Tender For Repair To Brick Work, Joinery, Painting, Plumbing Work, Roofing, Pathways, Hardstanding, Walls, Drains, Fencing, Sewage Cleaning And Other Misc Repairs Under Age (I) Bhalra
Tender Value
25 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
14 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagrota → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Brick Work, Joinery, Painting, Plumbing Work, Roofing, Pathways, Hardstanding, Walls, Drains, Fencing, Sewage Cleaning And Other Misc Repairs Under Age (I) Bhalra
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 2 | Brick work with sub class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 3 | All as per item srl No-2 here-in-before but except brick complete all as specified and directed. |
| 4 | Walling of random rubble stone masonry uncoursed well bounded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed. |
| 5 | All as per item srl No-4 here-in-before but except stone complete all as specified and directed. |
| 6 | Precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in bond stones set in cement mortar 1:6 concrete in joints to match as in bond stone complete all as specified and directed. |
| 7 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified of random rubble walling with maximum depression on face from straight edge held against the dressed surface not exceeding 20 mm lime or sand stone, complete all as specified and directed. |
| 8 | Raised pointing to random rubble masonry uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and directed. |
| 9 | PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping and similar works including necessary fromwork complete all as specified and directed. |
| 10 | PVC (SWR) pipe 110 mm bore single socketed in any length with rubble ring joints as in weep holes complete all as specified and directed. |
| 11 | Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed. |
| 12 | 15 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | 15 mm thick rendering on fair faces or brick work or concrete surfaces in cement mortar 1:4 surface finished even and smooth (without using extra cement) complete all as specified and directed. |
| 14 | 20 mm thick cement plaster on stone masonry surfaces to random rubble masonry uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and directed. |
| 15 | Applying two coats of cement based paint over a coat of primer including preparation of new plastered surface complete all as specified and directed. |
| 16 | Preparation of old decorated plastered or unplastered surfaces of walls, conices etc by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of cement base paint complete all as specified and directed. |
| 17 | Preparation of new plastered surfaces of walls and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed. |
| 18 | Preparing of old surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. |
| 19 | Preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint, desigen and pattern as approved by Engineer-in-Charge complete all as specified and directed. |
| 20 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each complete all as specified. |
| 21 | All as per item srl No-20 here-in-before but exceeding 1.5 Sqm not exc 4 Sqm each complete all as specified and directed. |
| 22 | Taking down shutters exceeding 1 Sqm but not exc 2 Sqm each complete all as specified and directed. |
| 23 | Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified |
| 24 | Pressed steel frames for doors with one or more rebates including lugs, hinges, lock strike plate etc., complete frame size 105 mm x 60 mm including one shop coat of red oxide zinc chrome primer complete all as specified and directed. |
| 25 | PVC door frame of size 50 mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified and directed. |
| 26 | Plain cement concrete (1:3:6) type C-0 (using 12.5 mm graded crushed stone aggregate) filling in pressed steel chowkats, bed block for holdfast and the like all as specified and directed. |
| 27 | Factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 28 | 2nd class hard wood, glazed and skelton shutter 35 mm thick open rebated and prepared to receive glass, guage, etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR 2009 Pt-I Section 8.24(b) supplied and fitted to chowkhats, complete all as specified and directed. |
| 29 | Flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 30 | Factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement supply and fixing in the frame at site complete all as specified and directed. |
| 31 | Butt hinges, heavy weight, cold rolled mild steel 100 mm size and fixed in repairs complete all as specified and directed. |
| 32 | Aluminium anodized, barrel tower bolt of extruded section, 150 mm long complete all as specified and directed. |
| 33 | Aluminium handle, cast type, anodized, 150 mm size, fixed in repairs, complete all as specified and directed. |
| 34 | 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 35 | Helical door spring of size 300 mm including welding to steel chowkhats, fixed in reparis, complete all as specified and directed. |
| 36 | Helical door spring of size 300 mm including welding to steel chowkhats, complete all as specified and directed. |
| 37 | 150 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 38 | Preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. Please Enable Macros to View BoQ information |
| 39 | Preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender