Tender For Construction Of 6 Roomed Double Storied Building At Hs Homhuna.
Tender Value
1.96 Crore
Estimated cost
Bid Submission
24 Jul 2026
11 days left
EMD
3.93 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shopian → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 6 Roomed Double Storied Building At Hs Homhuna.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 2 | Filling available excavated earth (exluding rock) in trenchs, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidated each doposited layer by ramming and watering, lead upto 50 m lift upto 1.5m |
| 3 | Providing and laying of stone soling (hand packed) including watering,dressing and ramming with all carriages loading,unloading and stacking etc. |
| 4 | Providing & laying in position cement concrete of specified grade including curring but excld. the cost of centring and shuttering all work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Including cost of material involved complete. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including cost of material involved complete. |
| 6 | Dry random rubble masonary with hard stone in foundation and plinth: with bond stone including carriage. Nallah |
| 7 | Supplying and filling of RBM in plinth incl. spreading, dressing,watering with all carrriage etc complete |
| 8 | Providing & laying in position cement concrete of specified grade including curring but excld. the cost of centring and shuttering all work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Including cost of material involved complete. |
| 9 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Including cost of material involved complete. |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Including cost of material involved complete. |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete in sub structure and superstructure Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 12 | Centering and shuttering including strutting , proping etc. and removal of form for : foundation, footings, basis of columns etc, for mass concrete. |
| 13 | Centering and shuttering including strutting , proping etc. and removal of form for : lintel beams , plinth beams ,girders, bressumers and cantelevers. |
| 14 | Centering and shuttering including strutting , proping etc. and removal of form for : columns , plillars , piers, abutments, posts and struts. |
| 15 | Centering and shuttering including strutting , proping etc. and removal of form for : Suspended floors, roofs, landings , balconies and access platforms. |
| 16 | Centering and shuttering including strutting , proping etc. and removal of form for : Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 17 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) including all carriages complete. (For Septic Tank). |
| 18 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level all carriages complete |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported kail wood. |
| 20 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) .Imported kail wood. 35mm thick. |
| 21 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Imported kail wood. |
| 22 | Providing and fixing glass panes with required beading and glazing clips in doors, windows, clerestory windows, all complete with : 3mm glass panes |
| 23 | Providing and fixing Wire gauze with required beading and clips in doors, windows, clerestory windows, all complete with : Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading. Imported Kail Wood. |
| 24 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc complete. 125mm |
| 25 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc complete. 75mm |
| 26 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 27 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm |
| 28 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 100x10 mm |
| 29 | Providing and fixing ISI marked oxidized M.S. air hook with necessary screws eqivalent |
| 30 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc complete: 300x16mm |
| 31 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 32 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 33 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 34 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 35 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. (Triple Layer) |
| 36 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 37 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 38 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 39 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 40 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 41 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:32mm dia |
| 42 | Providing and fixing Jali for water closet or wash basin including PVC Waste fittings complete. |
| 43 | Providing and fixing PVC Pipes class c pipe including Soill, waste and vent pipes Type-B. 100mm |
| 44 | Providing and fixing PVC Pipes class c pipe including Soill, waste and vent pipes Type-B. 75mm |
| 45 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 16mm OD(SDR-7.4) |
| 46 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 25mm OD(SDR-7.4) |
| 47 | Providing & Fixing PVC ( Prince Make) following fittings complete |
| 48 | Door Tee 100mm size |
| 49 | Door Tee 75mm size |
| 50 | PVC collar 100mm |
| 51 | PVC collar 75mm |
| 52 | PVC Reducer 100x75mm |
| 53 | Floor Trap 100 mm size |
| 54 | Plain Bend 100 mm size |
| 55 | Plain Bend 75 mm size |
| 56 | Door bend 100mm |
| 57 | Door bend 75mm |
| 58 | Providing & Fixing following C.P fittings of standard quality & approved make incl. all fixtures etc complete as per directions of engineer in charge |
| 59 | Nipples of different sizes |
| 60 | Bib cock |
| 61 | Angle valve |
| 62 | Ball valve |
| 63 | Coupling |
| 64 | Basin Mixer |
| 65 | Providing and fixing PTMT liquid soap container |
| 66 | C P Gratings |
| 67 | Wall Mixer |
| 68 | Construction of 9\\" thick brick masonary manholes in cement mortar (1:4) mix, foundation cement concrete ( 1:4:8) ,12 mm thick inside cement plaster with finishing, making channels in cement concrete ( 1:2:4) incl. cost of manhole covers PVC ISI mark with frame size ( 1'-6\\" x1'-6\\" x 1'-6\\") inside size |
| 69 | Providng and Fixing of Geysers 50Litre 2000watt storage water heater (white) including all fittings and fixtures make : venus, jacquar, racold or equivalent. |
| 70 | Structural steel welded in built up sections trusses and framed work incld cutting,hoisting fixing in positon and applying a priming coat of approved steel primer incl. painting all complete. Welded. |
| 71 | Providing and fixing high rib color coated corrugated galvanized PPGI sheets 1000-1020mm cover width 28-35mm high crests at 250-255mm TCT (total coated thickness) high tensile SMP galvalumesteel with silicon modified polester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5 micron polyster back coat over 5 micron primer coats on both surfaces including side and end lap andusing 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area) 0.5mm thick ( TATA, JSW or EQ brand) i/c all carriages/H/Load i/c 60cm wide ridges and valleys wherever required i/c all fittings and fixtures in roof sheeting (Tile Profile). |
| 72 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 73 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 74 | Carriage for Different Materials. |
| 75 | Crushed aggregate average lead of 10 Kms |
| 76 | Sand average lead of 10 kms. |
| 77 | Bricks average lead of 5 kms |
| 78 | Disposal of excavated earth average lead 3km |
| 79 | Electrical Part |
| 80 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge ) single core cable in surface / recessed medium class PVC conduit, including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete, with modular switch Antibacterial series ( Legrand /ABB / Siemens make.), modular plate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 81 | Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge ) single core cable in surface / recessed medium class PVC conduit,including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete, 2way modular switch,Antibacterial series ( Legrand /ABB / Siemens make.) modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. |
| 82 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge ) single core cable in surface/ recessed PVC conduit,including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete as required. |
| 83 | Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire , FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge )) single core cable in surface/recessed medium class PVC conduit.including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete |
| 84 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge ), single core cable in surface/ recessed medium class PVC conduit as required.including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete |
| 85 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 86 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 87 | 2 X6 sq. mm + 1 X 6 sq. mm earth wire |
| 88 | 2 X 16 sq. mm + 1 X 6 sq. mm earth wire |
| 89 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 90 | Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required |
| 91 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, Antibacterial series ( Legrand /ABB / Siemens make.)connections etc. as required. |
| 92 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,modular plate, suitable GI box , connections etc. as required. Modular Switch & Socket:- Antibacterial series ( Legrand /ABB / Siemens make.) |
| 93 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- Antibacterial series ( Legrand /ABB / Siemens make.) |
| 94 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required.Antibacterial series ( Legrand /ABB / Siemens make.) |
| 95 | Supplying and fixing of following sizes of medium class PVC conduit( Anchor/ Ravindra/ Eq. make)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete |
| 96 | 25 mm |
| 97 | 32 mm |
| 98 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).(legrand / Schinider/ L&T ./ABB/equivalent standard make as directed by engineer incharge.) |
| 99 | 6 way (4 + 18), Double door |
| 100 | Supply installation testing and commissioning of 18 W + LED Surface/recess, Mounted light luminary fitting,square or round shape with minimum system lumen efficacy ≥ 120 lm/Watt with Pressure Die cast Aluminium Housing and Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/ Helonix/Wipro / Regent make / sample to be approved before installation.. |
| 101 | S/F testing and comm. Of surface mounted LED Batten 20 watt-22 watt +- 1watt commercial series (cool/warm) 4 ft. with minimum system lumen efficacy of ≥ 120 lm/Watt with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. Philips/ Helonix /Wipro make. sample to be approved before installation. |
| 102 | S/F testing and comm. Of MCB's 10 kA of the below mentioned capacities in sub main controls legrand C curve/ Schinider Acti 9/ L&T ./ABB make as directed by engineer incharge. |
| 103 | a) 6-32 Amp SP MCB |
| 104 | b) 40-63amp DP MCB |
| 105 | Supply installation testing and comm. Of 200-250mm sweep exhaust fan Shutter type of havell /Bajaj/Crompton make as directed by engineer incharge, including making of space in wall/ window as per site requirement and necessary connections. |
| 106 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete . USHA /Havells /Crompton/orient make as directed by engineer incharge. |
| 107 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.Antibacterial series ( Legrand /ABB / Siemens make.) |
| 108 | Supply fixing testing and comm. Of backlite holder /batten holder/angle holder/ceiling rose SSK/Anchor make incl. PVC Block. |
| 109 | Providing of Chemical earthing as per IS standards by way of digging 10' deep pit then embedding 3 meter G.I Earthing electrode , 80mm dia. connecting the plate with main control board by 10 SWG copper wire with 1/2\\" dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical compound. |
| 110 | Supply, laying ( partly underground/partly overhead) , testing and commissioning of PVC alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size. |
| 111 | 70 sq.mm 3.5 core ( armoured) |
| 112 | Supply installation testing and comm. of flood light 100 W ( warm, white ), Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07, , with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC,lower THD, toughned glass and secondary lens,Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/ Havell /Wipro/Crompton make. the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job. |
| 113 | Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) |
| 114 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. |
| 115 | Normal INCOMING: |
| 116 | Adj. TMR Based MCCB 160 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH Legrand/ Shinider/Semiens/ABB make. |
| 117 | 4 No. of Aluminium Bus Bar of 300 Amp. |
| 118 | Digital meters and phase indicators -1 set. |
| 119 | onload Change over switch 100 Amp for generator.Front operated. |
| 120 | 4 No. of Aluminium Bus Bar of 200 Amp. |
| 121 | Digital meters and phase indicators -1 set. |
| 122 | Inverter Incommer |
| 123 | 100 amp DP MCCB 16 K including spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens/ABB make. |
| 124 | 200 Amp 2 strip bus bar |
| 125 | Digital meters and phase indicators -1 set. |
| 126 | OUTGOING: |
| 127 | 40-63amp DP MCB c curve 10 K Legrand/ Shinider acti-9/ABB make, sample to be approved before installation. |
| 128 | space for 10 way MCB's |
| 129 | Supply, Installation, Testing & Commissioning of 6 KVA single-Phase IN single-Phase out ON Line UPS System to provide backup time of 60 minutes at full load, With In-Built Isolation Transformer of reputed make dully ISI Marked (APC Schineider/ETON/VERTIV/ equivalent standard make ) (Compitable to Genrator Supply having varing frequency) With on line double conversion topology, high frequency techonology, with front LCD,automatic bypass for fault tolerance & complete with required Number, 12 Volts 65 AH SMF VRLA Batteries ( Exide/ Amaron/Quanta make) with connecting links with angle iron battery stand complete job, complete with battery rack with two year warranty against any manufacturing defect. The job further includes AMC for UPS and batteries for a period of three years with replacement warrenty reckoned from date of sucessfull commissioning. |
| 130 | Supply, installation, testing and commissioning of 75 inch 4K Ultra HD Interactive Flat panel Digital Board/ smart Board with OPS Facility best for teaching screen, Display resolution Max. 3840x2160, anti glareglass, Multi touch screen, Stylus Dock, bluetooth, WIFI, USB, Ethernet, HDMI facility. samsung/Christe/LG make ( 3 years onsite warranty) see Annuxur-A for detailed specification. |
| 131 | Supplying, Laying and Drawing of UPT-4 pair CAT-6 LAN cable drawn partly in recessed/surface conduits, mounted raceways and partly in existing cable ducts in modular furniture complete as per specifications and as required. |
| 132 | Supply, Installation, Testing and Commissioning of 16 port Networking switck (Dlink/Eq make) |
| 133 | Supply, Installation, Testing and Commissioning of RJ 45 Data outlets with single back box of 27 Dlink/Legrend/siemens make with making of necessary connections through networing engineer and as required at site |
| 134 | Supply,Installation,Testing and Commissioning of CAT-6, 16 port jack panel for termination of CAT-6 cable, testing and certification of network with Omini penta scanner of each cable of reputed make as desired by EIC (HP/DIGISOL/D-LINK) |
| 135 | Supply,Installation,Testing & Commissionig of 9U Networking Racks(Fully Loaded)(HP/DIGISOL/D-LINK),Incl making of necessary connections |
| 136 | Mechanical Part |
| 137 | Fire Fighting System |
| 138 | Supply, installation, testing & commissioning of single headed, gunmetal ISI marked oblique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with plastic cap and GI chain, twist release type plug and all accessories as per IS:5290-1983 (Type 'A'). |
| 139 | Supply, installation, testing & commissioning of swinging type First-Aid fire hose reels wall mounting, fitted with of heavy duty mild steel construction with CI brackets,25 mm dia. ball valve and 20 mm dia.x30m long high pressure Hose Reel tubing as per IS:444 with Stainless Steel shut-off nozzle having 5 mm dia. orifice.The hose reel shall strictly confirm to IS:884-1985. |
| 140 | Providing and fixing 63mm dia 15m long non percolated rubberized fabric lined hose including gunmetal male and female instantaneous type coupling approved by fire authority, machine wound with copper wire complete in all respects, hose shall conform to IS:636 type II and coupling to IS:903-1975 (ISI marked) |
| 141 | Providing and placing in proper position gunmetal 63mm dia short size branch pipes with 20 mm dia nozzles with 63mm instantaneous coupling ISI marked (IS:903). |
| 142 | Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete. |
| 143 | Providing and fixing fully glazed MS fully welded construction double leaf door shutter for fire hydrant station fabricated from MS 50x50x6 mm angle iron frame, fixed to wall and hinged MS 40x40x5 mm angle iron door shutter with required MS sash bars for glazing complete with locking arrangements, stove enamelled fire red finish with 'FIRE HYDRANT' written in front. Approximate size 900mm x 600mm x 500mm. |
| 144 | Providing and fixing 2 way gunmetal fire brigade inlet breaching head as per IS:904 specification tested for 20Kg/sq-cm with 63mm dia instantaneous type inlet and 150/100mm dia flanged outlet with built in check valve for fire brigade connection to underground/above-ground tanks and fire risers including companion flanges including nuts, bolts & washers etc. |
| 145 | Supply, installation, testing & commissioning of pressure gauges with isolation cocks and chrome plated copper pipes as hydrant station to read pressure from 0-25 kg/cm2 . |
| 146 | Pipes & Accessories: |
| 147 | Piping |
| 148 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required( to be paid as per actual) |
| 149 | 125 mm Dia |
| 150 | 100 mm Dia |
| 151 | 80 mm Dia |
| 152 | 65 mm Dia |
| 153 | 25 mm Dia |
| 154 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required |
| 155 | 100mm |
| 156 | Providing and fixing CI double flanged horizontal/ vertical type non-return valve including nuts, bolts, matching flanges (screwed or welded) complete with 1.5mm thick compressed asbestos gasket of same rating, complete to IS:5312, part-I, swing type, class PN 1.6. of following size: |
| 157 | 100mm |
| 158 | Providing and fixing CI double flanges epoxy coated SS- screen Y suction strainer (PN 1.6) “Y” type including, nuts, bolts and 3mm thick rubber insertion complete. |
| 159 | Providing and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure as per requirement and test pressure 150% of working pressure with unit control. |
| 160 | Providing and Fixing of Pressure Switch in MS pipe line including neccessary connection etc for automatic starting of main pump in case of sudden pressure loss in the system including connection etc as required. |
| 161 | Supplying and fixing orifice plate (Pressure Reducing Valve) made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 - 7 kg/cm2 complete as required. |
| 162 | Fabrication of support structure for terrace tanks includes the supply, fabrication, and installation of steel angles, beams, and support frames, fixed to concrete slabs using base plates and anchor bolts. |
| 163 | Providing and fixing liquid level controller for fire pump to cutoff in case low level of water in tank including cables, pannel etc. and making necessary connection to panel and commissioning. |
| 164 | P/F of FRLS electrical cables from nearest SubStation to control panel and from Control panel to Electric driven fire pump and from control panel to start button . 3.5 Core x 35 Sq mm Al Cable (including thimblings,crimping etc. and other accessories of suitable rating as per requirement).(to be paid as per actual) |
| 165 | Supply, installation, testing & commissioning of air cushion tank (air-vessel dimensions not less than 250 mm dia. X 1.2 m high) with dished top, made of minimum 8 mm thick MS pipe/plate complete with 25 mm dia. brass air valve (ball valve, pressure gauge type), 25 mm dia brass stop cock, nipple, tees, B46 elbow, pipe and all accessories as required including fixing brackets, painted with synthetic enamel paint of approved shade as required. |
| 166 | Supply, installation, testing & commissioning of gun metal ball valve 25mm diameter( paid as per actual) |
| 167 | Supply, installation, testing & commissioning of 25mm dia automatic air release valves including all accessories as per requirement. |
| 168 | Fire Pumps and Accessories |
| 169 | Supplying, installation, testing and commissioning of electric driven terrace pumpconforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as requireda) Providing and fixing of horizontal split casing single/multi stage, single outlet pumping set with bronze impeller & with gland capable of delivering 450 LPM against at total head of 35 M with Cl. body and connected by a flexible coupling to a totally cnclosed fan cooled induction motor mounted on a common structural base plates with all punp accessories complete as per specifications including pressure gauge with gunmttal isolation valves and anti vibration pads, motor to be suitable for 415 volts, 3 phase, 50 cycles AC supply (Specification as per fire fighting requirements).b) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 volts ±15%, 3 phase 50 Hz AC supply of suitable capacity as per requirment for the above pump with synchronous speed of 1500/3000 RPM confining to IS:325 & duly coupled with above pump coupled with flexible coupling inciuding earthening as per relevant Indian Standard and specifications.c) Common bed plate for mounting pump and motor fabricated of suitable MS channel as per manufacturer's recommendations.d) Suitable cement concrete foundation duly plastered and with anti vibration pads.The job is inclusive of P/F of reducers/expanders as per site requirements to connect pump suction and discharge with the system |
| 170 | Supply, installation, testing & commissioning of 10 KVA Servo- stabilizer including all allied electrical accessories includig trransformer oil. The stabilizer should have following specifications:main supplya) Capacity: 10 KVA, 3-phase unbalanced typeb) Input: (138.5-280) V AC P-N; (240 - 485) V AC P-P c) Output: 415 V ± 1% - phase to phased) Supply: 3 phase, 4 wires, 50Hze) Operation: Automaticf) Duty cycle: Continuousg) Transformer windings: Copper wound on CRGO laminations as per IS specificationsh) Cooling: Oil cooled i) Efficiency: Better than 98% at full loadj) Overload capacity: 15% for continuous 4 hoursk) Waveform distortions: Nill) High speed voltage correction: up to 8V to 20V per secondm) Protections: Under voltage, Over voltage and Overload with time delayn) Other features: LED indicators, Digital AC ammeter, AC voltmeter, Frequency meters, Phase Sequence meters, Single phase preventer, and Stabilizer by-pass arrangement. The Job also includes P/F of 100 Amp 4 Pole MCCB as incomer to the Servo Stabilizer to be provided in CRC Enclosure. |
| 171 | Providing, installing, testing, and commissioning of a control panel made out of SWG 16 MS sheet metal suitable for the above terrace pump, ensuring automatic operation. The panel shall be:Enclosure: Wall-mounted, IP55-rated MS powder-coated enclosure conforming to IS standards.Incoming Protection: Suitably rated MCCB(63A) with overload and short-circuit protection.Starter: Star-Delta starter (as per motor rating) with a thermal overload relay.Control Features:Fully automatic operation with start/stop push buttons and an auto/manual selector switch.Digital voltmeter and ammeter with a selector switch for electrical parameter monitoring.Phase sequence relay and phase failure protection.Indicating lamps for power supply, motor running, and fault indication.150 A Al bus bars, properly insulated and rated as per system requirements.Panel-mounted cooling fan/ventilation if necessary. P/F of Internal/Control wiring including in the job Outgoing MCCB for motors and other accessories of suitable rating. |
| 172 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 173 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) (to be paid as per actual) |
| 174 | Providing, fitting of total 10000 ltr (5000 ltr x 2No.) HDPE tank with necessary connections and accessoris/fittings, interconnected pipes, and valves etc as per requirement. |
| 175 | Fire Extinguishers |
| 176 | Supply and installation of Carbon-di-oxide fire extinguishers including stand bearing IS:15683 marking fixing to wall including brackets etc consisting of Aluminium cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug / dash fasteners complete with internal charge. The Carbon-di-oxide filled in the cylinder must be as per IS 15222. The Fire Extinguisher shall be provided with NABL Test Report. Warranty of the product should be 5 years confirmed by OEM Capacity 4.5 kg (I.S.I marked). |
| 177 | Supply and installation of Dry powder type ABC extinguishers(Gas Cartridge type) including stand bearing IS:15683 marking fixing to wall including brackets etc of 9 kg capacity .It Shall have simple squeeze grip activation mechanism , ABC Dry Powder should not only cut off oxygen supply to the fire but also interferes with the chemical reaction necessary to sustain a fire and fights Class A, B, C and electrically started fires. The Fire Extinguisher shall be provided with NABL Test Report. Warranty of the product should be 5 years confirmed by OEM Capcity: 9 Kgs (I.S.I marked) |
| 178 | Providing and fixing (In proper concrete foundation) of fire bucket stands including 6 No. Buckets of 9 litre capacity with canopy at designated locations filled with dry sand. |
| 179 | Supply and installation of illuminated fire exit signages. This sign may be used to indicate all exits which can be used in the event of an emergency . It shall be accompanied by an arrow as per IS-12349 (1988) standards |
| 180 | Fire Alarm and Detection System |
| 181 | Supply,Installation,Testing and Commissioning of Miroprocessor based 2 -Zone Conventional Fire Alarm Control panel complete with all accessories including providing & fixing of 2 nos. 12 volt, 12 AH each sealed maintenance free batteries with charger. |
| 182 | Supply,Installation,Testing and Commissioning of Conventional Smoke Detector with builtin LED and mounting base complete with all connections etc as required. |
| 183 | SITC of Conventional Manual Call point of MS construction in surface/recess with Stainless steel chain and hammer assembly complete with glass and push button as required. |
| 184 | SITC of Conventional type Electronic Hooter for alarm/evacuation signal and necessary fixing arrangements with key complete as required. |
| 185 | Supply,Installation,Testing and Commissioning of 2 Core 1.5 sq mm PVC insulated copper conductor armoured cable XLPE Insulation, Extruded LSZH Inner Sheath, Extruded LSZH (Low smoke zero Halogen) Compound Outer Sheathed Fire Survival Armoured Cable. The job also includes providing and fitting of saddles and hinges as required.(to be paid as per actual) |
| 186 | Supplying and fixing of 25mm dia steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required..(to be paid as per actual) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender