Tender For Petty Repair To Pocket 1 To 4 Of Age B/R-I Under Ge Roorkee
Tender Value
50 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
18 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Petty Repair To Pocket 1 To 4 Of Age B/R-I Under Ge Roorkee
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repairs CPVC water tubing of 20 mm bore (nominal), SDR 11, pressure class 10 kg/cm², conforming to ASTM D 2846, suitable for working temperature up to 93°C, including all fittings such as tees, elbows, sockets, bends, unions, reducers, short pieces etc., complete; jointed with approved solvent cement, fixed to walls/ceilings or laid in floors, including necessary clamps/supports at required spacing, and making good disturbed surfaces to match existing finishes, complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | S&F in repairs CPVC water tubing of 25 mm bore (nominal), SDR 11, pressure class 10 kg/cm², conforming to ASTM D 2846, suitable for working temperature up to 93°C, including all fittings such as tees, elbows, sockets, bends, unions, reducers, short pieces etc., complete; jointed with approved solvent cement, fixed to walls/ceilings or laid in floors, including necessary clamps/supports at required spacing, and making good disturbed surfaces to match existing finishes, complete all as specified and as directed by the Engineer-in-Charge |
| 3 | S & F in repair SS butt hinges of size 100 mm all as specified and directed by Engr in Charge |
| 4 | S & F in repair SS aluminium tower bolt of size 150 mm all as specified and directed by Engr in Charge |
| 5 | S & F in repair SS handle of 200 mm all as specified and directed by Engr in Charge |
| 6 | S & F in repairs of 15 mm bore size PVC, PTMT bib tap complete all as specified and directed. |
| 7 | S & F in repairs of 15 mm bore size PVC, Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms) complete all as specified and directed. |
| 8 | S & F in repairs of 15 mm bore size PVC, Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms)complete all as specified and directed. |
| 9 | S & F in repairs brass chromium plated bib tap (short body) for iron pipe of 15 mm bore with crutch or butterfly handle, screwed down high pressure complete all as specified and directed. |
| 10 | S & F in repairs brass chromium plated bib tap (long body) for iron pipe of 15 mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed. ( Model :SQT-512KN Make : ESSCO (Jaquar) Model No 7708 of Prayag Model No PLU-386 Sparsh pearl, Model No F2002152 of CERA). |
| 11 | S & F in repairs 15 mm dia brass Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed. |
| 12 | S & F in repairs 2nd class hard wood plain fillets square or rectangular or tri angular in section clean sawn planed on both sides secured with nails or beads in section exc 13sqcm and n-exc 25 sqcm including two coats of synthetic enamel paint over a coat of primer.Complete all as specified and directed |
| 13 | S & F in repairs brass CP mixer (arial single lever basin mixer) for mixing hot & cold water of 15mm bore screwed down for iron pipe complete all as specified and directed. |
| 14 | S & F in repairs brass CP mixer ( Sink mixer) for mixing hot & cold water of 15mm bore screwed down for iron pipe complete all as specified and directed. |
| 15 | S & F in repairs ball valve of PTMT with Polyethene float for 20 mm bore pipe complete all as specified and directed. |
| 16 | S & F in repairs ball valve of PTMT with Polyethene float for 15mm bore pipe complete all as specified and directed. |
| 17 | S & F in repairs stop/angle cock ISI marked fancy type, chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed. |
| 18 | S & F in repairs chromium plated brass stop cock fancy type (Concealed Stop Cock incl exposed Part of Concealed Stop Cock) screwed both ends high pressure for 15 mm bore size iron pipe or ferrule complete all as specified and directed (Model :MQT-514KN Make : ESSCO (Jaquar) Model No 7718 of Prayag , Model No PLU-390 Sparsh pearl,Model No F2002361 of CERA). |
| 19 | S & F in repairs CP brass shower rose (single lever over head shower incl shower arm casted 190 mm long flat shape with flange) 125 mm size suitable for 15 mm bore pipe complete all as specified and directed |
| 20 | S & F in repair 15 mm bore, fancy type, health faucet with SS hose complete all as specified and as directed by Engr-in-Charge. |
| 21 | S&F in repairs Rimless One Piece EWC size 680 x 365 x 705 mm including Duroplast soft close seat cover S Trap/Ptrap complete all as specified and directed. |
| 22 | S&F in repairs One Piece EWC flushing kit square/circle complete all as specified and directed. |
| 23 | S & F in repair for wall mixer with provision for overhead shower complete with 115 mm long bend pipe for connection to overhead shower (with bush and piston Divertor fittings) with aerator with telephonic shower and fixing telephonic shower with wall mounted crutch (Holder/bracket) complete all as specified and as directed by Engr-in-Charge. |
| 24 | S & F in repairs PVC connection 450 mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed. |
| 25 | S & F in repairs PVC flush pipe of 32mm dia pipe for connecting low level flushing cistern incl jointing to WC complete all as specified and directed. |
| 26 | S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed |
| 27 | S & F in repairs plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and directed. |
| 28 | S & F in repairs viterous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap (Make : Parryware/Hindware) and making good the disturbed surface to match with the existing complete all as specified and as directed. |
| 29 | S & F in repair vitreous china squatting pan (Orissa pattern) long pan including connection to trap,and to flushing pipe , anti-syphonage pipe etc incl making good to floor fixed in repair size 580x440mm white with intergral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush) complete all as specified and directed. |
| 30 | S&F in repair vitreous china urinal, half stall type white (excl of flushing cistern and flush pipe & waste pipe) fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and incl 60mm long brass screw, urinal spreader of PTMT any colour fixing with 15mm dia pipe, pointing around urinal back in cement fixed as in complete all as specified and directed. |
| 31 | S&F in Repairs Urinal Glass partition of size 450x 900 mm complete all as specified and directed |
| 32 | S & F in repairs vitreous china wash hand basin, white flat back size 550 x 400 mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified and directed. |
| 33 | M & L for in repair GI tubing ISI marked medium grade 15 mm bore with all fittings and fixed complete to walls and ceilling or laid under floor including connection etc, complete all as specified incl taking down complete all as specified and directed. |
| 34 | M & L for in repair GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceilling or laid under floor including connection etc, complete all as specified incl taking down complete all as specified and directed. |
| 35 | S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips and providing new glazing pins / spring clips complete all as specified and directed. |
| 36 | S & F of 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips and providing new glazing pins / spring clips complete all as specified and directed.. |
| 37 | S & F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tied tacks or galvanised wire stapple etc to wooden/steel doors/windows including removal and new welding complete all as specified and directed. |
| 38 | S & F in repairs towel rail 600 mm long 20 mm dia brass chromium plated fixed to wall with CP steel screws etc, complete all as specified and directed. |
| 39 | S & F 250 mm MS sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate complete all as specified and directed. |
| 40 | S & F mild steel 100 mm size of butt hinges, medium weight cold rolled complete for door etc with welding to steel chowkhats at any floor up to four storied bldgs and making it functional complete all as specified and directed. |
| 41 | S & F Mild steel barel tower bolts, stove enamelled black with bright bolts and fixed 150mm long bolts ,fixed in repair complete all as specified and directed. |
| 42 | S & F MS pressed handles oval type stove enamelled black, 150 mm size as in repair complete all as specified and directed. |
| 43 | Runing welding in repairs thickness of metal to be welded n, exc 2.5Cm Exc. 6mm but Exc. 6mm but n exc 9mm complete all as specified and directed |
| 44 | S & F in repairs 125 mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 45 | S & F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with of flap 30mm complete all as specified and directed . |
| 46 | S & F in repairs looking mirror 600 x 450 x 5 mm thick with aluminium channel frame, selected quality mounted on 6 mm thick commercial ply wood back and fixed with chromium plated brass screwes and cup washers complete all as specified and directed. |
| 47 | S&F in repairs looking mirror 600x450x5mm thick of rectangular shape float glass, silvered on back, fixed to wall with stainless steel clamps/holders including drilling of holes in mirror and making good gistrubed surface complete all as specified and directed. |
| 48 | S&F/ Repairs, PVC cabinate looking mirror 300x600mm all as specified and as directed. |
| 49 | S&F in repairs urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed. |
| 50 | S & F in repairs Door closer hydraulically regulated,Aluminium (Die cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete al as specified and directed. |
| 51 | S & F in repairs 300 mm mild steel ordinary rat tail rod pattern springs incl roller and roller plate incl fixing to steel frame or to wooden frame complete all as specified and directed. |
| 52 | S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 53 | Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed . |
| 54 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed . |
| 55 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) n,exc 1.5 Sqm each complete all as specified and directed . |
| 56 | S & F 2 nd class hard wood plain solid, straight chowkhat and frame rebated on the solid rounded or chamfered put together with glue pinned at point complete all as specified and directed . |
| 57 | S & F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides including fixing of rubber door cills, complete as directed. |
| 58 | Providing and fixing 30-35 mm thick Factory Made Wire Mesh Solid WPC Door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles and 20mm x 40mm for top, lock & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacturer. 20mm x 40mm M.S. square tubes shall be covered with 6mm thick heat moulded \\"Rajshri\\" WPC Prelaminated 'C' channel of size 30mm thickness, 140mm width out of which 125 mm shall be flat and 15mm shall be bent in 90° angle on either side forming stiles & 6mm thick 165mm wide WPC sheet out of which 150mm shall be flat and 15mm shall be bent in 90° on the inner side to from top and bottom rail and 180mm wide WPC sheet out of which 150mm shall be flat and 15mm shall be bent in 90° on both side to from lock rail. 12mm (6mm x 2) thick, 20mm wide cross WPC sheet as gap insert for top rail & bottom rail. Panel will be of Stainless Steel. wire mesh of 24 gauge to be fitted in by 'C' channel of size 32mm x10mm on the either side in the stiles. The inner side 'C' channel is fixed by 20mm x 40mm M.S. tube on both sides with screws. The wire mesh in top, bottom & lock rail is sealed with 20mm x 40mm incomplete tube with Stainless Steel. Wire mesh. 12mm (6mm x 2) thick PVC strip of 20mm width is to be stuck & nails on both side of Stainless Wire mesh gauge interior at the top, bottom & lock rail. 10mmx20mm stainless steel pipe grill fix with M S Frame for support wire mesh as per selected design An additional 6mm thick WPC strip of 22mm width is to be stuck on the interior side of the 'C' Channel using WPC solvent cement adhesive etc. Complete as per direction of the site engineer. |
| 59 | S & F 35 mm thick 2nd class HW glazed skeleton shutter divided into square with plain chamfered or rounded with sash bars open rebated and prepared to receive glass/gauge etc. with plain chamfered rounded fitted with cut and mitred beads size of members of window, ventilator shutters, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (a) and fitted to chowkhat complete all as specified and directed . |
| 60 | M & L for preparation of newly surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 61 | S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed . |
| 62 | S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 63 | S & F solid PVC door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed. |
| 64 | S&F PTMT butt hinges 100 mm complete all as specified and directed by engr in charge |
| 65 | S&F PTMT Tower Bolt 200 mm complete all as specified and directed by engr in charge |
| 66 | S&F PTMT door handles 125 mm complete all as specified and directed by engr in charge |
| 67 | S&F vitrified ceramic tiles 8 to 10mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 68 | S&F vitrified ceramic tiles 8 to 10mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in as in vertical surface like dado/ skirting etc including 10mm thick rendering in CM 1:4 including dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 69 | M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 70 | M & L for non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.16 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 71 | M & L for non - skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 72 | Dismantling timber scantlings 40 sq. cm and over framed work in section, in any position complete all as specified and directed. |
| 73 | M&L for MS Roof trusses (framed), trussed, purlins, crane gantries, rails, bolts and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 74 | M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including taking down asbestos (corrugated, semi-corrugated etc) sheets in roof covering complete all as specified and directed. |
| 75 | M&L for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down asbestos (corrugated, semi-corrugated etc) sheets in roof covering all as specified complete all as specified and directed.. |
| 76 | M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc Fixed with L-type or J-type or cranked hook bolts including taking down asbestos (corrugated, semi-corrugated etc) sheets in roof covering all as specified and directed . |
| 77 | M&L for 6mm thick two piece AC serrated Ridges for corrugated sheet with 'L' or 'J' hook cranked bolts including dismantling old ridge complete all as specified and as directed. |
| 78 | S & F in repairs for aluminium hat pegs soilid body 125 mm to 175 mm complete all as specified and directed. |
| 79 | Taking down alluminium door/ window complete shutter with/ without frame as per requirement and repair to butt hinges/ any type of hinges screw (incl S&F hinges/any type hinges/ screw/ rubber biding if required) and fixed to frame / wall complete all as specified and as directed. |
| 80 | Easing of wooden window shutters/CB shutters (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustement of tower bolts sliding bolt etc. complete all as specified and directed. |
| 81 | Easing of wooden door shutters (One unit shall comprise of one door shutter irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustement of tower bolts sliding bolt etc. complete all as specified and directed. |
| 82 | Easing of steel window shutters (One unit shall comprise of one window irrespective of number of leaves) for properly closing/opening, welding of hinges or handles (including of handles/ hinges if required) or changing the position of hinges, complete all as specified and directed. |
| 83 | S & F in repairs 32 mm bore and 750 mm long PVC waste pipe for WHB complete all as specified and directed. |
| 84 | S & F in repairs Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed. |
| 85 | S&F in repairs, mild steel chromium plated grating (round) 125 mm dia fixed in cement mortor (1:3) over floor / nahani trap (with hole and without hole) complete all as specified and directed. |
| 86 | S & F of 25 mm dia stainless steel fancy type curtain rod with and including mild steel matching to colour fancy type brackets, stops, in suitable size and necessary rings, side caps etc. complete all as specified and directed. |
| 87 | S&F rubber door cill 40/50mm as required in door cill complete with required nails etc complete all as specified and directed. |
| 88 | S&F door seal brush with aluminium holder length 85 CM to 90 CM complete with required nails etc complete all as specified and directed. |
| 89 | S & F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring having overall length of cover plate 150mm , fixed in floor all as specified and as directed. |
| 90 | S & F in repairs CP toilet paper holder complete all as specified and directed. |
| 91 | S & F in repair of magnet suitable for cupboard shutters, shelfs etc complete all as specified and directed. |
| 92 | S & F / Repairs ss foldable towel shelf 450mm long with lower hangers fixed to wall ss screws etc, complete all as specified and directed. |
| 93 | S&F corner sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 94 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 95 | S&F in repairs, stainless steel plate rack of overall size 24” X 30” X 10”, made out of 1 mm thick stainless steel sheet and fixed in postion complete all as specified and directed. |
| 96 | S & F in repairs for factory made Pre laminated PVC shutter of 6mm(+ - 0.7) thickness consisting of panel of 6 mm(+ - 0.7) thick celuka ply of density 600 Kg / Cbm manufactured by an ISO-9000 certified company using for back side shutter celuka ply 9 mm(+ - 0.7) thick cut in desired size of shutter and fixed with the frame of kitchen accessory etc complete as direction of GE, manufacturer's specification and drawing complete all as specified and directed. |
| 97 | S & F in repairs for factory made Pre laminated PVC shutter of 18 mm(+ - 0.7) thickness consisting of panel of 18 mm(+ - 0.7) thick celuka ply of density 600 Kg / Cbm manufactured by an ISO-9000 certified company using for shutter celuka ply 18 mm(+ - 0.7) thick cut in desired size of shutter and fixed with the frame of kitchen accessory at all four edges of shutter using 13/6 size self tapping steel. The thickness of the shutter is edge lipped by 18 mm width x 1 mm thick PVC sheet using solvent cement etc. including stainless steel handle, tower bolt, magnet etc complete as direction of GE, manufacturer's specification and drawing complete all as specified and directed. |
| 98 | S&F stainless steel basket cutlurry size-15\\"x20\\"x4\\" (width may be vary as per site contion from 15\\" to 21\\") incl powder coated drawer runner/ channel and soft close as required complete all as specified as per manufaturer instruction (PVC shutter/ board paid seperately). Make Hitachi and equivalent |
| 99 | S&F stainless steel basket plain size-15\\"x20\\"x6\\" (width may be vary as per site contion from 15\\" to 21\\") incl powder coated drawer runner/ channel as required complete all as specified as per manufaturer instruction. Make Hitachi and equivalent. |
| 100 | S&F stainless steel basket for plate size-15\\"x20\\"x6\\" (width may be vary as per site contion from 15\\" to 21\\") incl powder coated drawer runner/ channel as required complete all as specified as per manufaturer instruction. Make Hitachi and equivalent. |
| 101 | M & L for brick work in CM 1:6 using Sub class ‘B’ Bricks straight or curved on plan exc 6 m mean radius including demolition of Brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed . |
| 102 | M & L for brick work in CM 1:4 using Sub class ‘B’ Bricks straight or curved on plan any radius in half brick complete including demolition of Brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed . . |
| 103 | M & L for providing 15 mm thick rendering with cement mortar 1 : 6 finished even and smooth (without using extra cement) including taking down cement or cement lime plaster from brick or stone walls etc incl. racking out joints, hacking for keys, scrubbing down with water etc. |
| 104 | M & L for precast cement concrete type B 1 1 : 2 : 4 in landings, kitchen platform etc and similar articles with plain faces, with plain fair faces, including chamfers, weathering, throating etc and setting in mortar complete with joints to match set in CM 1:6 including demolition of RCC of any description and in any position complete all as specified and directed. |
| 105 | M & L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required incl cranking, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 106 | S&F granite( of any type) stone slab of 20mm thick laid over 15mm thick cement screed bed in CM1:6 machine cut,size and jointed over grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and bull nosing complete all as specified and directed. |
| 107 | S & F in repairs PVC (SWR) bends / elbow 110 mm complete all as specified and directed. Make : Prince or equivalent. |
| 108 | S & F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (75 mm bore) including taking down complete all as specified and directed. Make : Prince or equivalent. |
| 109 | S & F in repairs PVC (SWR) bends / elbow 75 mm complete all as specified and directed. Make : Prince or equivalent. |
| 110 | S & F in repairs PVC (SWR) 'T' 110 mm complete all as specified and directed. Make : Prince or equivalent. |
| 111 | S & F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110 mm bore) including taking down complete all as specified and directed. Make : Prince or equivalent. |
| 112 | S&F in repairs tank lid/cover made out of with 0.63mm thick PGI sheet, 470 mm dia suitable for fixing in water tank capacity 500/1000 ltrs incl 4 sides fastening arrangements with nut and washer having exposed surface sharp edges 08 nos stings by cutting/rivetting of PGI sheets to protect by monkey menace complete all as specified and directed. |
| 113 | Cleaning of HDPE tank of capacity of 500/1000 Litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete all as directed. |
| 114 | M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in floor, hard standing, plinth protection etc 75 mm thick finished even and smooth without using extra cement laid in alternate bays n'exc 2.50 Sqm and joints filled with with mastic filling including demolition of cement concrete (un-reinforced) of any description and laid in any position complete all as specified and directed. |
| 115 | M&L for 40mm thick PCC type B1, 1:2:4(20mm graded stone aggregates) as in floor finish surface even and smooth using extra cement including demolition of cement concrete (un-reinforced) of any description and laid in any position complete all as specified and directed. |
| 116 | M & L for providing 10 mm thick rendering with cement mortar 1 : 6 finished even and smooth (without using extra cement) including taking down cement or cement lime plaster from brick or stone walls etc incl. racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed. |
| 117 | M & L for providing 15 mm thick rendering ( external surfaces) with cement mortar 1 : 4 finished even and smooth (without using extra cement) including taking down cement or cement lime plaster from brick or stone walls etc incl. racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed. |
| 118 | M&L for providing rendering 10 mm thick in CM (1:3) as in ceiling concrete surface finish even and smooth of any description etc including taking down cement or cement lime plaster from brick or stone walls etc incl. racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed. |
| 119 | M & L for preparation of newly plastered surfaces of walls and applying 1.00mm thick wall care putty of approved makes as on wall surfaces and a coat of wall primer and two coats of oil bound distemper (White or tinted) complete all as specified and directed. Note : - Applying with roller for painting (Internal surface) along with necessary scaffolding & necessary arrangement. |
| 120 | M & L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint using automatic airless spray machine along with necessary arrangement complete all as specified and directed. |
| 121 | M & L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. Note : - Applying with roller for painting (Internal surface) along with necessary scaffolding & necessary arrangement. |
| 122 | S & F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 123 | S&F MS framed work such as grills, gratings, hold fast etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bar, barred iron door, ladders, framed balusters, walk way, railings frame work of water tank and similar work confirming to Fe 290 Gde E165 complete all as specified and directed. |
| 124 | M & L for preparation of newly steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 125 | M&L for powder coated Anodised aluminium frame for doors, windows, ventilators, partition walls etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 126 | M&L for powder coated aluminium door shutters, aluminium section of following size top rail, 100mmx44mm middle rail 150mmx44mm and bottom railof size 150mmx25mm, including 01 no mortice lock, necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges if required, anodised aluminum snap beading screws etc. required complete all as specified and directed. |
| 127 | S&F sheet glass 4.8 mm thick ordinary quality and glazing with neoprene beading to aluminium frame complete exc 0.5 sqm in each pane complete all as specified and directed. Please Enable Macros to View BoQ information |
| 128 | S&F sheet glass 4.8 mm thick ordinary quality and glazing with neoprene beading to aluminium frame complete exc 0.5 sqm in each pane complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender