable bollard light of any capacity all as specified and directed. |
| 33 | S&F LED post-top light of 45 W, IP65 & IK07 protection against water and impact resistance with operating voltage range 140V-270 V, Lumen efficiency of LED> 140 lm/W with manufacturer's warranty of minimum 03 years including taking down old unserviceable light of any capacity all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender