Tender For Providing Acoustic Sound Proofing System In Atal Sabhagar At Igmc Shimla. (Sh:- Providing Group Control Wiring & Circuit Wiring Therein.)
Tender Value
7.70 Lakhs
Estimated cost
Bid Submission
08 Jul 2026
5 days left
EMD
15400
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Acoustic Sound Proofing System In Atal Sabhagar At Igmc Shimla. (Sh:- Providing Group Control Wiring & Circuit Wiring Therein.)
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C |
| 2 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C |
| 3 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 4 | 3x1.5 Sq. mm. |
| 5 | 3x4 Sq. mm. |
| 6 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 7 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 8 | Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- |
| 9 | Supplying and fixing of following sizes of steel conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- |
| 10 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 11 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 12 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required. |
| 13 | Armoured cable 10 sq. mm (twin core) |
| 14 | Providing and installation of following type of recess/surface mounting 2 feet by 2 feet type LED Panel with PDC/CRCA housing ,anti glare prismatic multilayer diffuser complete with all accessories, connections, testing etc. as required: of Approved Make. |
| 15 | Wattage of LED fittings- As per following parameters |
| 16 | Total Lumens of the fittings-4320 Lumens. |
| 17 | Diffuser-Prismatic multilayer diffuser UGR<30 |
| 18 | Operating voltage-140 V to 270 V, AC supply or better. |
| 19 | Input frequency-50 Hz + 1 Hz |
| 20 | Power factor-Minimum 0.90 |
| 21 | Luminaire efficency->120 lm/w |
| 22 | Color rendering index-CRI shall be 80 |
| 23 | Working/ operating temperature-0 to + 45c or better |
| 24 | Color temperature-6000K to 10% |
| 25 | Electronic Driver |
| 26 | Drive current (LED)-As per OEM. |
| 27 | Operating voltage-140 V to 270 V AC supply or better |
| 28 | Type of driver-Constant current output driver |
| 29 | THD-Less than 10% |
| 30 | Surge Protection-2.5 KV minimum |
| 31 | Efficiency Driver->85% |
| 32 | Protection-Shall have under voltage and over voltage protection. |
| 33 | Guarantee of LED fittings including LED driver-2 years against manufacturing defect. |
| 34 | Fixture-Should comply with LM 79 test from NABL/UL lab. |
| 35 | LED Type/ Make/ Model-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 36 | Life of LED-50000 burning hours at 70% lumen maintenance |
| 37 | LED Panel 2x2 >4320 Lumens. |
| 38 | Supply & Erection of LED Downlighter round type surface with CRCA/PDC aluminium body and diffuser The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings. |
| 39 | Wattage of LED fittings- As per following parameters |
| 40 | Total lumens of the LED fittings- as per individual fittings mention below |
| 41 | Body of fittings-CRCA steel sheet with opal acrylic diffuser/ Extruded aluminium Housing CRCA front frame opal diffuser/CRCA power coated housing with high efficiency translucent diffuser. |
| 42 | Operating voltage-150 V to 265 V, AC supply or better. |
| 43 | Input frequency-50 Hz + 1 Hz |
| 44 | Power factor-Minimum 0.95 |
| 45 | Luminaire efficacy->100 lm/w |
| 46 | Color rendering index-CRI shall be 80 (minimum) |
| 47 | Working/ operating temperature-0 to + 45c or better |
| 48 | Color temperature-6000K to 6500K |
| 49 | Electronic Driver |
| 50 | Drive current (LED)-As per OEM. |
| 51 | Operating voltage-150 V to 265 V AC supply or better |
| 52 | Type of driver-Constant current output driver |
| 53 | THD-Less than 10% |
| 54 | Surge Protection-2.5 KV minimum |
| 55 | Efficiency Driver->85% |
| 56 | Protection-Shall have under voltage and over voltage protection. |
| 57 | Guarantee of LED fittings including LED driver-2 years against manufacturing defect. |
| 58 | Fixture-Should comply with LM 79 test from NABL/UL lab. |
| 59 | LED Type/ Make/ Model-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 60 | Life of LED-50000 burning hours at 70% lumen maintenance |
| 61 | LED Down Light Surface > 1800 Lumens. |
| 62 | LED Down Light Surface > 2400 Lumens. |
| 63 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. |
| 64 | 100 mm width X 50 mm depth X 1.6 mm thickness |
| 65 | 50 mm width X 50 mm depth X 1.6 mm thickness |
| 66 | Providing opening & refixing of existing cable trays & conduits in walls/ceiling , including fixing of existing cables, conduit pipes & fire alarm wires in the existing trays as desired by the Engineer-in-Charge . |
| 67 | Note:- Less credit for dismantled material (only copper wires) @Rs 5000/- - Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender