Tender For Repair And Cleaning Of Septic Tank, Drain And Chain Link Fencing At Alg Tawang Under Ge 859 Ews
Tender Value
10 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
16 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tawang → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Cleaning Of Septic Tank, Drain And Chain Link Fencing At Alg Tawang Under Ge 859 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning/clearing of IWC/EWC by roding, gully trap/floor trap incl CI pipe/PVC pipe upto first manhole by roding, taking out all residue incl waste and testing by pouring water after cleaning etc complete all as specified and directed. |
| 2 | Cleaning/clearing of sewage line 75 mm to 200mm bore of any description under ground any depth, removing any type of blockage incl desilting, descaling and de-chocking from drain as well as from manhole sludge water shall be disposed of directed incl taking of manhole cover and refixing the same after cleaning. |
| 3 | Taking out/pumping for Cleaning of accumulated sludge including contaminated sewage water from septic tanks/sokage well including inlet/outlet chambers after plugging in coming sewage lines through combined high pressure water jetting cum suction (vacum) type machine mounted on LMV/HMV and facility of high pressure vacuum and removing and dumping off the same in the tank to a place out side cantonment at the place marked for the purpose by local municipality or the authority conftolling the area complete all as specified and directed by Engr-in-Charge. |
| 4 | Demolition of Cement concrete (unreinforced) any description and in any position not otherwise specifically provided and removing the debris outside the defence land complete all as specified and as directed. |
| 5 | M&L for Plain cement concrete Type - D2 (1:4:8) (using 40mm graded stone aggregate) as in mass concrete complete all as specified and as directed. |
| 6 | Demolition of cement concrete (reinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as directed. |
| 7 | M & L for RCC nominal mix , 1:2:4, Type B1 (using 20 mm graded aggr) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 8 | M & L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 9 | M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick flat and rough finished (Horizontal or sloping). |
| 10 | Use & Waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 5cm but n exc 10cm wide. |
| 11 | M&L for Providing precast cement concrete type B1 1:2:4 (20mm graded stone aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed)setting in mortar 1:6 ,complete, in walls |
| 12 | M&L Rendering 15mm thick CM (1:4) on other than fair faces of brick work or concrete surfaces of wall , finshing the surface even and smooth without using extra cement complete. |
| 13 | Supplied only liquid WPC |
| 14 | Demolition and breaking up drain pipes 75 to 110 mm internal dia (SWG,AC , PVC or reinforce concrete) set in cement mortar including bedding and hunching complete all as directed. |
| 15 | S&F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 16 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 17 | S & F in repairs PVC (SWR) bends 110mm dia with access door any radius.all as specified and as directed |
| 18 | S & F in repairs PVC (SWR) junction single, 110mm dia with access door (Single T) equal or unequal all as specified and as directed |
| 19 | M & L for PCC 1:3:6 type C2 as in Concrete bed 110mm dia to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 20 | S & F in repairs PVC (SWR) bends 75mm dia with access door any radius.all as specified and as directed |
| 21 | S & F in repairs PVC (SWR) junction single, 75mm dia with access door (Single T) equal or unequal all as specified and as directed |
| 22 | Dismantling of posts struts (steel or RCC) any section incl taking out embedded portion in concrete or brick and making good disturbed ground |
| 23 | Dismantling of fencing wire mesh, any type |
| 24 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50 m in hard/dense soil complete all as specifed and as directed |
| 25 | S&F Mild steel work of angle iron or flat iron etc for railings, balusters, nosing to steps including embedding in concrete and screwing etc, flat iron for posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290 complete all as specified and directed. |
| 26 | S & F MS Tie bars 50mmx5mm thick with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe 290 Gde-E-165. |
| 27 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all specified and directeed. |
| 28 | M & L for Mild steel Round bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. |
| 29 | Supply only Chain Link MS galvanized fencing any size and any type complete all as specified and as directed |
| 30 | Fixing only Chain Link MS galvanized fencing including wires any mesh, size and any type of standards rails, straining bolts etc including provision of binding wires complete all as specified and as directed. |
| 31 | S & F in repairs Galvanised 2 strand steel barber wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straning and fixing to any type of standrad rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steels pins including taking down etc as directed ( Each line of wore to be measured) complete all as specified. |
| 32 | S&F in repairs Mild steel screw bolt 11 to 15 mm shank dia neck (machine made) with hexagonal or square head at one end and screws the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exc 5 cm n.exc 10 cm long complete all as specified and as directed. |
| 33 | M&L for Preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 34 | M&L for cement concrete type B0, 1:2:4 (20 mm graged aggregate) in surface channels and drains complete all as specified and directed by Engr-in-Charge. |
| 35 | Use & waste formwork to faces of walls, retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses, etc vertical or to batter, complete all as specified and directed by Engr-in-Charge. |
| 36 | M&L Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc.complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender