Tender For Repair To Joinery,Kitchen Cabinets, Door, Windows And Related Wks In Pocket 5 To 8 Age B/R-Ii Of Ge Roorkee
Tender Value
50 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
19 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery,Kitchen Cabinets, Door, Windows And Related Wks In Pocket 5 To 8 Age B/R-Ii Of Ge Roorkee
BOQ
| Sl. No. | Item Description |
| 1 | Hacking out old broken glass from metal frames incl punching or drilling out old glazing pins or spring clips and providing and fixing new ones where ever reqd complete all as specified and as directed. |
| 2 | S&F sheet glass ordinary quality 3.0mm thick and glazing with oil putty or wooden beads in square not exceeding 0.5 sqm in each pane complete all as specified and as directed. |
| 3 | S&F sheet glass ordinary quality 4.0mm thick and glazing with oil putty or wooden beads in square not exceeding 0.5 sqm in each pane complete all as specified and as directed. |
| 4 | S&F sheet glass ordinary quality 4.8mm thick and glazing with alluminium beads in square but exceeding 0.5 sqm in each pane complete all as specified and as directed. |
| 5 | S&F sheet glass 4mm thick frosted glass, pin headed type, in square n exc 0.5sqm each pane glazing with oil putty complete all as specified and as directed. |
| 6 | Re-securing glass of any description, thickness, size not exc 0.50 Sqm each pane in existing metal frames glazed with oil putty, incl removal of old putty, replacement of unserviceable glazing pins/ spring clips, securing glass with glazing pins and oil putty complete all as specified and as directed. |
| 7 | S&F wire netting of stainless steel, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, fixed complete all as specified and as directed. |
| 8 | S&F wire netting of stainless steel, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, fixed in repairs i.e. Incl removal of old unserviceable wire cloth complete all as specified and as directed. |
| 9 | Resecuring/ re-fixing of wooden/ PVC shutters of any description and size not exceeding 2.00 Sqm each including taking down (if reqd), easing and adjusting and refixing where ever required and fixing new steel screws complete all as directed and as specified. |
| 10 | Dismantling boarding, any description, fixed in any position with nails (including Cupboard shutter/Shelve upto 25mm thick) complete |
| 11 | S&F for 18mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws, solvent cement/ adhesive complete all as specified. |
| 12 | S&F for continous (piano) hinges , mild steel, bright finished or electrogalvanised, width of flap 30mm complete all as specified and directed. |
| 13 | S&F for mild steel Easy- slide auto Hydraulic hinges (CH-S-8), package contains 2 units of hinges with 4 Nos screw for kitchen cabinet, Cup board, wardrobe etc complete all as specified and directed. |
| 14 | S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. |
| 15 | S&F Brass 2 Levers Cupboard locks grade 1, Size 50mm complete all as specified and directed. |
| 16 | S&F for 100 mm Brass handles, cast type, polished bright and fixed complete all as specified and directed. |
| 17 | Taking down Chowkats or frames not exceeding 1.5 Sq.m each with shutters (Without taking off shutters from the frames) complete all as specified and directed. |
| 18 | Taking down Chowkats or frames exceeding 1.5 Sq.m but not exceeding 4 Sq.m each with shutters (Without taking off shutters from the frame) complete all as specified and directed. |
| 19 | Taking down Shutters of any description n exc 1 sq. m each complete all as specified and as directed. |
| 20 | Taking down shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and as directed. |
| 21 | M&L for taking down & refixing of shutters in same opening of any description n exc 1 sq. m each after necessary repair like rescuring easing planing, rescrewing of styles, top, bottom or lock rail etc & relacing of butt hinges complete all as specified and as directed. |
| 22 | M&L for taking down & refixing of shutters in same opening of any description exc 1 sqm but n.exc 2 sqm each after necessary repair like rescuring easing planing, rescrewing of styles, top, bottom or lock rail etc & relacing of butt hinges complete all as specified and as directed. |
| 23 | S&F pressed steel frame 105mmx60mm for doors with one or more rebates including necessary fixing lungs, hinges, lock strike plate,etc complete all as specified and directed |
| 24 | S&F pressed steel frame 125mmx60mm for doors with one or more rebates including necessary fixing lungs and hinges, lock strike plate,etc complete all as specified and directed |
| 25 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed all as specified and as directed |
| 26 | S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 27 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 28 | S&F for factory made 35 mm 2nd class Hard Wood, plain framed panelled shutters ( two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board medium density, wood particle board with commercial veneering on both face s. The size of rail & site as per IS 1003 ( Part-I) kiln seasoned and chemically pressured treated complete all as specified and directed. |
| 29 | S&F for 35 mm thick glazed and skeleton shutters of 2nd class Hard Wood, open rebated and prepare to reveive glass, guage etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with mitread beads for securing glass etc, size of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) complete all as specified and directed. |
| 30 | S & F Factory Made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed. |
| 31 | S & F Factory Made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 32 | S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes , framed guard bars, barred iron doors , ladders, framed balusters, railings and similar conforming to Fe-290Gde E-165 complete all as specified and directed. |
| 33 | S&F for 4mm thick plain, ordinary quality sheet glass and glazing with rubber packing in aluminium frame of door and window in any size in each pane complete all as specified and directed.(Note:- Rate for fixing shall glass deemed to include with Sr item No-32 ) |
| 34 | S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed . |
| 35 | Supply only stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed .(Note:- Rate for fixing wirecloth deemed to include with Sr item No-30 ) |
| 36 | S&F 150 mm long aluminium anodised , barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 37 | S&F 100 mm long aluminium anodised , barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 38 | S&F aluminum handles extruded type, anodized of 150 mm size complete all as specified and directed. |
| 39 | S&F aluminum handles extruded type, anodized of 100 mm size complete all as specified and directed. |
| 40 | \\"Supply and fix mild steel butt hinges, 100mm long, medium weight, made from cold rolled mild steel, complete all as specified and directed.\\" |
| 41 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 42 | S&F, mild steel sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts plate and nuts, four on bolts and two on staple plate in wooden shutters and welded /diveresed in steel shutter 300 mm long complete all as specified and directed. |
| 43 | S&F in repairs extruded aluminum alloy handles 100 mm size fabricated type anodized all as specified complete all as specified and as directed. |
| 44 | S&F in repairs 100 mm long aluminum anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 45 | S & F in repairs 300 mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 46 | \\"Supply and fix mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete, complete all as specified and directed.\\" |
| 47 | S&F in repair mild steel 150 mm helical door spring hinges with steel wire spring, stove enamelled black complete all as specified and as directed |
| 48 | S & F in repair Curtain rail stainless steel decorative type 20-25 mm dia including fixing bracket and end knobs complete all as specified . |
| 49 | S & F for door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed |
| 50 | S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 51 | S & F powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators, partitions with one or more rebates including jointing cleat for fixing etc. |
| 52 | S & F powder coated aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing, handles 2 Nos in each door, hinges, 200mm long aluminium tower bolts, anodised aluminium snap beading screws etc complete. |
| 53 | S & F powder coated aluminium windows, ventillators shutters, fixed type / slidding type, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing, anodised aluminium snap beading screws, locking latches etc complete. |
| 54 | S & F powder coated aluminium windows, ventillators shutters, side hung type, without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 No). hingestype B-21 100mm long (2 no.) suitable handle (1 no.) locking latches etc complete all as specified and directed. |
| 55 | M & L for prepration new or previously untreated surfaces of wood or wood based surfaces and applying two coat of synthetic enamel paint over a prime coat of pink primer on surfaces of any desription, not otherwise described, over 10 cm width or girth complete all as specified and as directed. |
| 56 | M & L for applying two coat of synthetic enamel paint on new or previously un-treated steel or iron surfaces of any decription, over 10 cm in width or grith, not othewise described including preparation of surfaces and over a coat of red oxide primer complete all as specified and as directed. |
| 57 | M&L for 1:3:6 type C2 Cement concrete as in back filling in chowkhat and mass concrete complete all as specified and as directed. |
| 58 | Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and as directed. |
| 59 | Checking and attending complaints to carpenter work in repairs to joinery (wooden/steel/aluminium mongery, pelmet box, door spring, rolling shutter, collapsible door etc required carpentary work and carrying out minor repair such as tighting to screws/nails, wire of false ceiling, easening of joinery, door spring etc complete all as specified and directed. |
| 60 | S&F PVC Door Guard Gap Filler for Door Bottom Seal Strip Sound Proof Reduce, Insects Protector, dust proof complete all as specified and as directed by engineer in charge. |
| 61 | Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed |
| 62 | M&L for rendering 15 mm thick for internal surface in CM 1:6 over brick wall, concrete surfaces, finished even and smooth (without using extra cement) all as specified and as directed. |
| 63 | M&L for 15 mm thick rendering on brick wall for external surfaces in CM 1:4 finished fair and even with WPC treatment all as specified and as directed.(Note:- WPC shall be measured separtly) |
| 64 | M&L for 5 mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement all as specified and as directed. |
| 65 | S&F chicken wire mesh with tack screws of galvanised mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperature 1.18mm all as specified and directed. |
| 66 | Supply only integral water proofing liquid ISI marked Make: Pidiproof LW |
| 67 | Demolition of brickwork or stone/ boulder masonry, built in cement or lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 68 | M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan, exc. 6m mean radius built, in cement mortar 1:6 as in manholes, septic tanks, soakage pits, drain etc in any position complete all as specified and directed. |
| 69 | \\"Material and labour for brickwork with subclass 'B' bricks, straight or curved on plan (exceeding 6m mean radius), using serviceable old bricks obtained from demolition, built in cement mortar 1:6, complete all as specified and directed.\\" |
| 70 | Preparing new plastered surfaces and M&L for applying chalk whitening/ concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of Distemper oil Emulsion on new plastered surfaces with roller complete all as specified and as directed. |
| 71 | Preparing new plastered surfaces and M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of cement base paint on new plastered surfaces with automatic airless spray machine complete all as specified and as directed. |
| 72 | Preparation of new plastered surfaces of ceiling etc. & applying three coats of lime white wash on ceiling with roller complete all as specified and as directed. |
| 73 | S&F in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 74 | S&F in repair Solid PVC Wall lining consisting of 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and as directed. |
| 75 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,m water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). |
| 76 | All as per item |No 75 here in before but of Frame size 50 x 125 mm |
| 77 | S&F for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutterand fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges shall be paid separately) |
| 78 | Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site all as specified and as directed. |
| 79 | Dismantling glazed tiles/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) complete all as specifide. |
| 80 | M&L for non skid ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 81 | M&L for non skid ceramic tiles 7-8mm thick (square/ rectangular) as in skirting / dado, cut out of ceramic tiles of size exceeding 0.11 sqm but not exceeding 0.18 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 82 | M&L for non skid ceramic tiles 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 83 | M&L for non skid ceramic tiles 8mm thick (square/ rectangular) as in skirting / dado, cut out of ceramic tiles of size exceeding 0.18 sqm but not exceeding 0.38 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 84 | M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointe (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 85 | M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed. |
| 86 | M&L for for 16 -18mm thick granite (colour as approved) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed. |
| 87 | M&L 75 mm thick PCC 1:3:6 (40 mm graded aggregate) Type C2 as in plinth protection , PCC will be laid with 12 mm gap & the gap will be filled up with bituminous joint filler type A complete all as specified and as directed by engineer in charge. |
| 88 | M&L for Providing, cement concrete 1:2:4 type B1 (20 mm graded aggregate ) as in roof kerbs, mud stops, rounded or chamfered on edges, leveling course in floor etc all as specified and as directed by engineer in charge. |
| 89 | S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge |
| 90 | S&F stainless steel (grade-304) grills made of hollow tubes section including welding, grinding, buffing polishing and making curvatures wherever required and fitting the same with necessary holdfasts/ SS dash fastners with nut & bolts of required size, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender