Tender For Certain Repair/Maint To Roof, False Ceiling, Maintenance And Cleaning Of Drainage Channel And Allied Connected Work In Otm And Md Accn Zone A Area Under Age B/R-I Under Ge( Central) Khadki.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
15 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair/Maint To Roof, False Ceiling, Maintenance And Cleaning Of Drainage Channel And Allied Connected Work In Otm And Md Accn Zone A Area Under Age B/R-I Under Ge( Central) Khadki.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Single or double layer Mangalore pattern or similar tiles on ridge/roofing complete all as specified and as directed. |
| 2 | Supply and fix roof tiles , Mangalore Pattern, inter locking at side joints laid dry complete all as specified and as directed. |
| 3 | Description all as per item No 2 above but (except) Mangalore tiles complete all as specifed and as directed. NOTE :- Material shall be used from dismantling. |
| 4 | Supply and fix ridge or hip tiles to suit mangalore Pattern of roofing tiles bedded and jointed in CM 1:6 complete all as specified and as directed. |
| 5 | Description all as per item No 4 above but (except) Mangalore tiles complete all as specifed and as directed. NOTE :- Material shall be used from dismantling |
| 6 | Dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified and as directed. |
| 7 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings/wall cladding etc complete all as specifed and as directed. |
| 8 | Supply and fix 0.63mm thickness Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with J-type hook bolts and washers, in roofs(in any position and bent to any radius curve), walls etc. with grade of zinc coating @ 275 gm /Sqm etc complete all as specified and as directed. |
| 9 | Supply and fix for plain, galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) by using 1.00mm thick sheet grade of zinc coating @120 Gms/Sqm both sides and welded or soldered joints are provided complete all as specified and directed. |
| 10 | Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as as specified and as directed. |
| 11 | Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 12 | Supply and fix 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. Fixed with L-type or screws J-type or cranked hook bolts complete all as specified and as directed. |
| 13 | Supply and fix second class hard wood clean sawn battens at 30 cm centre to centre and sectional area exc 5 Sqcm and not exceeding 25 Sqcm including dismantling Battens for tiles ,singles etc of any size including tiling fillets spaced exc.15 cm complete all as specified and as directed. |
| 14 | Supply and fix 2nd class H/W plain fillets, rails, rafters, purlins, square, rectangular in section clean sawn secured with nails brads exc 13 sqcm but n exc 25 sqcm including dismantling timber scantlings in fillets, rails, posts, rafters, purlins etc under 40 sq. cm in section (Unframed work) in any position complete all as specified and as directed. |
| 15 | Dismantaling timber in scantling 40 sq.cm and over in section in any position and any description unframed wk or unframed work. |
| 16 | Supply and fix timber work second class hard wood clean sawn in scantlings, complete all as specified and as directed. |
| 17 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specifed and as directed. |
| 18 | Supply and fix for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (Gde-E- 250) quality-A etc complete all as specifed and as directed. |
| 19 | Material and labour for preparation new surfaces of wood and wood based material of any description and girth and treated with two coats of creosote complete all as specified and as directed. |
| 20 | Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified. |
| 21 | Supply and fix 2 mm thick fibre glass reinforced translucent corrugated sheeting with additional reinforcement of chicken mess with two corrugation side lap fixed with 'L' or 'J' type or cranked hook bolts including dismantling of existing any type of sheeting complete all as specified and as directed. |
| 22 | Supply and fix for gypsum reinforced boards 595x595x8 to 10mm thick for ceiling on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down old/existing ceiling boards of any type (fibre, pulp insulation etc) or insulation boards any thickness incl fillets complete all as specified and as directed. |
| 23 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for, and removing the rubbish outside MoD complete all as specified and as directed. |
| 24 | Material and labour for PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) as in roof kerb or mud stop, rounded or chamferred on edge complete all as specified and as directed. |
| 25 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles. |
| 26 | Material and labour for pre-cast cement concrete solid block masonry with solid block of the grade Type C-1, (1:3:6) using 20mm graded aggregate set in CM (1:4) complete all as specified and as directed. |
| 27 | Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (CM 1:4) complete all as specified and as directed. |
| 28 | Material and labour for Raised pointing to RR masonry in CM 1:4 complete all as specified and as directed. |
| 29 | Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:4 with water profing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specifed and as directed. NOTE :- Water proofing compound shall be measured & paid separetely |
| 30 | Supply only Liquid water proofing compound complete etc all as specified and as directed. |
| 31 | Material and labour for preparing new plastered surface of walls and applying two coat of cement base paint over a coat of primer at any height including necessary scaffolding ladder etc complete all as specifed and as directed. |
| 32 | Supply and fix 2nd class hard wood 20mm thick, Boarding in roofs, ceilings, partitions, fascia barge, soffits (except flooring and skirting) planned one side, and similar work including dismantling complete all as specified and as directed. |
| 33 | Material and labour for preparation of old wood or wood based surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 34 | Material and labour for preparation of old painted steel surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender