Tender For Construction Of 2 Acr Of Size 20X18 With 7 Feet Varandah At Ups Ker Mahanpur Under District Capex Budget 2026-27, Sector Elementary Education Zone Mahanpur, Block Dhar Mahanpur Under District Capex Budget 2026-27 (Education Sector) Tende
Tender Value
25.63 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
0 days left
EMD
51260
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 2 Acr Of Size 20X18 With 7 Feet Varandah At Ups Ker Mahanpur Under District Capex Budget 2026-27, Sector Elementary Education Zone Mahanpur, Block Dhar Mahanpur Under District Capex Budget 2026-27 (Education Sector) Tender Amount 25.63 Lac
BOQ
| Sl. No. | Item Description |
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: EXECUTIVE ENGINEER REW DIVISION KATHUA Name of Work;- Construction of 2 ACR of size 20x18 with 7 feet varandah at UPS Ker Mahanpur under district Capex budget 2026-27, Sector Elementary Education Zone Mahanpur, Block Dhar Mahanpur under District Capex Budget 2026-27 (Education Sector) Tender Amount 25.63 Lac Contract NO:- District Capex Elementary Education 2026-2027 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S. No. Item Description Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Earth work in excavation by manual means over areas (exceeding 30 cm and upto 1.5 m in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth upto one metre from cutting edge, disposed earth to be levelled and neatly dressed in: All Kinds of soil. |
| 3 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 1 Osqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: All kinds of soil |
| 4 | Providing and laying in position cement concrete of (1:5:10)grade excluding the cost of centering and shuttering using 40mm size agg. |
| 5 | Providing and laying in position cement concrete of (1:3:6) grade excluding the cost of centering and |
| 6 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)(30% boulders) |
| 7 | Brickwork with 2nd class bricks in 1:6 mortar(9\\") |
| 8 | Extra for brickwork in superstructure |
| 9 | Providing and laying in position (1:1.5:3) grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcementUpto Plinth level |
| 10 | Columns |
| 11 | Slab & beam |
| 12 | Reinforcement for RCC work including cutting,straightening ,bending ,binding etc. |
| 13 | Flooring 50mm thick in 1:2:4 mix |
| 14 | Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 15 | Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. |
| 16 | Plastering with plaster in 1:6 mix12mm thick |
| 17 | Plastering with plaster in 1:6 mix15mm thick |
| 18 | Plastering with 6mm thick plaster (1:3) |
| 19 | Filling available excavated earth in trenches including ramming in layers not exceeding 20cm in depth |
| 20 | Centring and shuttering including struting propping removal for foundation etc |
| 21 | Suspended floor |
| 22 | Column |
| 23 | Edging of slab below 20 cm |
| 24 | Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc. |
| 25 | Providing and fixing strips in joints of terrazzo/ cement concrete floors. Glass strips 40 mm wide and 4 mm thick |
| 26 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Sal wood |
| 27 | Providing and fixing panelled or panelled and glazed shutters(30mm) for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately. 2nd class deodar |
| 28 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Particle Board 12mm thick .Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked |
| 29 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class deodar wood 50x12mm |
| 30 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30mm thick2nd classdeodar wood |
| 31 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge : |
| 32 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0. 901itre/1 Osqm over an under coat of primer applied @ 0. 801itre/1 Osqm of approved brand and manufacturer |
| 33 | Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0. 901itre/1 Osqm over an under coat of primer applied @ 0. 751itre/1 Osqm of approved brand and manufacture |
| 34 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 35 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 36 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 37 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete . Fixed to openin/wooden frames with rawl plug screws etc |
| 38 | Anodised Aluminium handles 125 mm with plate 175x40 mm |
| 39 | AnodisedA!uminium handles 100 mm with plate 118x33 mm |
| 40 | Anodised Aluminium tower bolt (barrel type) 250 x1 0 mm |
| 41 | Anodised Aluminium tower bolt (barrel type) 150 x1 0 mm |
| 42 | Anodised Aluminium sliding door bolt 300 x16 mm |
| 43 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 44 | Supply of Exhaust fanWall / Ceiling Fans 230V 50Hz celing fan with double ball bearing with low power consumption of following sweeps |
| 45 | Supply of LED bulb 9w |
| 46 | Supply & fixing 25mm square core aluminium cable as req. |
| 47 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 12.58.1 75 mm diametre 12.58.2 110 mm diametre |
| 48 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion110 mm bend |
| 49 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.M.S. tube |
| 50 | Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations.a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 andapproved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment.b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with waterproofing compound conforming to IS 2645 and approved by Engineerin-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs)c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge.d) finishing the surface with 20mm thick joint less cement mortar of mix1:4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge includinglaying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm/sq 3mm deep.e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineerin-charge.23.7.1 With average thickness of 120mm and minimum thickness at khurra as 65 mm |
| 51 | Carriage of cement avg 800m HL |
| 52 | carriage of Sand 70 Km MT and 800m HL |
| 53 | carriage of Bjari 70km MT and avg 800m HL |
| 54 | Carriage of Bricks 105Km MT and avg 800m HL |
| 55 | Carriage of steel avg 800m HL |
| 56 | Providing and fixing inauguration plaque made of polished granite stone, size 600 mm × 450 mm × 20 mm (or as approved), including machine-cut edges, fine polish, includinh high-quality gold paint (weather-resistant), complete with border design, cleaning, curing, and all finishing work. The plaque shall be fixed on a cement concrete pedestal/wall using stainless-steel clamps/adhesive, including all labour, materials, tools, transportation, and incidental charges to complete the job as per engineer-in-charge directions. Total in Figures Excess(+) 1.0 Full Conversion INR 2563067.0 2563067.0 INR Twenty Five Lakh Sixty Three Thousand &Sixty Seven Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender