Tender For Petty Repair To Pocket 5 To 8 Of Age B/R-Ii Under Ge Roorkee
Tender Value
50 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
15 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Petty Repair To Pocket 5 To 8 Of Age B/R-Ii Under Ge Roorkee
BOQ
| Sl. No. | Item Description |
| 1 | Attending complaints of leaking / unserviceable pillar cock, Wall mixer, WHB Mixer, bib taps,two way bib taps, stop valves, 15mm - 20mm dia for making it fully functional and leak proof by carefully including taking down, replacing minor unserviceable parts such as rubber washer, leather washers, jumpers brass 15mm - 20mm size complete all as directed and specified. Note: Major parts such as Spindles CP pillar cocks, wall mixer, WHB mixer,Two way bib taps,CP bib cocks , Angle cocks replaced if any shall be measured and paid for separately under respective item. |
| 2 | Attending complaints of leaking / unserviceable , low level flushing cisterns, PVC or chinaware or concealed in wall flushing cistern for making it fully functional and leak proof by replacing the defective parts such as rubber washers,PVC levers, PVC/ CP knobs if required complete all as directed and specified. |
| 3 | Attending complaints of internal water supply pipes,fittings and bottle traps for removing of blockages etc of any description incl removing & clearing of air locks etc., by pressure pump or any other means including taking down and refixing of pipes & fittings and replacing old unserviceable pipes and fitting with new ones complete all as specified and as directed. Note: New GI pipes replaced if any shall be measured and paid under respective item of this schedule as S&F. This item includes for labour part only for removal of blockages of air lock etc. |
| 4 | Supply only Brass spindle for 15mm-20mm dia CP Bib Cocks/ CP Pillar cocks / CP Angle cocks/ mixer etc as per sample kept in GE office complete all as specified and directed. |
| 5 | Supply only Brass spindle for 15mm-20mm dia CP concealed stop cocks etc as per sample kept in GE office complete all as specified and directed. |
| 6 | Supply only GI Elbow suitable for 15mm bore pipe complete |
| 7 | Supply only GI Elbow/ Reducing Elbow suitable for 20mm bore pipe complete (Larger bore measured) |
| 8 | Supply only GI Socket suitable for 15mm bore pipe complete |
| 9 | Supply only GI Socket/ Reducing socket suitable for 20mm bore pipe complete (Larger bore measured) |
| 10 | Supply only GI Tee suitable for 15mm bore pipe complete |
| 11 | Supply only GI Tee / Reducing Tee suitable for 20mm bore pipe complete (Larger bore measured) |
| 12 | Supply only GI Union Socket suitable for 15mm bore pipe complete. |
| 13 | Supply only GI Union Socket suitable for 20mm bore pipe complete. |
| 14 | Taking down of existing Aluminum glazed shutters & refixing in the same opening after necessary repairs like tightening of cleats , repairs to hinges, fixing of neoprene rubber, governing pivots etc all as directed to obtain smooth opening /closing operation, complete all as specified and directed. |
| 15 | Supply only neoprene rubber gasket for securing glass panes of aluminum shutters all as specified & directed . |
| 16 | S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed/concealed complete to walls and ceiling or laid in floor etc complete all as specified. |
| 17 | S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed/concealed complete to walls and ceiling or laid in floor etc complete all as specified. |
| 18 | Checking and attending complaints to carpenter work in repairs to joinery (wooden/steel/aluminium mongery, pelmet box, door spring, rolling shutter, collapsible door etc required carpentary work and carrying out minor repair such as tighting to screws/nails, wire of false ceiling, easening of joinery, door spring etc complete all as specified and directed. |
| 19 | M&L for non skid ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 and including dismantling of old tiles with cement mortar bedding and removing off the premises complete all as specified and as directed. |
| 20 | M&L for non skid ceramic tiles 7-8mm thick (square/ rectangular) as in skirting / dado, cut out of ceramic tiles of size exceeding 0.11 sqm but not exceeding 0.18 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 21 | M&L for non skid ceramic tiles 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 22 | M&L for non skid ceramic tiles 8mm thick (square/ rectangular) as in skirting / dado, cut out of ceramic tiles of size exceeding 0.18 sqm but not exceeding 0.38 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 and including dismantling of old tiles with cement mortar bedding and removing off the premises complete all as specified and as directed. |
| 23 | M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointe (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 and including dismantling of old tiles with cement mortar bedding and removing off the premises complete all as specified and as directed. |
| 24 | M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles and including dismantling of old tiles with cement mortar bedding and removing off the premises complete all as specified and as directed. |
| 25 | M&L for 16 -18mm thick granite (colour as approved) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed bed or bedding layer in CM 1:4 & including dismantling of old tiles with cement mortar bedding and removing off the premises complete all as specified and as directed. |
| 26 | M&L 75 mm thick PCC 1:3:6 (40 mm graded aggregate) Type C2 as in plinth protection , PCC will be laid with 12 mm gap & the gap will be filled up with bituminous joint filler type A & including demolition complete all as specified and as directed by engineer in charge. |
| 27 | Providing, cement concrete 1:2:4 type B1 (20 mm graded aggregate ) as in roof kerbs, mud stops, rounded or chamfered on edges, leveling course in floor etc all as specified and as directed by engineer in charge. |
| 28 | M&L for rendering 15 mm thick in CM 1:6 over brick wall, concrete surfaces, finished even and smooth (without using extra cement) incl. taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris all as specified and as directed. |
| 29 | M&L for 15 mm thick rendering on brick wall surfaces in CM 1:4 finished fair and even with WPC treatment all as specified and as directed.(Note:- WPC shall be measured separtly) incl. taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris |
| 30 | M&L for 5 mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement and incl. taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris all as specified and as directed. |
| 31 | S&F chicken wire mesh with tack screws of galvanised mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperature 1.18mm all as specified and directed. |
| 32 | Supply only integral water proofing liquid ISI marked Make: Pidiproof LW |
| 33 | M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan, exc. 6m mean radius built, in cement mortar 1:6 as in manholes, septic tanks, soakage pits, drain etc in any position incl demolition of brick work complete all as specified and directed. |
| 34 | \\"Material and labour for brickwork with subclass 'B' bricks, straight or curved on plan (exceeding 6m mean radius), using serviceable old bricks obtained from demolition, built in cement mortar 1:6, complete all as specified and directed.\\" |
| 35 | Preparing new plastered surfaces and M&L for applying chalk whitening/ concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of Distemper oil Emulsion on new plastered surfaces with roller complete all as specified and as directed. |
| 36 | Preparing new plastered surfaces and M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of cement base paint on new plastered surfaces with automatic airless spray machine complete all as specified and as directed. |
| 37 | Preparation of new plastered surfaces of ceiling etc. & applying three coats of lime white wash on ceiling with roller complete all as specified and as directed. |
| 38 | S&F sheet glass ordinary quality 3.0mm thick and glazing with oil putty or wooden beads in square not exceeding 0.5 sqm in each pane including hacking out old broken glass complete all as specified and as directed. |
| 39 | S&F sheet glass ordinary quality 4.0mm thick and glazing with oil putty or wooden beads in square not exceeding 0.5 sqm in each pane hacking out old broken glass complete all as specified and as directed. |
| 40 | S&F sheet glass ordinary quality 4.8mm thick and glazing with alluminium beads in square but exceeding 0.5 sqm in each pane hacking out old broken glass complete all as specified and as directed. |
| 41 | S&F sheet glass 4mm thick frosted glass, pin headed type, in square n exc 0.5sqm each pane glazing with oil putty hacking out old broken glass complete all as specified and as directed. |
| 42 | Re-securing glass of any description, thickness, size not exc 0.50 Sqm each pane in existing metal frames glazed with oil putty, incl removal of old putty, replacement of unserviceable glazing pins/ spring clips, securing glass with glazing pins and oil putty complete all as specified and as directed. |
| 43 | S&F wire netting of stainless steel, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, fixed in repairs i.e. Incl removal of old unserviceable wire cloth complete all as specified and as directed. |
| 44 | Resecuring/ re-fixing of wooden/ PVC shutters of any description and size not exceeding 2.00 Sqm each including taking down (if reqd), easing and adjusting and refixing where ever required and fixing new steel screws complete all as directed and as specified. |
| 45 | S&F for 18mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws, solvent cement/ adhesive and incl. dismantling complete all as specified. |
| 46 | S&F for 12mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws, solvent cement/ adhesive and incl. dismantling complete all as specified. |
| 47 | S&F for continous (piano) hinges , mild steel, bright finished or electrogalvanised, width of flap 30mm complete all as specified and directed. |
| 48 | S&F for mild steel Easy- slide auto Hydraulic hinges (CH-S-8), package contains 2 units of hinges with 4 Nos screw for kitchen cabinet, Cup board, wardrobe etc complete all as specified and directed. |
| 49 | S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. |
| 50 | S&F Brass 2 Levers Cupboard locks grade 1, Size 50mm complete all as specified and directed. |
| 51 | S&F for 100 mm Brass handles, cast type, polished bright and fixed complete all as specified and directed. |
| 52 | Taking down Chowkats or frames not exceeding 1.5 Sq.m each with shutters (Without taking off shutters from the frames) complete all as specified and directed. |
| 53 | Taking down Chowkats or frames exceeding 1.5 Sq.m but not exceeding 4 Sq.m each with shutters (Without taking off shutters from the frame) complete all as specified and directed. |
| 54 | Taking down Shutters of any description n exc 1 sq. m each complete all as specified and as directed. |
| 55 | Taking down shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and as directed. |
| 56 | S&F pressed steel frame 105mmx60mm for doors with one or more rebates including necessary fixing lungs, hinges, lock strike plate,etc complete all as specified and directed |
| 57 | S&F pressed steel frame 125mmx60mm for doors with one or more rebates including necessary fixing lungs and hinges, lock strike plate,etc complete all as specified and directed |
| 58 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed all as specified and as directed |
| 59 | S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 60 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 61 | S&F for factory made 35 mm 2nd class Hard Wood, plain framed panelled shutters ( two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board medium density, wood particle board with commercial veneering on both face s. The size of rail & site as per IS 1003 ( Part-I) kiln seasoned and chemically pressured treated complete all as specified and directed. |
| 62 | S&F for 35 mm thick glazed and skeleton shutters of 2nd class Hard Wood, open rebated and prepare to reveive glass, guage etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with for securing glass etc, size of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) complete all as specified and directed. |
| 63 | S & F Factory Made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed. |
| 64 | S & F Factory Made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 65 | S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes , framed guard bars, barred iron doors , ladders, framed balusters, railings and similar conforming to Fe-290Gde E-165 complete all as specified and directed. |
| 66 | S&F for 4mm thick plain, ordinary quality sheet glass and glazing with rubber packing in aluminium frame of door and window in any size in each pane complete all as specified and directed.(Note:- Rate for fixing shall glass deemed to include with Sr item No-32 ) |
| 67 | S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed . |
| 68 | Supply only stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed .(Note:- Rate for fixing wirecloth deemed to include with Sr item No-30 ) |
| 69 | S&F 150 mm long aluminium anodised , barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 70 | S&F 100 mm long aluminium anodised , barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 71 | S&F aluminum handles extruded type, anodized of 150 mm size complete all as specified and directed. |
| 72 | S&F aluminum handles extruded type, anodized of 100 mm size complete all as specified and directed. |
| 73 | \\"Supply and fix mild steel butt hinges, 100mm long, medium weight, made from cold rolled mild steel, complete all as specified and directed.\\" |
| 74 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 75 | S&F in repair butt hinges 75 mm long medium weight, cold rolled mild steel complete all as specified and directed. |
| 76 | S&F in repair butt hinges 100mm long medium weight, cold rolled mild steel complete all as specified and directed. |
| 77 | S&F, mild steel sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts plate and nuts, four on bolts and two on staple plate in wooden shutters and welded /diveresed in steel shutter 300 mm long complete all as specified and directed. |
| 78 | S&F in repairs extruded aluminum alloy handles 100 mm size fabricated type anodized all as specified complete all as specified and as directed. |
| 79 | S&F in repairs 100 mm long aluminum anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 80 | S & F in repairs 300 mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 81 | \\"Supply and fix mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete, complete all as specified and directed.\\" |
| 82 | S&F in repair mild steel 300 mm helical door spring hinges with steel wire spring, stove enamelled black complete all as specified and as directed |
| 83 | S & F in repair Curtain rail stainless steel decorative type 20-25 mm dia including fixing bracket and end knobs complete all as specified . |
| 84 | S & F for door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed |
| 85 | S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 86 | S & F powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators, partitions with one or more rebates including jointing cleat for fixing etc. |
| 87 | S & F powder coated aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing, handles 2 Nos in each door, hinges, 200mm long aluminium tower bolts, anodised aluminium snap beading screws etc complete. |
| 88 | S & F powder coated aluminium windows, ventillators shutters, fixed type / slidding type, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing, anodised aluminium snap beading screws, locking latches etc complete. |
| 89 | S & F powder coated aluminium windows, ventillators shutters, side hung type, without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 No). hingestype B-21 100mm long (2 no.) suitable handle (1 no.) locking latches etc complete all as specified and directed. |
| 90 | M & L for prepration new or previously untreated surfaces of wood or wood based surfaces and applying two coat of synthetic enamel paint over a prime coat of pink primer on surfaces of any desription, not otherwise described, over 10 cm width or girth complete all as specified and as directed. |
| 91 | M & L for applying two coat of synthetic enamel paint on new or previously un-treated steel or iron surfaces of any decription, over 10 cm in width or grith, not othewise described including preparation of surfaces and over a coat of red oxide primer complete all as specified and as directed. |
| 92 | M&L 1:3:6 type C2 Cement concrete as in back filling in chowkhat and mass concrete complete all as specified and as directed. |
| 93 | Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and as directed. |
| 94 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified. |
| 95 | S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 96 | ditto but fixed in wall 110 mm |
| 97 | S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed . |
| 98 | ditto but fixed in wall 75 mm |
| 99 | S& F PVC SWR bends any radius 75mm dia with access door or without access door |
| 100 | S& F PVC SWR bends any radius 110 mm dia with access door or without access door |
| 101 | S& F PVC (SWR) junction single, (Single T) equal or unequal 75mm dia with access door or without access door |
| 102 | S& F PVC (SWR) junction single, (Single T) equal or unequal 110 mm dia with access door or without access door |
| 103 | S&F PVC SWR vent cowl 110 mmn dia |
| 104 | S&F for 100mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified. |
| 105 | S&F for 75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified. |
| 106 | S&F 75 mm PVC (SWR) couplers |
| 107 | S&F 110 mm PVC (SWR) couplers |
| 108 | S&F 110 mm PVC (SWR) junction double, (double T), equal or unequal |
| 109 | S&F 110mm PVC pipe 'P' or 'S' trap, complete all as specified. |
| 110 | Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified. |
| 111 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed/concealed complete to walls and ceiling or laid in floor incl taking down, cleaning or removal from site etc complete all as specified. |
| 112 | Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed/concealed complete to walls and ceiling or laid in floor incl taking down, cleaning or removal from site etc complete all as specified. |
| 113 | S&F in repair W.C vitreous china, squatting pan orissa patern size 580x440mm white with intergral foot rest & P - or S trap,flush pipie complete excluding cistern complete all as specified. |
| 114 | S&F in repair W.C vitreous china, (pedestal patern ) white (excluding flushing cistern and flush pipes ) including seat cover fixing bolt & P - or S trap,flush pipie complete all as specified.and directed |
| 115 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completein all respect as specified. |
| 116 | S&F in repair PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and connections to pipes of capacity 10 lts complete all as spepciified and directed. |
| 117 | S&F in repair stop cock/angle valve 15 mm nominal bore brass chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directeed |
| 118 | S&F in repair Brass chromium plated shower rose 125mm dial size with15 mm shower arm complete all as specified and directed |
| 119 | M&L 75 mm dia PVC (SWR) floor trap with grating including jointing with solvent cement joint complete all as specified and directed. |
| 120 | S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 121 | S&F in repair CP fancy type bib tap cast copper alloy with crutch or butter fly handle (Long Body), screwed down screwed for iron pipe 15 mm bore of tubing complete all as specified and directed |
| 122 | S&F in repair Vitreous China wash basin oval type white size 580 x 450mm excluding taps waste, chain and plug, but fixed waste pipe complete all as specified and directed. |
| 123 | S&F for 32mm PVC waste pipe for flushing cistern, whb,sink etc complete all as specified and directed. |
| 124 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 125 | S&F 25 mm bore Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed with all necessary fitting and fixer reducer elbow etc complete all as specified and directed |
| 126 | S&F in repair 15 mm bore cast copper alloy stop valve , fancy type chromimum plated with long shank and cup (concealed type ) screwed down , high pressure, with crutch or butter fly screwed both ends for iron pipr or union and fixed complete all as specified and directed. |
| 127 | S&F in repair 15 mm Fancy type pillar tap cast copper alloy with capstan head chromumum plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe fixed complete all as specified and directed |
| 128 | S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe vitreous china urinal bowl type white fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and including 60 mm long brass screws urinal spreader of PTMT any color fixing with 15 mm dia pipe PVC pointing aroung urinal back in cement complete all as specified and directed |
| 129 | Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) all as specified and as directed. |
| 130 | S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets all as specified and as directed by engineer in charge. |
| 131 | S&F in repair Stainless steel cromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 132 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and as directed. |
| 133 | S&F in repair vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified. |
| 134 | Disconnecting existing PVC tank exc 250 Ltrs and not exc500 Ltrs setting aside (or lowering if required) for repairs, cleaning (Cleaning and removing all scale and dirt, etc; from tanks and from mouth of circulating pipe etc;) and hoisting and re-fixing in position complete all as specified and directed. |
| 135 | Disconnecting existing PVC tank exc 500 Ltrs and not exc1000 Ltrs setting aside (or lowering if required) for repairs, cleaning (Cleaning and removing all scale and dirt, etc; from tanks and from mouth of circulating pipe etc;) and hoisting and re-fixing in position complete all as specified and directed. |
| 136 | S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and incl. taking down all as specified in SSR Part-I complete all as specified. |
| 137 | S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and incl. taking down all as specified in SSR Part-I complete all as specified. |
| 138 | S & F PVC cabinet with shelve 450x600mm including mirror fixed to wall with brass cleat with shutter complete all as specified and directed. |
| 139 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 140 | S&F in reapir 15 mm bore brass CP wall mixer for mixing hot & cold water with shower controlled (3 in 1 wall mixer) screwed down for iron pipe and fixed complete all as specified and directed |
| 141 | S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified. |
| 142 | S&F in repair CP greating doom 100-125mm dia complete all as specified. |
| 143 | S&F 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (minimum weight for 25mm ball valves-455gms) fixed in repairs i.e., incl taking down and removal of old unserviceable float valves complete all as specified and as directed. |
| 144 | S&F in repair Origin LED Touch Sensor circular Glass Wall mounted light mirror for bathroom (White, 24 inch) of selected quality to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 145 | S&F PVC Door Guard Gap Filler for Door Bottom Seal Strip Sound Proof Reduce, Insects Protector, dust proof complete all as specified and as directed by engineer in charge. Note for item no. 1,2,3,14 & 18(i) The contractor or his represantative will report in complaint cell to receive the complaints in the morning by 0900hrs with necessary daily stores are required to attend day to day complaints.(ii) The complaints should be attended/completed within 24hours after receiving the complaint slip failing which penalty of Rs. 500/- (Two hundred only) will be recovered for each complaint per day from the contractor payment.(iii) The cost of masson, plumber & carpenter should be deemed to be included in the item rates quoted by the contractor nothing will be paid extra for hiring the skilled labour.(iv) Feedback :- Complaint Slip shall be provided by the Contractor. Complaint slip will be having a feedback system from user which will be obtained for each complaint and will be compiled daily and submitted by contractors to JE/Engr-in-Charge. The cost of complaint slip should be deemed to be included in the item rates quoted by the contractor nothing will be paid extra for Complaint Slip.(viii) T&P :-(a) The contractor is responsible to provide all T& P to all the manpower deployed, items such as Drill Machines, cutters, welding machines, scaffoldings etc as and when required at site.(b) Any other misc works/services connected with user facilitation as per direction of Engr-in-Charge.(c) The responsibility of taking the tradesmen to complaint site will be of contractor. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender