Tender For Special Repair To Iron Gates At Certain Locations, Addn/ Altn To Walls And Flooring Near Guard Room And Misc Locations, Provn Of Mesh And Grills For Duct Area Of Gurukul, Staging For Trainees Class Rooms, Cloth Drying System Of Certain Pla
Tender Overview
Project Description
Tender for Special Repair To Iron Gates At Certain Locations, Addn/ Altn To Walls And Flooring Near Guard Room And Misc Locations, Provn Of Mesh And Grills For Duct Area Of Gurukul, Staging For Trainees Class Rooms, Cloth Drying System Of Certain Places At Aftc, Chain Link Fencing With Iron Gates At Bldg No. P-534 And Mes Qtr (Near Suraksha Enclave) At Afs Jalahalli
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m deep for foundation, shafts wells cesspit and getting out in any type of soil complete all as specified and directed. |
| 2 | Returning, filling in including spreading, levelling, watering and well ramming in layers n'exc 25cm in any type of soil for sewage pipe line, manholes sides and cleaning the site complete all as specified and directed. |
| 3 | Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exc 1.50m above from the starting point complete all as specified and directed. |
| 4 | M&L PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 5 | M&L Pre-cast PCC 1:3:6 type C1 (using 20 mm graded stone agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 built in cement mortar of any description complete all as specified and as directed. |
| 6 | M&L Cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 7 | M&L for cement plaster rendering 10mm thick in CM 1:6 on fair faces of brickwork or concrete surface as on wall finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | Material & Labour for new wall surfaces applying two coat of weather proof paint exterior wall paint over a coat of red oxide primer incl necessary preparation to give uniform and smooth finish all as specified and directed. |
| 9 | M&L for surface excavation n exc 30 cm deep and avg 15 cm deep and getting out soft/loose of soil complete all as specified and directed. |
| 10 | Demolition of brick work or stone masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, boundary wall etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.. |
| 11 | M & L walling of random rubble, uncoursed, Bangalore type masonry well bonded bedded solidly hearted built in CM 1:6, extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, key pointing to random or polygonal rubble, uncoarsed or brought upto courses in CM 1:4 all as specified and directed. |
| 12 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed. |
| 13 | S & F mild steel work in framed brackets of angle or tees, 'C' Channels, 'I' sections with web flanges cut to shape, drilled and countersunk of screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc, 10 kg each bracket, and hanging also fastening and fixing complete conforming to Gde Fe 290, Gde E-165 complete all as specified and directed. |
| 14 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1998 grade St 240 complete all as specified and directed. |
| 15 | S & F mild steel plate (plain or chequered) channels, square cut or notched (ordinary or counter sunk), forming holes with riveted, bolted or welded attachement etc. and hanging also fastening and fixing complete conforming to Gde Fe 410 W (Gde E-250 Quality A) complete all as specified and directed. |
| 16 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed. |
| 17 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.. |
| 18 | M&L for preparation of new steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.. |
| 19 | S&F gate bottom rotational MS heavy duty roller gate wheels with clamp approx 4inch suitable for turning sliding the gate 360degree , revolving and suitable for V track double bearing, to fixing the gate necessary welding and all fittings included complete all as specified and directed. |
| 20 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 21 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender