Tender For Installation Of Additional Machinery And Related Electrical And Mechanical Works At Existing 71 Mld (28.9 Cusec) Storm Water Pumping Station Near Phed Under Mc Shahabad
Tender Value
21.17 Lakhs
Estimated cost
Bid Submission
08 Jul 2026
5 days left
EMD
49980
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kurukshetra → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of Additional Machinery And Related Electrical And Mechanical Works At Existing 71 Mld (28.9 Cusec) Storm Water Pumping Station Near Phed Under Mc Shahabad
BOQ
| Sl. No. | Item Description |
| 1 | Providing, Supplying, Installation, testing and commissioning of Air-Cooled ATS (Auto Transformer Starter) Panel with MCCB wth rotary handle, 3Nos. Power Contactors (AC3 Duty rated at 60n AMBIENT), suitable capacity power capacitors, high end electronic relay for UV/OV, SPP, ELR plus c?CT, Phalureun balance, dy run preventor, level controler, A plus ASS, y plus Vss, with selector switch, KWH Meter, LED Indicators for RY/B, Motor on?ip, PMU, prowision for remote on/off, HRC Fuse-link, DP MCB, PLC, SCADA Compatible, bolted type panel in powder coated finish, shade RAL 7032 with 10 tank proc?ss, PU gasket enclosure of 2mm cRCA, mounting plate of 25CRCA sheets cable entry from bottom , complete in all respects as per scope of work and specification (designed for a 100 HP non-clog submersible sewage pump set with an additional 25% loading margin for safety on 75BHP) complete in all respect Make- BCHLandT/Schneider Electric. |
| 2 | Providing. Supplying,.Installation, testing and commissioning of NON CLOG SUBMERSIBLE SEWAGE l PUMPSET(Power Driven Submersible pumps primarily designed for handling waste water with End Suction Enclosed Impeler and Volute Casing) sets fitted with effective motor, mechanical seal, thermal and moisture|sensor, suspension device, anti coupling bracket, guide pipe and Cable From Sump Well to pump Chamber and Panel including LT PMU auto coupling with integral bend (with auto coupling Pin Ss Foundation Bot Complete with base frame and RCC Foundation) complete in all respects as per |Scope of work and specification of Non Clog submersible pump set of discharge 600 cum/hr and 18 m head (75HP). Make- Aqua/Grundfos/KSB. |
| 3 | [20.10.3]Extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest Railway Station to site of works 3. 150 mm i/d [Through Rate] |
| 4 | [20.10.5]Extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest Railway Station to site of works 5. 250 mm i/d [Through Rate] |
| 5 | [20.10.8]Extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest Railway Station to site of works 8. 400 mm i/d [Through Rate] |
| 6 | [20.11.3]Providing and fixing cast iron double flanged swing check type reflux (non return) valves PN-1.6 marked with IS:5312 including nuts and bolts marked with IS:1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. Complete in all respect to the satisfaction of Engineer-in-charge 3. 150 mm i/d [Through Rate] |
| 7 | [20.11.5]Providing and fixing cast iron double flanged swing check type reflux (non return) valves PN-1.6 marked with IS:5312 including nuts and bolts marked with IS:1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. Complete in all respect to the satisfaction of Engineer-in-charge 5. 250 mm i/d [Through Rate] |
| 8 | [20.11.8]Providing and fixing cast iron double flanged swing check type reflux (non return) valves PN-1.6 marked with IS:5312 including nuts and bolts marked with IS:1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. Complete in all respect to the satisfaction of Engineer-in-charge 8. 400 mm i/d [Through Rate] |
| 9 | [20.114.4]Supplying erection, testing of fullyautomatic electric control panel board forT/Wells in Pump Chamber consisting ofMS sheet of thickness 14 gauge dulypainted box type floor mounted made ofangle Frame containing 1 no. fullyautomatic air brake starter suitable forMotor of the following capacity, Minswitch of suitable range with HRC fuse, 1no. volt meter (0 to 500 volts), 1 No.Amp. Meter of 0 to 100 amp. 3 sets ofindicating lamp capacitor of suitablecapacity and 1 no. single phase preventerswith the timer switch including wiring inpanel board and suitable electric energymeter wiring in Electric Control PanelBoard complete in all respect as perspecification given in Schedule No. II,Including MCB, suitable, Capacitor,Wooden Box etc as per siterequirement complete in all respect. 4. 25 HP Motor [Through Rate] |
| 10 | [20.66.2]Cutting DI pipe and chipping or filling the surface to a uniform finish 2. 150 mm i/d [Through Rate] |
| 11 | [20.66.4]Cutting DI pipe and chipping or filling the surface to a uniform finish 4. 250 mm i/d [Through Rate] |
| 12 | [20.66.7]Cutting DI pipe and chipping or filling the surface to a uniform finish 7. 400 mm i/d [Through Rate] |
| 13 | [20.68.1]Providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths Ductile Iron (DI) standard specials plain /flanged/ socketed confirming to IS9523-2000 with rubber ring (EPDM/SBR) joints such as tees, bends, tapers, caps etc. with in trenches in DI pipe line complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. 1. Up to 300mm dia [Through Rate] |
| 14 | [20.68.2]Providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths Ductile Iron (DI) standard specials plain /flanged/ socketed confirming to IS9523-2000 with rubber ring (EPDM/SBR) joints such as tees, bends, tapers, caps etc. with in trenches in DI pipe line complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. 2. Above 300mm dia and up to 600mm dia [Through Rate] |
| 15 | [21.108.44]Supplying, erection, testing andcommissioning of submersible motorpumping set non clog for seweragehaving head 20.00 m as per the indicatedrequirements of discharge in LPM andpower capacity in BHP as per IS markedincluding all accessories (like SS Pipes,SS Chain (Shackle Chain) ,SS FoundationBolt, complete base frame, Monorail,Chain Guide Line, Auto Compiling, DuctFoot Bend (D/F Bend) etc. complete in allrespect 44. Discharge Capacity (LPM) - 3500 Power Capacity (BHP) - 25 [Through Rate] |
| 16 | [22.161.2]Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 : 2. 150 mm dia Ductile Iron Double Flanged [Through Rate] |
| 17 | [22.161.4]Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 : 4. 250 mm dia Ductile Iron Double Flanged [Through Rate] |
| 18 | [22.161.7]Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 : 7. 400 mm dia Ductile Iron Double Flanged [Through Rate] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender